Objectif
Water sprays are used extensively in the petrochemical
exploration, production and processing industries both onshore and offshore to mitigate the effects of fire on equipment and structures. This can be achieved in several ways, for example by extinguishment of the fire, by cooling either the fire or the surface to be protected, or by providing a protective curtain to absorb radiative heat flux. Fine water sprays may also have
potential for explosion suppression.
Failure to provide adequate protection in the event of fire could lead to loss of life, structural failure or damage and loss of containment of hydrocarbon products with an accompanying
pollution risk.
Regulations governing the use of water sprayers are relatively general. It is usual for rules to specify only the surfaces to be protected, the minimum water application rates and the length of time protection is required. These application rates are
likely to have been based on limited experimental results and "engineering experience".
Although the use of a spraver may be characterized by a water application rate, the effectiveness of the sprayer depends also on the water droplet distribution and on the fire scenario
involved. For some situations the droplet must be of sufficient size and velocity to penetrate and cool the fire plume. In
others droplets should present a large surface area to absorb radiation. Size and velocity of droplets are important in any situation where wind may be present.
The aim of this proposal is-i) to determine optimum droplet size and velocity distributions as well as mass flux for protection from a number of fire scenarios likely to arise in the
petrochemical industry and ii) to relate these to the physical characteristics of the water spraying device. It should then be possible iii) to design and prototype an efficient sprayer with these optimum characteristics.
In order to accomplish these objectives a combined theoretical and experimental programme of work is needed.
A major part of the programme of work will involve an analysis of the way in which water sprays interact with various selected scenarios. This will be done theoretically by examinining droplet ballistics, heat transfer and cooling processes and
experimentally, following construction of a device to produce droplets of a variable but specifiable size and velocity, by examining the interaction of such droplets with small scale
fires. Information at this basic level will be invaluable for assessing the performance of existing water spray devices, and also for providing a sound technical basis for the future
development of regulations for water spray protection. The
information will also be used in the second part of the work programme in which the water spray characteristics will be
related to the physical characteristics of the spray devices and a spray head producing the optimum droplet characteristics
designed and prototyped.
Champ scientifique (EuroSciVoc)
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
- sciences naturelles sciences chimiques chimie organique hydrocarbures
- sciences naturelles sciences de la Terre et sciences connexes de l'environnement sciences de l'environnement pollution
Vous devez vous identifier ou vous inscrire pour utiliser cette fonction
Programme(s)
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Thème(s)
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Données non disponibles
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Appel à propositions
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Données non disponibles
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Régime de financement
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Coordinateur
40220 Tarnos
France
Les coûts totaux encourus par l’organisation concernée pour participer au projet, y compris les coûts directs et indirects. Ce montant est un sous-ensemble du budget global du projet.