Objectif
Enhanced oil recovery operations through continuous steam drive are often penalized by the irregular displacement of the injected steam owing to the reservoir heterogeneities. Hence, this phenomenon provokes sweeping anomalies and often a final recovery rate that is lower than expected. The solution consists in injecting, together with the steam, a foam which blocks the preferential passages and thus improves sweeping.
The object of this project is to determine the optimal application conditions of this technique while setting up a real size pilot on the field.
Only Phase 1 has been carried out. During the second term of 1986, economic conditions have led to the interruption of the steam injection on the POSO CREEK site in California, which had been chosen for the pilot test. A new test site had been sought to try to valorize the work achieved during Phase 1. But not other field among those under steam injection within the contacted European companies presented the required conditions. Interruption of the project was thus solicited.
Laboratory tests carried out in the POSO CREEK field conditions enabled selection of different technical alternatives.
Some foaming agents, available on the market, presented sufficient foaming and stability characteristics for the implementation conditions of this site. Characteristics of solutions to be injected (product contents, foam quality . . . ) have been determined. Preference was given to nitrogen rather than air as regards the complementary gas phase of the steam; indeed, even at the POSO CREEK injection temperature, the presence of oxygen was prejudiciable to the stability of foaming agents.
Displacement tests in "double porositylpermeability" media allowed to quantify the plugging capacity of foam in high permeability media.
This project includes 3 phases :
- Preparation of the pilot
- Execution of the pilot and tests
- Interpretation of tests.
The first phase consists of choosing a test site, where sweeping anomalies have already been observed and located during steam drive , and thus a site where it may be easier to assess the efficiency of the process. Once this site will have been chosen, laboratory tests will allow, under real reservoir conditions, to test the foaming agents and their stability, and to choose the type of gas to inject so to obtain good performances. These tests should also allow to specify the optimal operating conditions.
The second phase will concern the realization of the pilot on the chosen site. After a number of zone characterization tests (well tests, interference tests, tracers. . . ) it will be possible to begin the foam injection tests. According to forecasts, the pilot will require a series of foam plug injections in order to obtain a significant and lasting effect. Various formulations and operating conditions are necessary to optimize the process.
The third phase will consist in interpreting these tests : evaluation of sweeping and recovery rate improvement, technical and economical result of the process.
Champ scientifique (EuroSciVoc)
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
CORDIS classe les projets avec EuroSciVoc, une taxonomie multilingue des domaines scientifiques, grâce à un processus semi-automatique basé sur des techniques TLN. Voir: Le vocabulaire scientifique européen.
Ce projet n'a pas encore été classé par EuroSciVoc.
Proposez les domaines scientifiques qui vous semblent les plus pertinents et aidez-nous à améliorer notre service de classification.
Vous devez vous identifier ou vous inscrire pour utiliser cette fonction
Programme(s)
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Programmes de financement pluriannuels qui définissent les priorités de l’UE en matière de recherche et d’innovation.
Thème(s)
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Les appels à propositions sont divisés en thèmes. Un thème définit un sujet ou un domaine spécifique dans le cadre duquel les candidats peuvent soumettre des propositions. La description d’un thème comprend sa portée spécifique et l’impact attendu du projet financé.
Appel à propositions
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Données non disponibles
Procédure par laquelle les candidats sont invités à soumettre des propositions de projet en vue de bénéficier d’un financement de l’UE.
Régime de financement
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Régime de financement (ou «type d’action») à l’intérieur d’un programme présentant des caractéristiques communes. Le régime de financement précise le champ d’application de ce qui est financé, le taux de remboursement, les critères d’évaluation spécifiques pour bénéficier du financement et les formes simplifiées de couverture des coûts, telles que les montants forfaitaires.
Coordinateur
92500 Rueil Malmaison
France
Les coûts totaux encourus par l’organisation concernée pour participer au projet, y compris les coûts directs et indirects. Ce montant est un sous-ensemble du budget global du projet.