Skip to main content
Go to the home page of the European Commission (opens in new window)
English en
CORDIS - EU research results
CORDIS
Content archived on 2024-04-30

Atomic surface structure of ternary iii v compounds grown by movpe

Objective



Research objectives and content In this project is planned to cap MOVPE grown samples with the appropriate group V elements with UV radiation from an excimer laser. The surface before capping and the capping procedure will be monitored by RAS. The samples will be tranferred then to an UHV chamber where the deccaping process is initiated under the control of LEED, AES, RAS, Raman scattering and other UHV techniques like Thermal Desorption Spectroscopy. the final surface will be controlled by Auger in order to check its contamination. The innovative aspect of this project lies in the fact that for the first time capped MOVPE grown samples will become available for surface analysis with standard UHV techniques as well as novel optical probes. Training content (objective, benefit and expected impact) Training in specific techniques available only in Berlin Links with industry / industrial relevance(22) A close cooperation existing with AXTRON (Aachen) who are one of the largest producers of MOVPE equipments

Fields of science (EuroSciVoc)

Programme(s)

Topic(s)

Call for proposal

Data not available

Funding Scheme

Data not available

Coordinator

Aristotle University of Thessaloniki
EU contribution
No data
Address
Analytical Chemistry Lab
54006 Thessaloniki
Greece
Total cost
No data