Objectif
It is now widely accepted that the nature of the topography of a surface has a significant influence on the efficiency and functional performance of the surface and in order to fully study and control surface manufacture, studies need to be carried out from a 3-D perspective. The vast majority of research, industrial applications and national international roughness standards were based on 2-D measurement techniques. The assumptions was that 2-D profiles were a sufficiently valid representation of 3-D surfaces; however it is now clear that the characteristics of surfaces cannot be completely interpreted without 3-D information. Clearly a basis for written standards for 3D surface characterisation is needed.
The research concentrates on the visual and statistical characterisation, calibration, filtering of surface mapping data. The proposed measurement procedures and surface characterisation parameters will undergo rigorous examination on a range of engineering surfaces so that functional significance can be determined and their validity demonstrated. The overall objective will be clear and unambiguous:-
1) The work will provide tested and validated procedures and techniques that help industry to carry out better surface measurements, which conform to a recognised written standards under the GPS format.
2) Additionally the work will provide a basis for technical communication by standardising measurement procedures and instrument calibration and surface characterisation. This serves towards the facilitation of a common set of procedures which will be used by the large surface topography community within the E.U.
The workprogramme will be split into 7 parallel workpackages dealing with the issues of surface parameterisation and parameter verification, 3D filtering, areal characterisation, instrumentation calibration of optical, stylus and AFM instruments. Surface data archiving and as a result the drafting of the basis of new written surface roughness standards will also be addressed. To illustrate the usefulness of the above work a range of functional surface behaviours will be investigated through the implementation of 3D surface measurement and characterisation techniques. The surfaces include automotive cylinder bores, sheet steel, bearings and human hip joint replacement surfaces. Finally sensible guidelines for the industrial implementation of 3D techniques for the assessment of functional surfaces will be outlined.
Champ scientifique (EuroSciVoc)
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
Vous devez vous identifier ou vous inscrire pour utiliser cette fonction
Programme(s)
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Thème(s)
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Appel à propositions
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Données non disponibles
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Régime de financement
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Coordinateur
HD1 3DH Huddersfield
Royaume-Uni
Les coûts totaux encourus par l’organisation concernée pour participer au projet, y compris les coûts directs et indirects. Ce montant est un sous-ensemble du budget global du projet.