Skip to main content
Go to the home page of the European Commission (opens in new window)
English en
CORDIS - EU research results
CORDIS
INSULATION SOLUTION BASED ON AEROGELS

Article Category

Article available in the following languages:

Aerogel materials enable space applications

New aerogel materials could help protect critical space components while also providing Europe with an important competitive advantage in the new space race.

The new space race is more than just rockets, satellites and services. It’s also about developing new material solutions that make these space applications possible. One of those materials is aerogel. This extremely lightweight and nanoporous material has porosities of up to 99.98 %, resulting in very low bulk densities, thermal conductivities and acoustic velocities. “Offering extreme thermal insulation, hypervelocity particle capture and cryogenic propellant storage, aerogels minimise heat conduction and convection to provide important protection to vital spacecraft components,” explains Barbara Milow, head of the Department Aerogels and Highly Porous Materials at the German Aerospace Center(opens in new window) (DLR). While Europe excels in satellite infrastructure such as Galileo(opens in new window) and Copernicus(opens in new window), it still lacks the ability to leverage the high potential of aerogels for space applications. That’s because it relies on non-European suppliers and technologies for some of the advanced aerogel-based insulation solutions that are required for future space applications. This not only makes Europe dependent on third-party countries, it jeopardises the Continent’s position as a global leader in innovative space solutions and services. Helping to address this shortcoming is the EU-funded ISBA(opens in new window) project. “Bringing together Europe’s leading research groups, we set out to develop aerogel-based thermal insulation solutions for a range of space applications, from satellites to launchers and re-entry vehicles,” adds Milow, who coordinates the project.

Different aerogels for different space applications

To start, the project collaborated with leading European space companies, including Thales Alenia Space(opens in new window) and ArianeGroup(opens in new window), to identify those applications most likely to benefit from aerogels. Based on these defined use cases, the aerogel developers were tasked with developing inorganic and hybrid aerogels, as well as carbon xerogels and polyimide aerogels, for cryogenic, moderate and high temperate space applications. “We started with four use cases and 10 different materials, the development of which included the use of both additive manufacturing and coating technologies,” says Milow. To keep the aerogels intact, enveloping technologies were also developed and tested.

Tested under space-like conditions

Following careful testing, it was determined that not all the proposed materials met the critical requirements of the use cases. As a result, only five materials were selected for further development. These five aerogels eventually underwent intense testing under space-like conditions – a process that further narrowed the field of potential materials. “Following prototype testing and manufacturing as an insulating system, and with the cooperation of Hutchinson S.A.(opens in new window), three of our materials – carbon-based, mechanically soft and stiff silica-based aerogels – reached a technology readiness level (TRL) 7, which was the goal of the project,” notes Milow. TRL 7 means a system prototype or integrated pilot system has been successfully demonstrated in an operational or real-world environment.

A competitive edge in the new space race

Thanks to the close collaboration of partners from different backgrounds, ISBA not only successfully scaled several aerogel-based system solutions, these solutions offer improved handling compared to non-European benchmark systems. In doing so, the project has helped give Europe an important competitive edge in the new global space race. “We’ve proved that it is possible to achieve independence from non-European markets for insulation materials, particularly aerogels,” concludes Milow. The project’s partners(opens in new window) are now working to further scale the material solutions towards production and commercialisation.

Discover other articles in the same domain of application