Community Research and Development Information Service - CORDIS

Next generation of superhard non-CRM materials and solutions in tooling

From 2016-02-01 to 2020-01-31, ongoing project | Flintstone2020 Website

Project details

Total cost:

EUR 4 996 180

EU contribution:

EUR 4 996 180

Coordinated in:

Sweden

Call for proposal:

H2020-SC5-2015-one-stageSee other projects for this call

Funding scheme:

RIA - Research and Innovation action

Objective

Deliverables

Publications

  • Computational and Experimental Inverse Problem Approach for Determination of Time Dependency of Heat Flux in Metal Cutting
    Author(s): V. Kryzhanivskyy, V. Bushlya, O. Gutnichenko, R. M'Saoubi, J. E. Ståhl
    Published in: Procedia CIRP, issue Volume 58, 2017. Page(s) 122-127.  ISSN: 2212-8271
  • Sensitivity of Colding tool life equation on the dimensions of experimental dataset
    Author(s): D. Johansson, S. Hägglund, V. Bushlya, J.-E. Ståhl
    Published in: Journal of Superhard Materials, issue Volume 39 (4), 2017. Page(s) 67-79.  ISSN: 1063-4576
  • On melting of boron subnitride B13N2 under pressure
    Author(s): V. L. Solozhenko, V. A. Mukhanov
    Published in: Journal of Superhard Materials, issue 39/2, 2017. Page(s) 147-148.  ISSN: 1063-4576
    DOI: 10.3103/S1063457617020113
  • Thermoelastic equation of state of boron subphosphide B12P2
    Author(s): V. L. Solozhenko, K. A. Cherednichenko, O. O. Kurakevych
    Published in: Journal of Superhard Materials, issue 39/1, 2017. Page(s) 71-74.  ISSN: 1063-4576
    DOI: 10.3103/S1063457617010099
  • Wear mechanisms of uncoated and coated cemented carbide tools in machining lead-free silicon brass
    Author(s): Bushlya, V., Johansson, D., Lenrick, F., Ståhl, J.-E., Schultheiss, F.
    Published in: Wear, issue Volume 376-377, 2017. Page(s) 143-151.  ISSN: 0043-1648
  • Thermodynamic calculation of the phase diagram for the Al–B–C system at pressure 7.7 GPa
    Author(s): V. Z. Turkevich, D. A. Stratiichuk, D. V. Turkevich
    Published in: Journal of Superhard Materials, issue 38/6, 2016. Page(s) 423-426.  ISSN: 1063-4576
    DOI: 10.3103/S1063457616060071
  • Superhard pcBN tool materials with Ti3SiC2 MAX-phase binder: Structure, properties, application
    Author(s): Kolabylina, T., Bushlya, V., Petrusha, I., Johansson, D., Ståhl, J.-E., Turkevich, V.
    Published in: Journal of Superhard Materials, issue Volume 39 (3), 2017. Page(s) 155-165.  ISSN: 1063-4576
  • Correlation between edge radius of the cBN cutting tool and surface quality in hard turning
    Author(s): T. Zhao, M. Agmell, J. Persson, V. Bushlya, J. E. Ståhl, J. M. Zhou
    Published in: Journal of Superhard Materials, issue Volume 39 (4), 2017. Page(s) 41-51.  ISSN: 1063-4576
  • Performance and wear mechanisms of novel superhard diamond and boron nitride based tools in machining Al-SiCp metal matrix composite
    Author(s): Bushlya, V., Lenrick, F., Gutnichenko, O., Petrusha, I., Osipov, O., Kristiansson, S., Stahl, J.-E.
    Published in: Wear, issue Volume 376-377, 2017. Page(s) 152-164.  ISSN: 0043-1648
  • Influence of tool material and tool wear on tool temperature in hard turning reconstructed via inverse problem solution
    Author(s): Kryzhanivskyy, V., Bushlya, V., Gutnichenko, O., M’Saoubi, R., Ståhl, J.-E.
    Published in: Journal of Superhard Materials, issue Volume 39 (3), 2017. Page(s) 192-202.  ISSN: 1063-4576
  • Thermobaric sintering of cubic boron nitride in the presence of unstable iron and chromium nitrides.
    Author(s): I.A. Petrusha, Yu.O. Melniichuk, V.M. Bushlya, N.M. Bilyavyna, O.S. Osipov, D.A. Stratiichuk, T.I. Smirnova, K.V. Slipchenko
    Published in: Proceedings of the Conference “Rock Destructive and Metal Machining Tools” in Truskavets, 2016. 
  • Study of phase formation in the Nb–Cr–CDiam., Ta–Cr–CDiam., Zr–Nb–CDiam. and V–Cr–C.Diam systems at the silicon penetration condition
    Author(s): D.A. Stratiichuk, O.S. Osipov, K.V. Slipchenko, V.Z. Turkevich
    Published in: Proceedings of the Conference “Rock Destructive and Metal Machining Tools” in Truskavets, issue Annualy, 2016. 

Coordinator

LUNDS UNIVERSITET
Sweden

EU contribution: EUR 1 142 625


Paradisgatan 5c
22100 LUND
Sweden
Activity type: Higher or Secondary Education Establishments

Contact the organisation

Participants

TECHNISCHE UNIVERSITAET BERGAKADEMIE FREIBERG
Germany

EU contribution: EUR 741 875


AKADEMIESTRASSE 6
09599 FREIBERG
Germany
Activity type: Higher or Secondary Education Establishments

Contact the organisation

V.N. BAKUL INSTITUTE FOR SUPERHARD MATERIALS OF THE NATIONAL ACADEMY OF SCIENCES
Ukraine

EU contribution: EUR 324 375


2, Avtozavodskaya Str.
04074 KIEV
Ukraine
Activity type: Research Organisations

Contact the organisation

CENTRE NATIONAL DE LA RECHERCHE SCIENTIFIQUE CNRS
France

EU contribution: EUR 695 375


RUE MICHEL ANGE 3
75794 PARIS
France
Activity type: Research Organisations

Contact the organisation

BIFA UMWELTINSTITUT GMBH
Germany

EU contribution: EUR 491 555


AM MITTLEREN MOSS 46
86167 AUGSBURG
Germany
Activity type: Other

Contact the organisation

SECO TOOLS AB
Sweden

EU contribution: EUR 324 375


BJORNBACKSVAGEN 2
73782 FAGERSTA
Sweden
Activity type: Private for-profit entities (excluding Higher or Secondary Education Establishments)

Contact the organisation

ELEMENT SIX (UK) LIMITED
United Kingdom

EU contribution: EUR 653 750


GLOBAL INNOVATION CENTRE FERMI AVENUE
OX11 0QR HARWELL OXFORDSHIRE DIDCOT
United Kingdom
Activity type: Private for-profit entities (excluding Higher or Secondary Education Establishments)

Contact the organisation

BOUKJE.COM CONSULTING BV
Netherlands

EU contribution: EUR 308 000


ZWANENDREEF 2
2665 EM BLEISWIJK
Netherlands
Activity type: Private for-profit entities (excluding Higher or Secondary Education Establishments)

Contact the organisation

SANDVIK MINING & CONSTRUCTION TOOLS AB
Sweden

EU contribution: EUR 314 250


.
811 81 SANDVIKEN
Sweden
Activity type: Private for-profit entities (excluding Higher or Secondary Education Establishments)

Contact the organisation

Follow us on: RSS Facebook Twitter YouTube Managed by the EU Publications Office Top