Objectif
This project involves study of the basic components that are implicit in any general offshore petroleum exploitation project in deep waters involving subsea wellheads, a floating production support, links between the bottom and the surface and appropriate product evacuation facilities.
The purpose of the project is to obtain the necessary engineering data, to build prototypes and to test the critical components so as to define their limits of use.
The work covered the following components and processes :
Anchorage : a prototype detector of anchor line faults was tested in the laboratory on samples of anchor cables featuring significant defects.
Riser : the hydrodynamic loads that a production riser undergoes were subjected to systematic tests on a testing tank model. The results of these tests have been analysed and the general architecture of the riser defined.
Subsurface link : while not calling the principle of the method into question, experiments conducted in 1978 on a flexible arch in the mediterranean were a failure, owing to the inadequacy of the logistic facilities and sea states that were abnormally poor for the season.
Laying and connection of a flowline : the flowline laying and connecting method studied under this contract is based on a j-configuration laying method; the method did not qualify for a demonstration test, since use of surface supports would have resulted in very high costs. A test based on amethod of towing near the bottom was preferred to it and is to take place during the first half of 1981.
Operations inside wells using the t.F.L. Technique : adaptation of the t.F.L. Technique to lines with a diameter of 4" was successfully achieved, while at the same time enabling the endurance of the equipment to be analysed and the equipment best suited to pumped-tool operations to be selected.
Electrical connectors that can be plugged-in underwater : testing of deutsch connectors was continued throughout 1980 to simulate several years of underwater operation.
Horizontal diphasic flows : laminated flow and plug flow conditions were tested in a 6" loop line. Test equipment and multimetric models were developed to enable systematic experiments to be performed.
Pollution prevention : a simulated programme of rising of oil and gas through water to the surface was tested and technical manuals on using the design programme were drafted.
Champ scientifique (EuroSciVoc)
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
Ce projet n'a pas encore été classé par EuroSciVoc.
Proposez les domaines scientifiques qui vous semblent les plus pertinents et aidez-nous à améliorer notre service de classification.
Vous devez vous identifier ou vous inscrire pour utiliser cette fonction
Programme(s)
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Thème(s)
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Appel à propositions
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Données non disponibles
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Régime de financement
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Coordinateur
92500 Rueil Malmaison
France
Les coûts totaux encourus par l’organisation concernée pour participer au projet, y compris les coûts directs et indirects. Ce montant est un sous-ensemble du budget global du projet.