Skip to main content
Go to the home page of the European Commission (opens in new window)
English en
CORDIS - EU research results
CORDIS

Evaluation of thermohydraulic characteristic of printed circuit heat exchangers in pseudocritical region for supercritical CO2 cycle

Project description

Paving the way for greener power cycles

The power sector accounts for approximately 28.2 % of the total greenhouse gas emissions in the EU-27 and the United Kingdom. This has heightened the importance and necessity of researching renewable solutions for the power and energy sectors, leading to the development of the novel supercritical carbon dioxide Brayton cycle (sCO2-BC) as a promising, greener alternative to modern power cycles. However, it faces challenges related to the need for better precoolers, which have pushed its requirements to unacceptable levels. The MSCA-funded Super-CO2 project aims to address this issue by exploring innovative channel geometries. The project seeks to develop and validate various techniques to enhance the existing precooling technology. Additionally, the project will contribute to the integration of sCO2-BC as part of its efforts.

Objective

Currently, 28.2% of the total EU-28 greenhouse gas emissions come from the power sector, a large contributor to greenhouse gas emissions. Consequently, the emphasis of the research in power generation has swung towards assessing highly efficient and greener power cycles. In this reference, the novel supercritical carbon dioxide Brayton cycle (sCO2-BC) is an ideal choice that outstrips other formally well-known power cycles (Brayton & Rankine cycles). In sCO2-BC, the role of the pre-cooler is critical. It serves as a sink to the power cycle and regulates the conditions at the compressor's inlet. The compressor's inlet temperature is intended to be maintained close to the critical temperature of carbon dioxide (CO2) to achieve greater cycle efficiencies. However, exceptionally higher values of the specific heat capacity of CO2 near its critical point (up to 40 times higher than water) require exceedingly high water flow rates on the cold side to achieve the desired exit temperatures of CO2. Consequently, the pre-cooler's pumping power requirements become high enough to deteriorate the cycle's performance. This problem can only be mitigated by exploring new channel geometries with enhanced thermohydraulic characteristics. Therefore, the proposed study plan to characterize the complex thermohydraulic characteristics in the pseudocritical region of CO2 using a multifaceted technique that includes, experimental, numerical, and machine learning techniques. The proposed work will provide a step forward to the success of sCO2-BC technologies that, in turn, will facilitate its integration with the green energy resources (generation-IV nuclear reactors and solar concentrated plants), helping to meet the EU's 2030 climate and energy framework goals of achieving at least 32% share for renewable energy.

Fields of science (EuroSciVoc)

Keywords

Programme(s)

Topic(s)

Funding Scheme

HORIZON-TMA-MSCA-PF-EF - HORIZON TMA MSCA Postdoctoral Fellowships - European Fellowships

See all projects funded under this funding scheme

Call for proposal

(opens in new window) HORIZON-MSCA-2022-PF-01

See all projects funded under this call

Coordinator

NORGES MILJO-OG BIOVITENSKAPELIGE UNIVERSITET
Net EU contribution
€ 226 751,04
Total cost
No data