Next generation of superhard non-CRM materials and solutions in tooling

Deliverables

20 publications either in international journals or through relevant conferences
Public website online
Stakeholders workshops

Tool Cost to Performance Ratio
Wear model
Report on performance analysis
Second report on task 1.1
Tool design
First report on task 1.1
Report on specialized setups

Publications

Development of a simulation model to study tool loads in pcBN when machining AISI 316L

Author(s): Mathias Agmell, Volodymyr Bushlya, Sampsa V. A. Laakso, Aylin Ahadi, Jan-Eric Ståhl
Published in: The International Journal of Advanced Manufacturing Technology, Issue 96/5-8, 2018, Page(s) 2853-2865, ISSN 0268-3768
Publisher: Springer Verlag
DOI: 10.1007/s00170-018-1673-y

Influence of oxygen on the tool wear in machining

Author(s): Volodymyr Bushlya, Filip Lenrick, Jan-Eric Ståhl, Rachid M’Saoubi
Published in: CIRP Annals, Issue 67/1, 2018, Page(s) 79-82, ISSN 0007-8506
Publisher: Hallwag AG
DOI: 10.1016/j.cirp.2018.03.011

Influence of GnP additive to vegetable oil on machining performance when MQL-assisted turning Alloy 718

Author(s): Oleksandr Gutnichenko, Volodymyr Bushlya, Sverker Bihagen, Jan-Eric Ståhl
Published in: Procedia Manufacturing, Issue 25, 2018, Page(s) 330-337, ISSN 2351-9789
Publisher: Elsevier
DOI: 10.1016/j.promfg.2018.06.091

Application of Colding tool life equation on the drilling fiber reinforcement polymers

Author(s): Andrew Hrechuk, Daniel Johansson, Volodymyr Bushlya, Leonid Devin, Jan-Eric Ståhl
Published in: Procedia Manufacturing, Issue 25, 2018, Page(s) 302-308, ISSN 2351-9789
Publisher: Elsevier
DOI: 10.1016/j.promfg.2018.06.087

Equivalent Chip Thickness and its Influence on Tool Life

Author(s): Daniel Johansson, Rebecka Lindvall, Malin Fröström, Volodymyr Bushlya, Jan-Eric Ståhl
Published in: Procedia Manufacturing, Issue 25, 2018, Page(s) 344-350, ISSN 2351-9789
Publisher: Elsevier
DOI: 10.1016/j.promfg.2018.06.102

Selecting Cutting Data Tests for Cutting Data Modeling Using the Colding Tool Life Model

Author(s): Daniel Johansson, Ville Akujärvi, Sören Hägglund, Volodymyr Bushlya, Jan-Eric Ståhl
Published in: Procedia CIRP, Issue 72, 2018, Page(s) 197-201, ISSN 2212-8271
Publisher: Elsevier
DOI: 10.1016/j.procir.2018.03.035

An inverse problem for retrieving time dependency of heat flux in metal cutting via linear programming

Author(s): V. Kryzhanivskyy, O. Shupikov, V. Bushlya, O. Gutnichenko, M. Hörndahl, R. M’Saoubi, J.-E. Ståhl
Published in: Procedia Manufacturing, Issue 25, 2018, Page(s) 287-293, ISSN 2351-9789
Publisher: Elsevier
DOI: 10.1016/j.promfg.2018.06.085

Heat flux in metal cutting: Experiment, model, and comparative analysis

Author(s): V. Kryzhanivskyy, V. Bushlya, O. Gutnichenko, R. M'Saoubi, J.-E. Ståhl
Published in: International Journal of Machine Tools and Manufacture, Issue 134, 2018, Page(s) 81-97, ISSN 0890-6955
Publisher: Elsevier BV
DOI: 10.1016/j.ijmachtools.2018.07.002

Investigation of the mechanical properties and cutting performance of cBN-based cutting tools with Cr 3 C 2 binder phase.

Author(s): Kateryna Slipchenko, Igor Petrusha, Vladimir Turkevich, Jakob Johansson, Volodymyr Bushlya, Jan-Eric Ståhl
Published in: Procedia CIRP, Issue 72, 2018, Page(s) 1433-1438, ISSN 2212-8271
Publisher: Elsevier
DOI: 10.1016/j.procir.2018.03.180

CPR a general Cost Performance Ratio in Manufacturing-A KPI for judgement of different technologies and development scenarios

Author(s): Christina Windmark, Volodymyr Bushlya, Jan-Eric Ståhl
Published in: Procedia CIRP, Issue 72, 2018, Page(s) 1220-1226, ISSN 2212-8271
Publisher: Elsevier
DOI: 10.1016/j.procir.2018.03.106

Assessment of Commonly used Tool Life Models in Metal Cutting

Author(s): Daniel Johansson, Sören Hägglund, Volodymyr Bushlya, Jan-Eric Ståhl
Published in: Procedia Manufacturing, Issue 11, 2017, Page(s) 602-609, ISSN 2351-9789
Publisher: Elsevier
DOI: 10.1016/j.promfg.2017.07.154

Influence of graphite nanoadditives to vegetable-based oil on machining performance when MQCL assisted hard turning

Author(s): Oleksandr Gutnichenko, Volodymyr Bushlya, Sverker Bihagen, Jan-Eric Ståhl
Published in: Procedia CIRP, Issue 77, 2018, Page(s) 437-440, ISSN 2212-8271
Publisher: Elsevier
DOI: 10.1016/j.procir.2018.08.281

Features of the Formation of Structure and Phase Composition in the Process of Reactive Sintering of Cubic Boron Nitride with Ti, Cr, V Compounds

Author(s): Slipchenko, K. V., Petrusha, I. A., Turkevich, V. Z., Bushlya, V. M. & Stahl J.-E.
Published in: Metallofiz Noveishie Tekhnol, Issue No40 2018, 2018, Page(s) 1081-1091, ISSN 1024-1809
Publisher: National'na Akademiya Nauk Ukrainy

Influence of tool material and tool wear on tool temperature in hard turning reconstructed via inverse problem solution

Author(s): Kryzhanivskyy, V., Bushlya, V., Gutnichenko, O., M’Saoubi, R., Ståhl, J.-E.
Published in: Journal of Superhard Materials, Issue Volume 39 (3), 2017, Page(s) 192-202, ISSN 1063-4576
Publisher: Springer Verlag

Superhard pcBN materials with chromium compounds as a binder

Author(s): Kolabylina, T., Bushlya, V., Petrusha, I., Johansson, D., Ståhl, J.-E., Turkevich, V.
Published in: Journal of Superhard Materials, Issue Volume 39 (3), 2017, Page(s) 155-165, ISSN 1063-4576
Publisher: Springer Verlag

Sensitivity of Colding tool life equation on the dimensions of experimental dataset

Author(s): D. Johansson, S. Hägglund, V. Bushlya, J.-E. Ståhl
Published in: Journal of Superhard Materials, Issue Volume 39 (4), 2017, Page(s) 67-79, ISSN 1063-4576
Publisher: Springer Verlag

WC-Co-Re cemented carbides: Structure, properties and potential applications

Author(s): I. Konyashin, S. Farag, B. Ries, B. Roebuck
Published in: International Journal of Refractory Metals, Issue Volume 78, 2018, 2018, Page(s) 247-253, ISSN 0263-4368
Publisher: Elsevier BV

Superhard pcBN tool materials with Ti3SiC2 MAX-phase binder: Structure, properties, application

Author(s): Kolabylina, T., Bushlya, V., Petrusha, I., Johansson, D., Ståhl, J.-E., Turkevich, V.
Published in: Journal of Superhard Materials, Issue Volume 39 (3), 2017, Page(s) 155-165, ISSN 1063-4576
Publisher: Springer Verlag

Boron monosulfide: Equation of state and pressure-induced phase transition

Author(s): K. A. Cherednichenko, I. A. Kruglov, A. R. Oganov, Y. Le Godec, M. Mezouar, V. L. Solozhenko
Published in: Journal of Applied Physics, Issue 123/13, 2018, Page(s) 135903, ISSN 0021-8979
Publisher: American Institute of Physics
DOI: 10.1063/1.5025164

Equation of state of boron subarsenide B 12 As2 to 47 GPa

Author(s): Kirill A. Cherednichenko, Yann Le Godec, Vladimir L. Solozhenko
Published in: High Pressure Research, Issue 38/3, 2018, Page(s) 224-231, ISSN 0895-7959
Publisher: Taylor & Francis
DOI: 10.1080/08957959.2018.1476507

Mechanical properties of superhard boron subnitride B13N2

Author(s): V. L. Solozhenko, V. Bushlya
Published in: Journal of Superhard Materials, Issue 39/6, 2017, Page(s) 422-426, ISSN 1063-4576
Publisher: Springer Verlag
DOI: 10.3103/s1063457617060065

On melting of boron subnitride B13N2 under pressure

Author(s): V. L. Solozhenko, V. A. Mukhanov
Published in: Journal of Superhard Materials, Issue 39/2, 2017, Page(s) 147-148, ISSN 1063-4576
Publisher: Springer Verlag
DOI: 10.3103/s1063457617020113

Phase Diagram of the B–BN System at Pressures up to 24 GPa: Experimental Study and Thermodynamic Analysis

Author(s): Vladimir L. Solozhenko, Vladimir Z. Turkevich
Published in: The Journal of Physical Chemistry C, Issue 122/15, 2018, Page(s) 8505-8509, ISSN 1932-7447
Publisher: American Chemical Society
DOI: 10.1021/acs.jpcc.8b00102

Structure and equation of state of tetragonal boron subnitride B 50 N 2

Author(s): Kirill A. Cherednichenko, Vladimir L. Solozhenko
Published in: Journal of Applied Physics, Issue 122/15, 2017, Page(s) 155901, ISSN 0021-8979
Publisher: American Institute of Physics
DOI: 10.1063/1.4996854

Thermal expansion of boron subnitrides

Author(s): Kirill A. Cherednichenko, Lara Gigli, Vladimir L. Solozhenko
Published in: Solid State Communications, Issue 275, 2018, Page(s) 21-24, ISSN 0038-1098
Publisher: Elsevier BV
DOI: 10.1016/j.ssc.2018.03.007

Thermoelastic equation of state of boron subphosphide B12P2

Author(s): V. L. Solozhenko, K. A. Cherednichenko, O. O. Kurakevych
Published in: Journal of Superhard Materials, Issue 39/1, 2017, Page(s) 71-74, ISSN 1063-4576
Publisher: Springer Verlag
DOI: 10.3103/s1063457617010099

Mechanical properties of ultra-hard nanocrystalline cubic boron nitride

Author(s): Vladimir L. Solozhenko, Volodymyr Bushlya, Jinming Zhou
Published in: Journal of Applied Physics, Issue 126/7, 2019, Page(s) 075107, ISSN 0021-8979
Publisher: American Institute of Physics
DOI: 10.1063/1.5109636

The Influence of Sintering Temperature on Phase Composition and Mechanical Properties of $c$BN-Based Composites with Addition of Vanadium Compounds

Author(s): K. V. Slipchenko, I. A. Petrusha, V. Z. Turkevich, D. A. Stratiichuk, V. M. Slipchenko, N. M. Bilyavina, D. V. Turkevich, V. M. Bushlya, J.-E. Stahl
Published in: METALLOFIZIKA I NOVEISHIE TEKHNOLOGII, Issue 41/12, 2019, Page(s) 1599-1610, ISSN 1024-1809
Publisher: National'na Akademiya Nauk Ukrainy
DOI: 10.15407/mfint.41.12.1599

Obtaining superhard composites in the system Cdiam—SiB4—WC under conditions of high pressures and temperatures

Author(s): D.A. Stratiichuk, V.Z. Turkevich, V.M. Bushlya
Published in: Reports of the National Academy of Sciences of Ukraine, Issue 10, 2019, Page(s) 49-56, ISSN 1025-6415
Publisher: Akademperiodyca
DOI: 10.15407/dopovidi2019.10.049

Mechanical Properties of Boron Phosphides

Author(s): V. L. Solozhenko, V. Bushlya
Published in: Journal of Superhard Materials, Issue 41/2, 2019, Page(s) 84-89, ISSN 1063-4576
Publisher: Springer Verlag
DOI: 10.3103/s1063457619020023

Nanotwinning in Boron Subphosphide B12P2

Author(s): B. A. Kulnitskiy, I. A. Perezhogin, V. D. Blank, V. A. Mukhanov, V. L. Solozhenko
Published in: Journal of Superhard Materials, Issue 41/2, 2019, Page(s) 139-141, ISSN 1063-4576
Publisher: Springer Verlag
DOI: 10.3103/s1063457619020102

Thermal expansion of α-boron and some boron-rich pnictides

Author(s): Kirill A. Cherednichenko, Vladimir L. Solozhenko
Published in: Solid State Communications, Issue 303-304, 2019, Page(s) 113735, ISSN 0038-1098
Publisher: Elsevier BV
DOI: 10.1016/j.ssc.2019.113735

Quantitative analysis of chip segmentation in machining using an automated image processing method

Author(s): Andrew Hrechuk, Volodymyr Bushlya, Rachid M’Saoubi, Jan-Eric Ståhl
Published in: Procedia CIRP, Issue 82, 2019, Page(s) 314-319, ISSN 2212-8271
Publisher: Elsevier
DOI: 10.1016/j.procir.2019.03.272

Sintering of binderless cubic boron nitride and its modification by β-Si3N4 additive for hard machining applications

Author(s): V. Bushlya, I. Petrusha, O. Gutnichenko, O. Osipov, R. M'Saoubi, V. Turkevich, J.-E. Ståhl
Published in: International Journal of Refractory Metals and Hard Materials, Issue 86, 2020, Page(s) 105100, ISSN 0263-4368
Publisher: Elsevier BV
DOI: 10.1016/j.ijrmhm.2019.105100

Computational and Experimental Inverse Problem Approach for Determination of Time Dependency of Heat Flux in Metal Cutting

Author(s): V. Kryzhanivskyy, V. Bushlya, O. Gutnichenko, R. M'Saoubi, J. E. Ståhl
Published in: Procedia CIRP, Issue Volume 58, 2017, Page(s) 122-127, ISSN 2212-8271
Publisher: Elsevier

The Influence of VC-Al Additive Content on Structure and Phase Composition of cBN Based Superhard Materials

Author(s): Slipchenko, K., Petrusha, I., Turkevich, V., Johansson, J., Bushlya, V., & Ståhl, J. E.
Published in: Rock destructive and metal cutting tools – technique and technology of their manufacturing and application, Issue Vol.21, 2018, 2018, Page(s) 275-284, ISSN 2223-3938
Publisher: ISM

Thermobaric sintering of cubic boron nitride in the presence of unstable iron and chromium nitrides.

Author(s): I.A. Petrusha, Yu.O. Melniichuk, V.M. Bushlya, N.M. Bilyavyna, O.S. Osipov, D.A. Stratiichuk, T.I. Smirnova, K.V. Slipchenko
Published in: Proceedings of the Conference “Rock Destructive and Metal Machining Tools” in Truskavets, 2016
Publisher: ISM

Deliverables

Publications

Share this page

Download