Objetivo
To provide a consistent set of data to validate predictive techniques and to improve phenomenological models to predict the effects of explosion.
It has been established that damaging overpressures can be generated only by flammable vapour clouds burning in congested areas.
There are still large gaps in our knowledge on vapour cloud explosions. Considering, for example, the jet release of a flammable gas from a pressurized pipe or vessel. The turbulence due to the jet release will enhance the combustion rate if this jet is ignited. The influence of various parameters such as the location and time of ignition, the release rate and scale are unknown. Although both computer codes and physical modelling experiments are currently used as predictive tools, these predictive techniques have never been compared against a consistent set of data at different scales, with different fuels and different obstruction parameters. Furthermore, the way that combustion has been modelled in the numerical techniques is very basic and probably needs further improvement.
There are 3 main work programmes as follows.
Generation of experimental data concerning the effect of obstructed regions on flame propagation. Large, medium and small scale experiments will be undertaken using different fuels comparing a wide range of venting with obstacles of different blockage blast pressure and flame speed will be monitored.
Generation of experimental data to quantify the effect on flame propagation of the turbulence generated by a jet release. Experiments will be performed to quantify the effects of explosion of flammable vapour clouds during discharge from a pressurised vessel or pipeline.
3) Development of combustion models. It is proposed to develop a turbulent reaction model incorporating reduced reaction mechanisms and a probability distribution function(PDF) transport equation model.
Ámbito científico (EuroSciVoc)
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véase: https://op.europa.eu/en/web/eu-vocabularies/euroscivoc.
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véase: https://op.europa.eu/en/web/eu-vocabularies/euroscivoc.
Para utilizar esta función, debe iniciar sesión o registrarse
Le pedimos disculpas, pero se ha producido un error inesperado durante la ejecución.
Necesita estar autentificado. Puede que su sesión haya finalizado.
Gracias por su comentario. En breve recibirá un correo electrónico para confirmar el envío. Si ha seleccionado que se le notifique sobre el estado del informe, también se le contactará cuando el estado del informe cambie.
Tema(s)
Datos no disponiblesConvocatoria de propuestas
Datos no disponiblesRégimen de financiación
CSC -Coordinador
2280 AA RIJSWIJK ZH
Países Bajos