Objetivo The aim of this pilot project is to test a new concept of continuous casting machine in which the upper side of the mould is extended by a refractory tube connected directly to the lower part of the tundish in order to locate the steel meniscus, variations of which are the root cause of most slab surface defects, in the refractory tube instead of in the copper mould. Lubricant will be injected through the copper plate of the mould wall and oscillations replaced by low amplitude, high frequency vibrations applied to the refractory tube. Programa(s) ECSC-STEELDEM 3C - Medium-term guidelines (ECSC) for the programmes of technical steel research and of steel pilot/demonstration projects, 1991-1995 Tema(s) T2 - Continuous casting Convocatoria de propuestas Data not available Régimen de financiación CSC - Cost-sharing contracts Coordinador CENTRE DE RECHERCHES METALLURGIQUES Aportación de la UE Sin datos Dirección Rue Ernest Solvay, 11 4000 LIEGE Bélgica Ver en el mapa Coste total Sin datos Participantes (1) Ordenar alfabéticamente Ordenar por aportación de la UE Ampliar todo Contraer todo INSTITUT DE RECHERCHES DE LA SIDERURGIE FRANÇAISE Francia Aportación de la UE Sin datos Dirección 34, rue de la Croix de Fer 78105 PARIS LA DEFENSE Ver en el mapa Coste total Sin datos
