Objetivo
Background The lasting and bottoming operations are crucial to good shoemaking as this is where the shoe is given its three- dimensional shape and where the shoe bottom is attached. During the lasting process the upper is stretched around the shoe last using a machine that pulls the upper. Poor machine control can result in a shoe that is of poor shape and of low customer appeal or can result in a shoe that fails in wear. The bottoming process is where the sole of the shoe is applied to the lasted upper commonly using adhesive and a combination of heat and pressure. Incorrectly set process parameters can lead to sole adhesion failure in wear and this is the major single cause of customer returns. The majority of shoe manufacturers in the Community are SMEs and their current method of setting up machines in the lasting and bottoming areas is dependent largely on following the suppliers' recommendations and then judging the results by eye. Improvements are then made by trial- and-error, which is very time consuming and leads to significant production losses. A means of measuring and interpreting the pressure, dynamically, between the upper and the last would greatly assist shoe manufacturers in the rapid set up and optimisation of the relevant machines and processes.
Objectives The objective of this project is to develop improved monitoring and control system for the lasting and bottoming operations. This will lead to improvements in quality of the finished product with greater efficiency in production due to faster machine set up times together with a better means of training new operatives. The expected benefits are: a. Enhanced quality by improving the appearance and fitting characteristics of the finished footwear leading to enhanced customer appeal. b. Fewer customer returns caused by failure of the shoe in wear. The single biggest cause of customer returns is poor sole adhesion, representing approximately 25% of all returns, and is of considerable concern to all European shoe manufacturers. c. Improved machine set up times in the lasting and bottoming area of shoemaking. This will significantly reduce production losses associated with resetting of machines and processes. d. An improved method of training of new operatives in the lasting and making areas.
Work programme To meet these objectives a pressure mapping system will be developed in the form of a re-usable pressure sensor array linked to a portable PC. The approach will be to identify and incorporate non-intrusive thin pressure sensors fixed to a re-usable and flexible substrate and interfaced to a portable computer running a purpose written programme to show the resulting pressure map. Experimentation will be undertaken to identify the optimum number and location of sensors that will provide sufficient information without overcomplicating the array. A vital part of the work will be to develop the software that will interpret the sensor measurements and then present the information generated on the computer screen in such a form that is meaningful to the operative so that the results can be acted upon.
State of progress The project has recently started. There is no progress to report at the moment.
Ámbito científico (EuroSciVoc)
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..
- ciencias naturales informática y ciencias de la información software
- ingeniería y tecnología ingeniería eléctrica, ingeniería electrónica, ingeniería de la información ingeniería electrónica sistemas de automatización y control
- ingeniería y tecnología ingeniería eléctrica, ingeniería electrónica, ingeniería de la información ingeniería electrónica sensores
Para utilizar esta función, debe iniciar sesión o registrarse
Programa(s)
Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.
Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.
Tema(s)
Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.
Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.
Convocatoria de propuestas
Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.
Datos no disponibles
Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.
Régimen de financiación
Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.
Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.
Coordinador
NN29 7RY Wellingborough
Reino Unido
Los costes totales en que ha incurrido esta organización para participar en el proyecto, incluidos los costes directos e indirectos. Este importe es un subconjunto del presupuesto total del proyecto.