Skip to main content
EnglishEN
European Commission logo print header

GHz nanoscale electrical and dielectric measurements of the solid-electrolyte interface and applications in the battery manufacturing line

Project description

DEENESFRITPL

Improving the performance and safety of lithium–ion battery cells

The growing global energy demands have been driving innovation in energy storage methods, a promising one being lithium–ion batteries. In battery production, the electrolyte decomposes on the electrode to form the solid electrolyte interphase (SEI). This layer, which is about 50 nanometres thick, is fragile and determines to a large extent the state of health and the life cycle of the cell. The EU-funded NanoBat project is developing a toolbox that contains ultrafast high-frequency methods that can test and quantify electrical processes at the SEI, several orders of magnitude better than currently available techniques. The new techniques will improve cell production and testing, creating multiple benefits for manufacturers and customers. These include reduced waste and energy consumption as well as longer-lasting batteries that demonstrate improved thermal runaway.

Objective

Sustainable storage of electrical energy is one of this century’s main challenges, and battery production is one of the future key industries with an estimated market potential of 250 Billion Euros by 2025 as stated by the European Commission. We contribute to this by establishing an RF-nanotechnology toolbox for Li-ion batteries and beyond Lithium batteries. The specific focus is on the nanoscale structure of the 10-50 nm thick SEI (solid electrolyte interphase) layer, which is of pivotal importance for battery performance and safety, but which is difficult to characterize and optimize with currently available techniques. The toolbox contains new nanoscale high-frequency GHz methods that are ultra-fast and capable of testing and quantifying the relevant electrical processes at the SEI, several orders of magnitude better than currently available techniques. Nanoscale imaging of the SEI electrical conductivity at high GHz frequencies will be done for the first time, and impedance changes are measured during electrochemical processes, supported by advanced modelling and simulation techniques. Several methods are tested in pilot-lines, including advanced electrochemical impedance spectroscopy and a newly developed self-discharge method that shortens the electrical formation process in battery production from 2 weeks to 10 min. Finally, the new methods will be used for high-throughput incoming quality control in the battery module production at our automotive end users, where 30.000 cells will be tested per day. In summary, we develop a solid basis of GHz-nanotech instrumentation to improve cell production and testing, resulting in major advantages for manufacturers and customers, for instance reduced waste and energy consumption, and longer lasting batteries that are safer with 90% improved thermal runaway. Project results will be disseminated to a large stakeholder group, with technical workshops (e.g. e-car rally) and conferences in nanotech and battery production.

Fields of science

Keywords

Programme(s)

Topic(s)

Call for proposal

H2020-NMBP-TO-IND-2018-2020

See other projects for this call

Sub call

H2020-NMBP-TO-IND-2019

Funding Scheme

RIA - Research and Innovation action

Coordinator

KEYSIGHT TECHNOLOGIES GMBH
Net EU contribution
€ 762 500,00
Address
GRUBERSTRASSE 40
4020 LINZ
Austria

See on map
Region
Westösterreich Oberösterreich Linz-Wels
Activity type
Private for-profit entities (excluding Higher or Secondary Education Establishments)
Links
Total cost
€ 762 500,00

Participants (12)

Share this page

Download

Last update: 25 March 2024

My Booklet

Permalink: https://cordis.europa.eu/project/id/861962

European Union, 2024