Development of a fully closed continuous casting machine for the high speed casting of prime quality steels

Informazioni relative al progetto

ID dell’accordo di sovvenzione: 7215-CA-202

Progetto chiuso

Data di avvio 1 Luglio 1992

Data di completamento 30 Giugno 1995

Finanziato da

• Medium-term guidelines (ECSC) for the programmes of technical steel research and of steel pilot/demonstration projects, 1991-1995

Costo totale € 2 831 000,00

Contributo UE € 1 251 750,00

Coordinato da

CENTRE DE RECHERCHES METALLURGIQUES
Belgium

Obiettivo

The aim of this pilot project is to test a new concept of continuous casting machine in which the upper side of the mould is extended by a refractory tube connected directly to the lower part of the tundish in order to locate the steel meniscus, variations of which are the root cause of most slab surface defects, in the refractory tube instead of in the copper mould. Lubricant will be injected through the copper plate of the mould wall and oscillations replaced by low amplitude, high frequency vibrations applied to the refractory tube.

Programma(i)

• ECSC-STEELDEM 3C - Medium-term guidelines (ECSC) for the programmes of technical steel research and of steel pilot/demonstration projects, 1991-1995

Argomento(i)

• T2 - Continuous casting

Invito a presentare proposte

Data not available

Meccanismo di finanziamento

CSC - Cost-sharing contracts

Coordinatore

CENTRE DE RECHERCHES METALLURGIQUES

• Contributo UE: Nessun dato
• Indirizzo: Rue Ernest Solvay, 11 ; 4000 LIEGE ; Belgio
• Costo totale: Nessun dato

Partecipanti (1)

INSTITUT DE RECHERCHES DE LA SIDERURGIE FRANÇAISE

Francia

• Contributo UE: Nessun dato
• Indirizzo: 34, rue de la Croix de Fer ; 78105 PARIS LA DEFENSE
• Costo totale: Nessun dato