Development of a fully closed continuous casting machine for the high speed casting of prime quality steels

Projektinformationen

ID Finanzhilfevereinbarung: 7215-CA-202

Projekt abgeschlossen

Startdatum 1 Juli 1992

Enddatum 30 Juni 1995

Finanziert unter

• Medium-term guidelines (ECSC) for the programmes of technical steel research and of steel pilot/demonstration projects, 1991-1995

Gesamtkosten € 2 831 000,00

EU-Beitrag € 1 251 750,00

Koordiniert durch

CENTRE DE RECHERCHES METALLURGIQUES
Belgium

Ziel

The aim of this pilot project is to test a new concept of continuous casting machine in which the upper side of the mould is extended by a refractory tube connected directly to the lower part of the tundish in order to locate the steel meniscus, variations of which are the root cause of most slab surface defects, in the refractory tube instead of in the copper mould. Lubricant will be injected through the copper plate of the mould wall and oscillations replaced by low amplitude, high frequency vibrations applied to the refractory tube.

Programm/Programme

• ECSC-STEELDEM 3C - Medium-term guidelines (ECSC) for the programmes of technical steel research and of steel pilot/demonstration projects, 1991-1995

Thema/Themen

• T2 - Continuous casting

Aufforderung zur Vorschlagseinreichung

Data not available

Finanzierungsplan

CSC - Cost-sharing contracts

Koordinator

CENTRE DE RECHERCHES METALLURGIQUES

• EU-Beitrag: Keine Daten
• Adresse: Rue Ernest Solvay, 11 ; 4000 LIEGE ; Belgien
• Gesamtkosten: Keine Daten

Beteiligte (1)

INSTITUT DE RECHERCHES DE LA SIDERURGIE FRANÇAISE

Frankreich

• EU-Beitrag: Keine Daten
• Adresse: 34, rue de la Croix de Fer ; 78105 PARIS LA DEFENSE
• Gesamtkosten: Keine Daten