Skip to main content

WEB OF INNOVATION AND VALUE CHAINS OF ADDITIVE MANUFACTURING UNDER CONSIDERATION OF RRI

Deliverables

Literature review

report combining the three literature reviews on factors for innovation success in terms of societal and market acceptance at the project, (inter)organizational and business model level.

Simulation results

Collection of all scenarios and assumptions model input data simulation results visualization of the results of all performed computational simulation experiments

Final conceptual model on web of innovation value chain

report summarizing all factors indicators parameters from D23 interviews and foresight activities

Draft on webs of innovation value chains

report presenting an overview of all factors found in the literature reviews and their relationships according to the literature

Report on AM future scenarios and strategies

The developed scenarios based on the future projections of the key factors are outlined regarding chances risks and consequences

Strategic recommendations

Reports on the interpretation of the results of the research of the IAMRRI project documentation on the developed understanding and knowledge base on the role of RRI in webs of IVC in AM considerations on the best position of RRI opening for fostering RRI oriented innovation

Summary of the future conference

The future conference reflects the entire work undertaken throughout the project including the foresight process WP6

Report on the I AM RRI AB model

Documentation on the demonstrator for the available I AM RRI AB mode the report is the documentation on the final version of the IAMRRI ABM results of calibration and other software tests are reportedto give information about the model the assumptions and the robustness of the demonstrator

Project booklet and project videos online

The overall project outcome will be mirrored within a project flyer and a project video

Corporate identity and project public webpage

The corporate identity for the project will be finalised and a public project webpage will be established.

Final future conference

Content of the conference will be demonstration of project work outcomes and results of use cases and best practices model and simulation tool application of simulation strategic guidelines on introduction of RRI involvement of society in RRI aspects in value chains method for involving society and institutional change by implementing RRI principles The location of the conference will be in accordance with the nation heading the council of the European Union which will be Germany

Searching for OpenAIRE data...

Publications

The effects of locations on the build tray on the quality of specimens in powder bed additive manufacturing

Author(s): Snehashis Pal, Nenad Gubeljak, Tonica Bončina, Radovan Hudák, Teodor Toth, Jozef Zivcak, Gorazd Lojen, Niko Leben, Igor Drstvenšek
Published in: The International Journal of Advanced Manufacturing Technology, 112/3-4, 2021, Page(s) 1159-1170, ISSN 0268-3768
Publisher: Springer Verlag
DOI: 10.1007/s00170-020-06563-5

Additive manufacturing in orthodontics

Author(s): A. Fekonja, N. Rošer, I. Drstvenšek
Published in: Materiali in tehnologije, 53/2, 2019, Page(s) 165-169, ISSN 1580-2949
Publisher: Institut za kovinske materiale in tehnologije Ljubljana
DOI: 10.17222/mit.2018.154

Use of additively manufactured patient-specific instruments in clinical praxis

Author(s): I. Drstvenšek, U. Kostevšek, T. Brajlih, N. Ihan Hren, M. Merc, T. Tomažič, S. Stevič, M. Vogrin, A. Moličnik
Published in: Materiali in tehnologije, 53/2, 2019, Page(s) 155-163, ISSN 1580-2949
Publisher: Institut za kovinske materiale in tehnologije Ljubljana
DOI: 10.17222/mit.2018.152

The responsible learning organization : Can Senge (1990) teach organizations how to become responsible innovators?

Author(s): Hansen, Jens Ørding; Jensen, Are; Nguyen, Nhien
Published in: The Learning Organization, Vol. 27 No. 1, 2020, Page(s) 65-74, ISSN 0969-6474
Publisher: Emerald Group Publishing Ltd.
DOI: 10.1108/tlo-11-2019-0164

Effect of surface powder particles and morphologies on corrosion of Ti-6Al-4 V fabricated with different energy densities in selective laser melting

Author(s): Snehashis Pal, Matjaž Finšgar, Tonica Bončina, Gorazd Lojen, Tomaž Brajlih, Igor Drstvenšek
Published in: Materials & Design, 211, 2021, Page(s) 110184, ISSN 0264-1275
Publisher: Elsevier BV
DOI: 10.1016/j.matdes.2021.110184

Interorganiszational Collaboration in Innovation Networks: An Agent Based Model for Responsibility Research and Innovation in Addtitive Manufacturing

Author(s): Cozzoni E., Passavanti C., Ponsiglione C., Primario S., Rippa P.
Published in: sustainability, Volume 13, Issue 13, 2021, ISSN 2071-1050
Publisher: MDPI Open Access Publishing
DOI: 10.3390/su13137460

The effects of locations on the build tray on the quality of specimens in powder bed additive manufacturing

Author(s): Snehashis Pal, Nenad Gubeljak, Tonica Bončina, Radovan Hudák, Teodor Toth, Jozef Zivcak, Gorazd Lojen, Niko Leben, Igor Drstvenšek
Published in: The International Journal of Advanced Manufacturing Technology, 112 / 3-4, 2021, Page(s) 1159-1170, ISSN 0268-3768
Publisher: Springer Verlag
DOI: 10.1007/s00170-020-06563-5

D3.2 Drafts on Web of Innovation Value Chains

Author(s): M.Spring, D. Soetanto, M. Martinsuo, T. Luomaranta. G.van de Kaa, V.C.M Sobota, C. van Beers, M.Hörlesberger, A.Bierwirth, B.Kriszt
Published in: 2019
Publisher: Montanuniversitaet Leoben
DOI: 10.34901/mul.pub.2021.2

Different futures for the European innovation system of additive manufacturing and their implication on society

Author(s): Hörlesberger, M.; Kasztler, A.; Wepner, B.; Kriszt, B.
Published in: SSRN, 2022, ISSN 1556-5068
Publisher: Elsevier
DOI: 10.2139/ssrn.4022263

Test Strategy for Material Qualification of AM Produced Ceramics for Implants and Dental Applications

Author(s): T. Lube, S. Endt, M. Schwentenwein, J. Rabitsch
Published in: 2021
Publisher: Montanuniversitaet Leoben

D.2.2 Definitions and Conceptualisations

Author(s): Geerten van de Kaa, Vladimir C. M. Sobota, Martin Spring, Danny Soetanto, Miia Martinsuo, Toni Luomaranta, Antonia Bierwirth, Brigitte Kriszt, Nhien Nguyen, Izaskun Jimenez Iturriza
Published in: 2019
Publisher: Montanuniversitaet Leoben
DOI: 10.34901/mul.pub.2021.6

D2.1 Literatur Review

Author(s): G. van de Kaa, V.C.M Sobota, R. Ott, C.van Beers, D. Soetanto, M. Spring, M. Martinsou, T. Luomaranta, A. Bierwirth
Published in: 2021
Publisher: TUDelft
DOI: 10.4233/uuid:99ec9156-6ed8-46e6-9263-5d87eff15e99

Stirring R&D strategies using Foresight, the case IAMRRI

Author(s): Hörlesberger, M.
Published in: Innovator Circle Event, 2021
Publisher: Green Energy Lab Austria

Agent-based Modelling for Responsible Research and Innovation in Additive Manufacturing Innovation Value Chains: From SKIN to IAMRRI Model

Author(s): Are Jensen, Evgueni Vinogradov, Nhien Nguyen
Published in: Conference Proceedings of the STS Conference Graz 2021, 2021, ISBN 978-3-85125-855-4
Publisher: Nicki Lisa Cole, Michaela Jahrbacher, Günter Getzinger (Critical Issues in Science, Technology and Society Studies, 3 – 5 May 2021)
DOI: 10.3217/978-3-85125-855-4

Additive manufacturing innovations: Stakeholders’ influence to enhance sustainability and responsibility

Author(s): Luomaranta, T.
Published in: Proceedings of the XXXI ISPIM Innovation Conference, Innovating in Times of Crisis, 2020, Page(s) 1-18, ISBN 978-952-335-466-1
Publisher: LUT Scientific and Expertise Publications

Future Scenarios of Additive Manufacturing in Consideration with Responsible Research and Innovation

Author(s): Hörlesberger, M.; Kasztler, A.; Wepner, B.
Published in: International Association for Management of Technology (IAMOT), annually, 2021, Page(s) 642-651
Publisher: International Association for Management of Technology (IAMOT)
DOI: 10.52202/060557-0049

Stakeholders’ involvement in additive manufacturing innovations

Author(s): Luomaranta, T. & Martinsuo, M.
Published in: Conference: EUROMA European Operations Management, 2019, Page(s) 10
Publisher: European Operations Management Association (EUROMA

Responsible research and innovation openings: concept of RRI institutionalization

Author(s): Luomaranta, T.
Published in: "Conference: XXXII ISPIM Innovation Conference ""Innovating our Common Future"", 20-23 June, 2021", 2021
Publisher: ISPIM The International Society for Professional Innovation Management

Ideas for supply chain innovations: Involving partners in additive manufacturing

Author(s): Luomaranta, T. & Martinsuo, M.
Published in: Proceedings of the EUROMA European Operations Management Association Conference, 28-30 June, 2020, 2020, Page(s) pp. 924-933
Publisher: European Operations Management Association

Responsible research and innovation fostering citizen science in additive manufacturing innovations

Author(s): Luomaranta, T. & Sischarenko, E.
Published in: Citizen Science Conference: Knowledge for Change: A decade of Citizen Science (2020–2030) in support of the Sustainable Development Goals, 14-15 October, 2020, 2020
Publisher: Citizen Science Conference

Responsible Research and Innovation (RRI) Measures in the Additive Manufacturing Webs of Innovation Value Chains

Author(s): Kriszt, B., Iturriza- Jimenez, I., Wepner, B.; Kasztler A., Hörlesberger M
Published in: Book of Abstracts 19th STS Conference Graz 2021 Critical Issues in Science, Technology and Society Studies, 3–5 May 2021, 2021, ISBN 978-3-85125-821-9
Publisher: Verlag der Technischen Universität Graz
DOI: 10.3217/978-3-85125-821-9

The IAMRRI Booklet: Future Talk on Innovation in Additive Manufacturing & Openings for Responsible Research and Innovation

Author(s): B. Kriszt
Published in: 2021
Publisher: Montanuniversitaet Leoben
DOI: 10.34901/mul.pub.2021.4

Sidosryhmien osallistuminen teollisen 3D-tulostuksen innovaatiotoimintaan (Involvement of stakeholders in the innovation value chains of industrial additive manufacturing)

Author(s): Luomaranta, T. & Martinsuo, M.
Published in: Stoori (Production Management Society of Finland newsletter), 3, 2019, Page(s) 39-43, ISSN 2342-4095
Publisher: Production Management Society of Finland

Liiketoiminnan uudistaminen 3D-tulostuksen innovaatioarvoverkostoissa (Renewal of business in the innovation value chains for 3D printing)

Author(s): Martinsuo, M. & Luomaranta, T.
Published in: Promaint, 4, 2018, Page(s) 25-27, ISSN 1797-2000
Publisher: Finnish Maintenance Society, Promaint

3D-tulostus: systeeminen innovaatio arvoverkostossa (3D printing: a systemic innovation in a value network)

Author(s): Martinsuo, M.
Published in: Stoori (Production Management Society of Finland Newsletter), 4, 2018, Page(s) 44-47, ISSN 2342-4095
Publisher: Production Management Society of Finland

Charakterisierung einer additiv gefertigten Zirkonoxidkeramik für Dentalanwendungen und Implantate (Characterization of an additively manufactured zirconia ceramic for dental and implant applications)

Author(s): Endt, Sebastian Zacharias
Published in: 2021
Publisher: Montanuniversität Leoben