Objective
The CO-PILOT project addresses the field of nanocomposites which has witnessed remarkable progress (compound annual growth rate of 18%) in recent years with many different types of nanocomposites exhibiting radically enhanced properties for a wide range of industrial applications.
The CO-PILOT project aims to develop an open access infrastructure for SMEs interested in the production of high quality (multi-)functional nanocomposites on a pilot scale.
In CO-PILOT this infrastructure will be prepared for access (‘open acess’) by SME’s beyond the project. It will be able to produce typically 20 to 100 kg nanocomposite product, characterize it and validate its performance. This is sufficient to make management decisions to progress to the next step of new nanocomposite product development.
CO-PILOT aims to set new standards for high-quality nanoparticle production with the assistance of in-line nanoparticle dispersion quality monitoring.
CO-PILOT chooses to develop a centrifuge module to address the adequate and automated down-stream processing of the nanoparticle dispersions.
CO-PILOT will test and validate the pilot line infrastructure. Based on the consultation of SME nanocomposite producers, CO-PILOT has chosen the following range of industrial nanocomposite applications :
- flame and smoke inhibiting polymer materials (layered double hydroxides)
- acid scavenging used as anti-corrosion and in polymer stabilisation (layered hydroxides)
- heat isolating plastics (hollow/porous silica)
- light-weight flame inhibiting composites (layered hydroxides combined with hollow/porous
silica)
- UV protective polymer coatings (zinc oxide, titanium dioxide)
- high refractive index, visually transparent polymer (titanium dioxide)
- low-refractive index polymer (hollow/porous silica)
- anti-glare polymer coatings (hollow/porous silica)
- magnetic recoverable catalyst nano-composite beads (magnetite).
Fields of science
Programme(s)
Funding Scheme
RIA - Research and Innovation actionCoordinator
2595 DA Den Haag
Netherlands
See on map
Participants (13)
Legal entity other than a subcontractor which is affiliated or legally linked to a participant. The entity carries out work under the conditions laid down in the Grant Agreement, supplies goods or provides services for the action, but did not sign the Grant Agreement. A third party abides by the rules applicable to its related participant under the Grant Agreement with regard to eligibility of costs and control of expenditure.
52074 Aachen
See on map
80686 Munchen
See on map
97076 Wurzburg
See on map
51373 LEVERKUSEN
See on map
1700 Freiburg
See on map
The organization defined itself as SME (small and medium-sized enterprise) at the time the Grant Agreement was signed.
25000 Besancon
See on map
The organization defined itself as SME (small and medium-sized enterprise) at the time the Grant Agreement was signed.
EH14 4AP Edinburgh
See on map
The organization defined itself as SME (small and medium-sized enterprise) at the time the Grant Agreement was signed.
D02 CX56 DUBLIN 2
See on map
77933 Lahr
See on map
The organization defined itself as SME (small and medium-sized enterprise) at the time the Grant Agreement was signed.
92421 SCHWANDORF
See on map
5612 AR Eindhoven
See on map
The organization defined itself as SME (small and medium-sized enterprise) at the time the Grant Agreement was signed.
6167 RD GELEEN
See on map
6181 MA ELSLOO
See on map