Skip to main content
DeutschDE
European Commission logo print header
Inhalt archiviert am 2022-11-21

Improvement of cold rolled products by computer assisted metallurgical modeling

Ziel

For cold rolled steel grades (uncoated, electrolitically coated or hot dip galvanised) an increasing demand exists, concerning the mechanical properties, the uniformity along the strip length, the reduction of variation from coil to coil as well as the improvement of the yield rate. A very promising approach to reach these additional improvements is a metallurgical-based modelling using, simultaneously, experimental simulation trials and plant results. The aim of the project is therefore a metallurgical-based approach to follow a prediction of the microstructure and mechanical properties as a function of the chemical composition and processing parameters for Aluminium killed LC or ELC and IF based thin sheet grades. Concerning the annealing treatment the modelling will be carried out for batch annealing, continuous annealing and hot dip galvanising.

Programm/Programme

Thema/Themen

Aufforderung zur Vorschlagseinreichung

Data not available

Finanzierungsplan

CSC - Cost-sharing contracts

Koordinator

VOESTALPINE STAHL GMBH
EU-Beitrag
Keine Daten
Adresse
VOEST-ALPINE-Strasse 3
4020 LINZ
Österreich

Auf der Karte ansehen
Links
Gesamtkosten
Keine Daten

Beteiligte (4)

Diese Seite teilen

Herunterladen

Letzte Aktualisierung: 13 Dezember 2002

Mein Booklet

Permalink: https://cordis.europa.eu/project/id/7210-PR-163/de

European Union, 2024