WEB OF INNOVATION AND VALUE CHAINS OF ADDITIVE MANUFACTURING UNDER CONSIDERATION OF RRI

Projektinformationen

I AM RRI

ID Finanzhilfevereinbarung: 788361

DOI

10.3030/788361

Projekt abgeschlossen

EK-Unterschriftsdatum 13 April 2018

Startdatum 1 Mai 2018

Enddatum 31 Oktober 2021

Finanziert unter

• Develop the governance for the advancement of responsible research and innovation by all stakeholders, which is sensitive to society needs and demands and promote an ethics framework for research and innovation

Gesamtkosten

€ 2 995 565,00

EU-Beitrag

€ 2 995 565,00

Koordiniert durch

MONTANUNIVERSITAET LEOBEN
Austria

CORDIS bietet Links zu öffentlichen Ergebnissen und Veröffentlichungen von HORIZONT-Projekten.

Links zu Ergebnissen und Veröffentlichungen von RP7-Projekten sowie Links zu einigen Typen spezifischer Ergebnisse wie Datensätzen und Software werden dynamisch von OpenAIRE abgerufen.

Leistungen

Documents, reports (7)

Literature review

report combining the three literature reviews on factors for innovation success in terms of societal and market acceptance at the project, (inter)organizational and business model level.

Simulation results

Collection of all scenarios and assumptions model input data simulation results visualization of the results of all performed computational simulation experiments

Final conceptual model on web of innovation value chain

report summarizing all factors indicators parameters from D23 interviews and foresight activities

Draft on webs of innovation value chains

report presenting an overview of all factors found in the literature reviews and their relationships according to the literature

Report on AM future scenarios and strategies

The developed scenarios based on the future projections of the key factors are outlined regarding chances risks and consequences

Strategic recommendations

Reports on the interpretation of the results of the research of the IAMRRI project documentation on the developed understanding and knowledge base on the role of RRI in webs of IVC in AM considerations on the best position of RRI opening for fostering RRI oriented innovation

Summary of the future conference

The future conference reflects the entire work undertaken throughout the project including the foresight process WP6

Demonstrators, pilots, prototypes (1)

Report on the I AM RRI AB model

Documentation on the demonstrator for the available I AM RRI AB mode the report is the documentation on the final version of the IAMRRI ABM results of calibration and other software tests are reportedto give information about the model the assumptions and the robustness of the demonstrator

Websites, patent fillings, videos etc. (2)

Project booklet and project videos online

The overall project outcome will be mirrored within a project flyer and a project video

Corporate identity and project public webpage

The corporate identity for the project will be finalised and a public project webpage will be established.

Other (1)

Final future conference

Content of the conference will be demonstration of project work outcomes and results of use cases and best practices model and simulation tool application of simulation strategic guidelines on introduction of RRI involvement of society in RRI aspects in value chains method for involving society and institutional change by implementing RRI principles The location of the conference will be in accordance with the nation heading the council of the European Union which will be Germany

Veröffentlichungen

Other (5)

D3.2 Drafts on Web of Innovation Value Chains

Autoren: M.Spring, D. Soetanto, M. Martinsuo, T. Luomaranta. G.van de Kaa, V.C.M Sobota, C. van Beers, M.Hörlesberger, A.Bierwirth, B.Kriszt
Veröffentlicht in: 2019
Herausgeber: Montanuniversitaet Leoben
DOI: 10.34901/mul.pub.2021.2

Different futures for the European innovation system of additive manufacturing and their implication on society

Autoren: Hörlesberger, M.; Kasztler, A.; Wepner, B.; Kriszt, B.
Veröffentlicht in: SSRN, 2022, ISSN 1556-5068
Herausgeber: Elsevier
DOI: 10.2139/ssrn.4022263

Test Strategy for Material Qualification of AM Produced Ceramics for Implants and Dental Applications

Autoren: T. Lube, S. Endt, M. Schwentenwein, J. Rabitsch
Veröffentlicht in: 2021
Herausgeber: Montanuniversitaet Leoben

D.2.2 Definitions and Conceptualisations

Autoren: Geerten van de Kaa, Vladimir C. M. Sobota, Martin Spring, Danny Soetanto, Miia Martinsuo, Toni Luomaranta, Antonia Bierwirth, Brigitte Kriszt, Nhien Nguyen, Izaskun Jimenez Iturriza
Veröffentlicht in: 2019
Herausgeber: Montanuniversitaet Leoben
DOI: 10.34901/mul.pub.2021.6

D2.1 Literatur Review

Autoren: G. van de Kaa, V.C.M Sobota, R. Ott, C.van Beers, D. Soetanto, M. Spring, M. Martinsou, T. Luomaranta, A. Bierwirth
Veröffentlicht in: 2021
Herausgeber: TUDelft
DOI: 10.4233/uuid:99ec9156-6ed8-46e6-9263-5d87eff15e99

Conference proceedings (8)

Agent-based Modelling for Responsible Research and Innovation in Additive Manufacturing Innovation Value Chains: From SKIN to IAMRRI Model

Autoren: Are Jensen, Evgueni Vinogradov, Nhien Nguyen
Veröffentlicht in: Conference Proceedings of the STS Conference Graz 2021, 2021, ISBN 978-3-85125-855-4
Herausgeber: Nicki Lisa Cole, Michaela Jahrbacher, Günter Getzinger (Critical Issues in Science, Technology and Society Studies, 3 – 5 May 2021)
DOI: 10.3217/978-3-85125-855-4

Additive manufacturing innovations: Stakeholders’ influence to enhance sustainability and responsibility

Autoren: Luomaranta, T.
Veröffentlicht in: Proceedings of the XXXI ISPIM Innovation Conference, Innovating in Times of Crisis, 2020, Seite(n) 1-18, ISBN 978-952-335-466-1
Herausgeber: LUT Scientific and Expertise Publications

Future Scenarios of Additive Manufacturing in Consideration with Responsible Research and Innovation

Autoren: Hörlesberger, M.; Kasztler, A.; Wepner, B.
Veröffentlicht in: International Association for Management of Technology (IAMOT), Ausgabe annually, 2021, Seite(n) 642-651
Herausgeber: International Association for Management of Technology (IAMOT)
DOI: 10.52202/060557-0049

Stakeholders’ involvement in additive manufacturing innovations

Autoren: Luomaranta, T. & Martinsuo, M.
Veröffentlicht in: Conference: EUROMA European Operations Management, 2019, Seite(n) 10
Herausgeber: European Operations Management Association (EUROMA

Responsible research and innovation openings: concept of RRI institutionalization

Autoren: Luomaranta, T.
Veröffentlicht in: "Conference: XXXII ISPIM Innovation Conference ""Innovating our Common Future"", 20-23 June, 2021", 2021
Herausgeber: ISPIM The International Society for Professional Innovation Management

Ideas for supply chain innovations: Involving partners in additive manufacturing

Autoren: Luomaranta, T. & Martinsuo, M.
Veröffentlicht in: Proceedings of the EUROMA European Operations Management Association Conference, 28-30 June, 2020, 2020, Seite(n) pp. 924-933
Herausgeber: European Operations Management Association

Responsible research and innovation fostering citizen science in additive manufacturing innovations

Autoren: Luomaranta, T. & Sischarenko, E.
Veröffentlicht in: Citizen Science Conference: Knowledge for Change: A decade of Citizen Science (2020–2030) in support of the Sustainable Development Goals, 14-15 October, 2020, 2020
Herausgeber: Citizen Science Conference

Responsible Research and Innovation (RRI) Measures in the Additive Manufacturing Webs of Innovation Value Chains

Autoren: Kriszt, B., Iturriza- Jimenez, I., Wepner, B.; Kasztler A., Hörlesberger M
Veröffentlicht in: Book of Abstracts 19th STS Conference Graz 2021 Critical Ausgabes in Science, Technology and Society Studies, 3–5 May 2021, 2021, ISBN 978-3-85125-821-9
Herausgeber: Verlag der Technischen Universität Graz
DOI: 10.3217/978-3-85125-821-9

Peer reviewed articles (6)

Context dependent trade-offs around platform-to-platform openness: The case of the Internet of things

Autoren: Mosterd, L., Sobota, V.M., Van de Kaa, G., Ding, A., De Reuver. M.
Veröffentlicht in: Technovation, 2021, ISSN 0166-4972
Herausgeber: Pergamon Press Ltd.

Factors for metal additive manufacturing technology selection, Journal of Manufacturing Technology Management

Autoren: Sobota, V.C.M., van de Kaa, G., Luomaranta, T., Martinsuo, M. Ortt, J.R.,
Veröffentlicht in: Journal of Manufacturing Technology Management, 2020, ISSN 1741-038X
Herausgeber: Emerald Group Publishing Ltd.

The responsible learning organization : Can Senge (1990) teach organizations how to become responsible innovators?

Autoren: Hansen, Jens Ørding; Jensen, Are; Nguyen, Nhien
Veröffentlicht in: The Learning Organization, Ausgabe Vol. 27 No. 1, 2020, Seite(n) 65-74, ISSN 0969-6474
Herausgeber: Emerald Group Publishing Ltd.
DOI: 10.1108/tlo-11-2019-0164

Effect of surface powder particles and morphologies on corrosion of Ti-6Al-4 V fabricated with different energy densities in selective laser melting

Autoren: Snehashis Pal, Matjaž Finšgar, Tonica Bončina, Gorazd Lojen, Tomaž Brajlih, Igor Drstvenšek
Veröffentlicht in: Materials & Design, Ausgabe 211, 2021, Seite(n) 110184, ISSN 0264-1275
Herausgeber: Elsevier BV
DOI: 10.1016/j.matdes.2021.110184

Interorganiszational Collaboration in Innovation Networks: An Agent Based Model for Responsibility Research and Innovation in Addtitive Manufacturing

Autoren: Cozzoni E., Passavanti C., Ponsiglione C., Primario S., Rippa P.
Veröffentlicht in: sustainability, Ausgabe Volume 13, Ausgabe 13, 2021, ISSN 2071-1050
Herausgeber: MDPI Open Access Publishing
DOI: 10.3390/su13137460

The effects of locations on the build tray on the quality of specimens in powder bed additive manufacturing

Autoren: Snehashis Pal, Nenad Gubeljak, Tonica Bončina, Radovan Hudák, Teodor Toth, Jozef Zivcak, Gorazd Lojen, Niko Leben, Igor Drstvenšek
Veröffentlicht in: The International Journal of Advanced Manufacturing Technology, Ausgabe 112 / 3-4, 2021, Seite(n) 1159-1170, ISSN 0268-3768
Herausgeber: Springer Verlag
DOI: 10.1007/s00170-020-06563-5

Monographic books (1)

The IAMRRI Booklet: Future Talk on Innovation in Additive Manufacturing & Openings for Responsible Research and Innovation

Autoren: B. Kriszt
Veröffentlicht in: 2021
Herausgeber: Montanuniversitaet Leoben
DOI: 10.34901/mul.pub.2021.4

Non-peer reviewed articles (3)

Sidosryhmien osallistuminen teollisen 3D-tulostuksen innovaatiotoimintaan (Involvement of stakeholders in the innovation value chains of industrial additive manufacturing)

Autoren: Luomaranta, T. & Martinsuo, M.
Veröffentlicht in: Stoori (Production Management Society of Finland newsletter), Ausgabe 3, 2019, Seite(n) 39-43, ISSN 2342-4095
Herausgeber: Production Management Society of Finland

Liiketoiminnan uudistaminen 3D-tulostuksen innovaatioarvoverkostoissa (Renewal of business in the innovation value chains for 3D printing)

Autoren: Martinsuo, M. & Luomaranta, T.
Veröffentlicht in: Promaint, Ausgabe 4, 2018, Seite(n) 25-27, ISSN 1797-2000
Herausgeber: Finnish Maintenance Society, Promaint

3D-tulostus: systeeminen innovaatio arvoverkostossa (3D printing: a systemic innovation in a value network)

Autoren: Martinsuo, M.
Veröffentlicht in: Stoori (Production Management Society of Finland Newsletter), Ausgabe 4, 2018, Seite(n) 44-47, ISSN 2342-4095
Herausgeber: Production Management Society of Finland

Thesis and dissertations (1)

Charakterisierung einer additiv gefertigten Zirkonoxidkeramik für Dentalanwendungen und Implantate (Characterization of an additively manufactured zirconia ceramic for dental and implant applications)

Autoren: Endt, Sebastian Zacharias
Veröffentlicht in: 2021
Herausgeber: Montanuniversität Leoben