Objetivo
The aim of the project is to reduce the exploitation costs of reservoirs affected by water production in production wells and under difficult environmental conditions : offshore, heterogeneities, high temperature, low or very high permeability of reservoirs.
PHASE 1 : Lab work was performed by RWE-DEA and IFP in order to fit in with the different characteristics of the reservoirs in extreme conditions. Technical solutions were investigated for each specific reservoir conditions.
PHASE 2 : Well tests : different candidate wells were proposed by each operating company Elf Aquitaine and RWE-DEA. The feasibility studies included both complementary lab studies in actual reservoir conditions and also numerical simulations in order to deliver a precise design of the treatment and to formulate technico-economical predictions.
Finally 4 well tests were performed instead of the 5 to 7 initially scheduled. Two of them correspond to the high-temperature reservoir conditions (PLOEN-OST, ALWYN NORTH), and two other (MITTELPLATE, BAVO) to the high-permeability reservoir conditions. No appropriate candidate well was found corresponding to the low permeability reservoir conditions.
PHASE 3 : Well tests
PLOEN-OST (RWE-DEA) : a detected casing deformation prior to the treatment did not allow to perform the polymer injection.
MITTELPLATE (RWE-DEA) : the treatment allowed to stop the increase in watercut but the expected reduction could not be achieved presumably because the formation permeability was even higher than expected.
ALWYN NORTH (ELF A) : the treatment was performed in two steps : treatment by polymer of the upper Tarbert reservoir and perforations of the lower Tarbert and upper Ness reservoirs. According to a parametric study in order to evaluate the benefit of the treatment, the uncertainty in incremental oil evaluation is very large. It is therefore not possible to conclude.
BAVO (ELF A) : Immediately after the treatment the watercut stabilized during 2 months to the value before treatment. After this time and until the shut-in of the well large variations were observed both in the watercut and the overall production rate. A full field study is in progress in order to conclude or not to a beneficial effect a posteriori.
CONCLUSIONS :
Lab work gave some promising prospects. 4 patents were filed. 4 field tests were performed.
The purpose of the project is to develop processes for the control of water production in petroleum reservoirs under extreme conditions.
Phase 1 : The foreseen solutions to be developed in the lab are based on :
- low hydrodynamic volume polymers, for low permeability reservoirs
(K < 100 mD)
- formulations containing polymers and thermal stabilizers, for high
temperature reservoirs (T > 95 deg. C)
- low crosslinked polymer systems or alternative gel systems for high
permeability reservoirs (K > 1000 mD) and of low clay content.
Phase 2 : A methodology for in-well tests will be developed according to the following steps :
- diagnosis of water production from exploitation data
- study of sensitivity towards reservoir parameters
- study of the mechanisms of action
- risks of well plugging
- definition of the well test programme.
Phase 3 : A technical and economic evaluation will allow to define the application domains for processes developed within the project.
Ámbito científico (EuroSciVoc)
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..
CORDIS clasifica los proyectos con EuroSciVoc, una taxonomía plurilingüe de ámbitos científicos, mediante un proceso semiautomático basado en técnicas de procesamiento del lenguaje natural. Véas: El vocabulario científico europeo..
Este proyecto aún no se ha clasificado con EuroSciVoc.
Sugiera los ámbitos científicos que considere más relevantes y ayúdenos a mejorar nuestro servicio de clasificación.
Para utilizar esta función, debe iniciar sesión o registrarse
Programa(s)
Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.
Programas de financiación plurianuales que definen las prioridades de la UE en materia de investigación e innovación.
Tema(s)
Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.
Las convocatorias de propuestas se dividen en temas. Un tema define una materia o área específica para la que los solicitantes pueden presentar propuestas. La descripción de un tema comprende su alcance específico y la repercusión prevista del proyecto financiado.
Convocatoria de propuestas
Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.
Datos no disponibles
Procedimiento para invitar a los solicitantes a presentar propuestas de proyectos con el objetivo de obtener financiación de la UE.
Régimen de financiación
Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.
Régimen de financiación (o «Tipo de acción») dentro de un programa con características comunes. Especifica: el alcance de lo que se financia; el porcentaje de reembolso; los criterios específicos de evaluación para optar a la financiación; y el uso de formas simplificadas de costes como los importes a tanto alzado.
Coordinador
92500 Rueil Malmaison
Francia
Los costes totales en que ha incurrido esta organización para participar en el proyecto, incluidos los costes directos e indirectos. Este importe es un subconjunto del presupuesto total del proyecto.