Skip to main content

Friction stir processing based local damage mitigation and healing in aluminium alloys

Searching for OpenAIRE data...

Publications

Avoiding abnormal grain growth in thick 7XXX aluminium alloy friction stir welds during T6 post heat treatments

Author(s): Matthieu B. Lezaack, Aude Simar
Published in: Materials Science and Engineering: A, Issue 807, 2021, Page(s) 140901, ISSN 0921-5093
DOI: 10.1016/j.msea.2021.140901

Efficient optimization methodology for laser powder bed fusion parameters to manufacture dense and mechanically sound parts validated on AlSi12 alloy

Author(s): Julie Gheysen, Matthieu Marteleur, Camille van der Rest, Aude Simar
Published in: Materials & Design, Issue 199, 2021, Page(s) 109433, ISSN 0264-1275
DOI: 10.1016/j.matdes.2020.109433

Manufacturing high strength aluminum matrix composites by friction stir processing: An innovative approach

Author(s): Nelson Netto, Lv Zhao, Jeroen Soete, Grzegorz Pyka, Aude Simar
Published in: Journal of Materials Processing Technology, Issue 283, 2020, Page(s) 116722, ISSN 0924-0136
DOI: 10.1016/j.jmatprotec.2020.116722

Nanoscale periodic gradients generated by laser powder bed fusion of an AlSi10Mg alloy

Author(s): Williams Lefebvre, Grégory Rose, Pauline Delroisse, Eric Baustert, Fabien Cuvilly, Aude Simar
Published in: Materials & Design, Issue 197, 2021, Page(s) 109264, ISSN 0264-1275
DOI: 10.1016/j.matdes.2020.109264

Influence on microstructure, strength and ductility of build platform temperature during laser powder bed fusion of AlSi10Mg

Author(s): Juan Guillermo Santos Macías, Thierry Douillard, Lv Zhao, Eric Maire, Grzegorz Pyka, Aude Simar
Published in: Acta Materialia, Issue 201, 2020, Page(s) 231-243, ISSN 1359-6454
DOI: 10.1016/j.actamat.2020.10.001

Mean-field model analysis of deformation and damage in friction stir processed Mg-C composites

Author(s): Aude Simar, Anne Mertens, Sophie Ryelandt, Francis Delannay, Laurence Brassart
Published in: Materials Science and Engineering: A, Issue 723, 2018, Page(s) 324-333, ISSN 0921-5093
DOI: 10.1016/j.msea.2018.03.043

On the Prediction of Hot Tearing in Al-to-Steel Welding by Friction Melt Bonding

Author(s): N. Jimenez-Mena, P. J. Jacques, J. M. Drezet, A. Simar
Published in: Metallurgical and Materials Transactions A, Issue 49/7, 2018, Page(s) 2692-2704, ISSN 1073-5623
DOI: 10.1007/s11661-018-4618-z

Compression behavior of lattice structures produced by selective laser melting: X-ray tomography based experimental and finite element approaches

Author(s): Yasin Amani, Sylvain Dancette, Pauline Delroisse, Aude Simar, Eric Maire
Published in: Acta Materialia, Issue 159, 2018, Page(s) 395-407, ISSN 1359-6454
DOI: 10.1016/j.actamat.2018.08.030

Residual stresses of friction melt bonded aluminum/steel joints determined by neutron diffraction

Author(s): N. Jimenez-Mena, T. Sapanathan, J.M. Drezet, T. Pirling, P.J. Jacques, A. Simar
Published in: Journal of Materials Processing Technology, Issue 266, 2019, Page(s) 651-661, ISSN 0924-0136
DOI: 10.1016/j.jmatprotec.2018.11.030

Ductilisation and fatigue life enhancement of selective laser melted AlSi10Mg by friction stir processing

Author(s): Juan Guillermo Santos Macías, Chola Elangeswaran, Lv Zhao, Brecht Van Hooreweder, Jérôme Adrien, Eric Maire, Jean-Yves Buffière, Wolfgang Ludwig, Pascal J. Jacques, Aude Simar
Published in: Scripta Materialia, Issue 170, 2019, Page(s) 124-128, ISSN 1359-6462
DOI: 10.1016/j.scriptamat.2019.05.044

On the interplay between intermetallic controlled growth and hot tearing susceptibility in Al-to-steel welding with additional interlayers

Author(s): N. Jimenez-Mena, A. Simar, P.J. Jacques
Published in: Materials & Design, Issue 180, 2019, Page(s) 107958, ISSN 0264-1275
DOI: 10.1016/j.matdes.2019.107958

Unveiling the impact of the effective particles distribution on strengthening mechanisms: A multiscale characterization of Mg+Y2O3 nanocomposites

Author(s): C. Mallmann, F. Hannard, E. Ferrié, A. Simar, R. Daudin, P. Lhuissier, A. Pacureanu, M. Fivel
Published in: Materials Science and Engineering: A, Issue 764, 2019, Page(s) 138170, ISSN 0921-5093
DOI: 10.1016/j.msea.2019.138170

Ductilization of selective laser melted Ti6Al4V alloy by friction stir processing

Author(s): Chunjie Huang, Xingchen Yan, Lv Zhao, Min Liu, Wenyou Ma, Weibing Wang, Jeroen Soete, Aude Simar
Published in: Materials Science and Engineering: A, Issue 755, 2019, Page(s) 85-96, ISSN 0921-5093
DOI: 10.1016/j.msea.2019.03.133

Enhancement of toughness of Al-to-steel Friction Melt Bonded welds via metallic interlayers

Author(s): Norberto Jimenez-Mena, Pascal J. Jacques, Lipeng Ding, Nicolas Gauquelin, Dominique Schryvers, Hosni Idrissi, Francis Delannay, Aude Simar
Published in: Materials Science and Engineering: A, Issue 740-741, 2019, Page(s) 274-284, ISSN 0921-5093
DOI: 10.1016/J.MSEA.2018.10.101

Fostering crack deviation via local internal stresses in Al/NiTi composites and its correlation with fracture toughness

Author(s): Lv Zhao, Lipeng Ding, Jeroen Soete, Hosni Idrissi, Greet Kerckhofs, Aude Simar
Published in: Composites Part A: Applied Science and Manufacturing, Issue 126, 2019, Page(s) 105617, ISSN 1359-835X
DOI: 10.1016/J.COMPOSITESA.2019.105617

Damage mechanisms in selective laser melted AlSi10Mg under as built and different post-treatment conditions

Author(s): Lv Zhao, Juan Guillermo Santos Macías, Lipeng Ding, Hosni Idrissi, Aude Simar
Published in: Materials Science and Engineering: A, Issue 764, 2019, Page(s) 138210, ISSN 0921-5093
DOI: 10.1016/J.MSEA.2019.138210

Comparison of residual stresses obtained by the crack compliance method for parts produced by different metal additive manufacturing techniques and after friction stir processing

Author(s): Lv Zhao, Juan Guillermo Santos Macías, Adrien Dolimont, Aude Simar, Edouard Rivière-Lorphèvre
Published in: Additive Manufacturing, Issue 36, 2020, Page(s) 101499, ISSN 2214-8604
DOI: 10.1016/j.addma.2020.101499

Friction stir welding/processing of metals and alloys: A comprehensive review on microstructural evolution

Author(s): A. Heidarzadeh, S. Mironov, R. Kaibyshev, G. Çam, A. Simar, A. Gerlich, F. Khodabakhshi, A. Mostafaei, D.P. Field, J.D. Robson, A. Deschamps, P.J. Withers
Published in: Progress in Materials Science, 2020, Page(s) 100752, ISSN 0079-6425
DOI: 10.1016/j.pmatsci.2020.100752

Friction Stir Processing for Architectured Materials

Author(s): Aude Simar, Marie-Noëlle Avettand-Fènoël
Published in: Architectured Materials in Nature and Engineering - Archimats, Issue 282, 2019, Page(s) 195-229
DOI: 10.1007/978-3-030-11942-3_7

Lightening the load of aluminium alloys, vulgarisation paper

Author(s): Aude Simar
Published in: EU Researcher, Issue summer 2020, 2020, Page(s) 59

Extended durability for high strength aluminium alloys, vulgarisation paper

Author(s): Aude Simar, Florent Hannard, Matthieu B. Lezaack, Juan Guillermo Santos Macías, Lv Zhao, Grzegorz Pyka
Published in: Innovation News Network, Issue Issue 4, 2020