European Commission logo
español español
CORDIS - Resultados de investigaciones de la UE
Contenido archivado el 2024-05-07

Harmonisation of Fire Resistance Testing: Thermal Aspects


By experience it is known that fire resistance furnaces yield deviating results on identical specimens although controlled within current standards. This is the main remaining problem for achieving harmonised fire resistance testing of building products in the EU.

In this project, the technical aspects of the above problem will be quantified and, where possible, solutions will be offered. The specific objectives are to:
investigate the extent to which applying Plate Thermometers to monitor furnace temperature will solve problems of reproducibility;
redesign and evaluate the calibration elements used in previous work;
investigate the reasons why differences in the thermal environment of the furnace have a large effect on the temperature observed at the unexposed side of a separating element.
The initial development work is in progress and the testing phase is expected to begin in November 1997.
Initial work will be carried out to:
redesign the calibration element for tests on building components with a separating function;
design a calibration element for tests on building elements totally engulfed by fire;
investigate the role of furnace construction parameters using a mathematical model of the heat exchange in the furnace;
design a simple, passive heat flux meter and an active heat flux meter for the non-exposed side of test specimens.
Subsequently, 24 resistance to fire tests will be carried out on well defined test specimens with furnace control by the Plate Thermometer.

Convocatoria de propuestas

Data not available

Régimen de financiación

CSC - Cost-sharing contracts


Aportación de la UE
Sin datos
5,Lange Kleiweg 5
Países Bajos

Ver en el mapa

Coste total
Sin datos

Participantes (10)