Objectif
The final purpose of this project is the full automation of the drilling operation. The aim of Part 2 is to obtain a complete automation of screwing and racking devices in the derrick.
These devices have already been automated individually within the scope of project TH 02024/84 Drilling automation Part 1. The last phase of this project is to complete automation of the power swivel previously developed within part 1 thanks to the handling equipment depending directly on the power swivel allowing overdrill and automatic connection and disconnection operations at any height inside the derrick. The new design of this second generation Power Swivel handling equipment is modular, so future improvements could be made separately for each module and also the drilling process will not be stopped because of troubles of only one module.
Phase 1 - Start-up and manual operating tests completed.
Phase 2 - Automation intended for the synchronization of machines have been supplied and assembled on the GELOS site in a pressurized panel. Synchronization softwares have been written, tested in laboratories and at real scale.
Phase 3 - Software intended for the comprehension of PSO commands by the BLM machines has been written and tested.
Phase 4 - After manual start-up of racking machine, all the BLM machines will be ready for connection to the PSO computer for the handling integrated robotisation.
Phase 5 - Completed.
1. Improve the automation of hooking systems namely by increasing the handling capacity of the lower racking machine for the triples up to 9 tons so to handle the drill collars.
2. Realise a single automation linking the following operations :
- screwing-unscrewing (BIL-K)
- transfer of BIL-K to bottom racking
- racking on lower position
- racking upper position.
3. Improve handling beyond the drilling floor area to replace pneumatic wirelines and winches presently used by safer systems based on jacks, winches and robots.
4. Manufacture of an actuator for the brake band
5. Realisation of power swivel automation equipment, namely : - connection module (or tool joint breaker): this module is able to make the connection between the power swivel and the drill stem at any height inside the derrick, and also to dismantle or to connect lower parts of the power swivel shaft for easy maintenance (i. e. : Kelly cocks, Saver sub).
- handling module : this module improves handling operationsduring tripping phases by tilting, to convenient position, the elevator which catches the pipe standing out the racking board,
- threading compensation module : this module avoids the damage of the tool joint thread during connection of power swivel to drill stem
.
Without this module the total weight of the power swivel (19 tons) should be supported by the power swivel saver sub pin threads and by the upper tool joint box threads of the drill stem.
Champ scientifique (EuroSciVoc)
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
Ce projet n'a pas encore été classé par EuroSciVoc.
Proposez les domaines scientifiques qui vous semblent les plus pertinents et aidez-nous à améliorer notre service de classification.
Vous devez vous identifier ou vous inscrire pour utiliser cette fonction
Programme(s)
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Thème(s)
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Appel à propositions
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Données non disponibles
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Régime de financement
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Coordinateur
92500 Rueil Malmaison
France
Les coûts totaux encourus par l’organisation concernée pour participer au projet, y compris les coûts directs et indirects. Ce montant est un sous-ensemble du budget global du projet.