leading the TRansion of the European Automotive SUpply chain towards a circulaR futurE

Información del proyecto

TREASURE

Identificador del acuerdo de subvención: 101003587

DOI

10.3030/101003587

Proyecto cerrado

Fecha de la firma de la CE 7 Mayo 2021

Fecha de inicio 1 Junio 2021

Fecha de finalización 31 Mayo 2024

Financiado con arreglo a

• SOCIETAL CHALLENGES - Climate action, Environment, Resource Efficiency and Raw Materials

Coste total

€ 3 998 714,63

Aportación de la UE

€ 3 998 714,63

Coordinado por

POLITECNICO DI MILANO
Italy

CORDIS proporciona enlaces a los documentos públicos y las publicaciones de los proyectos de los programas marco HORIZONTE.

Los enlaces a los documentos y las publicaciones de los proyectos del Séptimo Programa Marco, así como los enlaces a algunos tipos de resultados específicos, como conjuntos de datos y «software», se obtienen dinámicamente de OpenAIRE .

Resultado final

Documents, reports (33)

Participatory social impact assessment report

Report on participatory social impact assessment (T2.3)

Follow-up activities report

A report on the follow-up activities established by the TREASURE consortium

Standardization toolkit

Definition of the standardization toolkit (T8.4)

Exploitation plan (1st version)

Exploitation plan (1st version) (T8.1)

Report on disassemblability analysis

Report on disassemblability analysis T32

Industrial use cases and scenarios design (2nd version)

Design of industrial use cases and scenarios 2nd version T13

TREASURE reference framework

Definition of the TREASURE reference framework T11

Exploitation plan (final version) and agreement

Exploitation plan (final version) and agreement (T8.2)

Review of networking with other projects and roadmap

Review of networking with other projects and roadmap (T7.3)

TREASURE technical architecture (1st version)

Definition of the TREASURE technical architecture 1st version T41

Report on recyclability analysis

Report on recyclability analysis T33

Report on ethnography of CE in the automotive industry (final version)

Report on ethnography of CE in the automotive industry (final version) (T4.3)

TREASURE tool & platform requirements and specifications

Definition of the TREASURE tool platform requirements and specifications T12

Report on in-mold/structural electronics prototyping

Report on in-mold/structural electronics prototyping (T6.3)

Report on semi-automated disassembly

Report on semi-automated disassembly (T6.1)

Validation, verification, best practices and lessons learned (final version)

Validation, verification, best practices and lessons learned (final version) (T4.6)

Report on bio-hydrometallurgical materials recovery

Report on bio-hydrometallurgical materials recovery (T6.2)

Dissemination plan (2nd version)

Dissemination plan 2nd version T72

Report on KPIs to be embedded in the TREASURE platform

Report on KPIs to be embedded in the TREASURE platform T34

Strategic standardization roadmap

Definition of the strategic standardization roadmap (T8.4)

Advisory Board report

A report about different inputs from the Advisory Baord

Report on ethnography of CE in the automotive industry (1st version)

Report on ethnography of CE in the automotive industry 1st version T43

TREASURE methodology definition

Definition of the TREASURE methodology T21

Report on business model identification

Report on business model identification (T8.5)

Report on dissemination activities

Report on dissemination activities (T7.2)

Industrial use cases and scenarios design (1st version)

Design of industrial use cases and scenarios 1st version T13

Dissemination plan (1st version)

Dissemination plan 1st version T71

Report on clustering activities

Report on clustering activities (T7.3)

Sustainability advisory methodology definition

Definition of the sustainability advisory methodology T22

Validation, verification, best practices and lessons learned (1st version)

Validation verification best practices and lessons learned 1st version T46

Report on criticality analysis of selected vehicles

Report on criticality analysis of selected vehicles T31

TREASURE technical architecture (final version)

Definition of the TREASURE technical architecture (final version) (T4.1)

Materials recycling/recovery report

Materials recycling/recovery report (T5.3)

Demonstrators, pilots, prototypes (3)

In-mold/structural electronics pilot reconfiguration, testing & optimization

In-mold/structural electronics pilot reconfiguration, testing & optimization (T5.6)

Materials recovery pilot plant reconfiguration, testing & optimization

Materials recovery pilot plant reconfiguration, testing & optimization (T5.4)

PCB disassembly pilot station reconfiguration, testing & optimization

PCB disassembly pilot station reconfiguration, testing & optimization (T5.2)

Websites, patent fillings, videos etc. (3)

Dissemination videos

Dissemination videos (T7.2)

Communication material

Communication material T72

Workshop and summer school

Workshop and summer school (T7.3)

Open Research Data Pilot (1)

Validation of pilot plants circularity level

Validation of pilot plants circularity level (T6.4)

Publicaciones

Conference proceedings (7)

Enhancing the Sustainability of the Electronics in the Automotive Sector in the Context of Circular Economy Through a Decision-Making Framework

Autores: Alessandro Fontana, Ludovica Rossi, Jennifer Nika, Siro Dell’Ambrogio, Marzio Sorlini, Elia Ruiz Pachon, Paolo Rosa, Antoinette Van Schaik, Markus A. Reuter
Publicado en: EGG 2024 conference, 2024
Editor: Conference

Advancing Sustainability and Circularity in the Automotive Industry: A Data-Driven Platform Approach

Autores: Michele Sesana, Veronica Antonello, Mattia Calabresi, Alessandro Fontana, Ludovica Rossi, Jennifer Nika, Giuseppe Landolfi, Marzio Sorlini, Paolo Rosa
Publicado en: EGG 2024 Conference, 2024
Editor: Conference

Twin Transition Waste Electric and Electronic Equipment Roadmapping Tool to support improvement of environmental sustainability performance of reverse e-waste value chains

Autores: Daniele Perossa; Federica Acerbi; Paolo Rosa; Sergio Terzi
Publicado en: PLM24 conference, 2024
Editor: Conference
DOI: 10.5281/zenodo.13684152

Exergy cost associated with polymers recycling in vehicles: from qualitative to quantitative indicators (POSTER)

Autores: S.Russo, A. Valero, A. Ortego, M. Iglesias-Émbil, R. Magdalena
Publicado en: 36th International conference on efficiency, cost, optimization,simulation and environmental impact of energy systems, 2023
Editor: Conference
DOI: 10.5281/zenodo.13683925

Identification of critical raw materials and potential bottlenecks in vehicles through a thermodynamic approach

Autores: Ricardo Magdalena 1, Alicia Valero2, Abel Ortego3, Marta Iglesias4
Publicado en: 35th international conference on efficiency, cost, optimization, simulation and environmental impact of energy systems, 2022
Editor: Conference
DOI: 10.5281/zenodo.13584602

Exergy Strategies for the Circular Economy: Dismantling, Disassembly, Eco-design and Recycling in Electric Vehicles

Autores: Samuel Alcoceba, Nicolás Villanueva, Abel Ortego, Jorge Torrubia, Francisco Moreno, Carlos Monné, Alicia Valero
Publicado en: 37th international conference on efficiency, cost, optimization, simulation and environmental impact of energy systems, 2024
Editor: Conference
DOI: 10.5281/zenodo.13595727

Circular economy in car electronics - A case study of the combi meter and the infotainment of the Seat Leon II model

Autores: Ortego, A., Valero, A., van Schaik, A., Iglesias-Embil, M.E., Reuter, M.A., Alcoceba Pascual, S
Publicado en: 11th International Conference on Industrial Ecology 2023, 2023
Editor: ISIE 2023
DOI: 10.5281/zenodo.13598696

Peer reviewed articles (6)

Criticality and Recyclability Assessment of Car Parts—A Thermodynamic Simulation-Based Approach

Autores: Marta Iglesias-Émbil, Alejandro Abadías, Alicia Valero, Guiomar Calvo, Markus Andreas Reuter, Abel Ortego
Publicado en: Sustainability, Edición 15, 2024, Página(s) 91, ISSN 2071-1050
Editor: MDPI Open Access Publishing
DOI: 10.3390/su15010091

Disassemblability Assessment of Car Parts: Lessons Learned from an Ecodesign Perspective

Autores: Abel Ortego; Marta Iglesias-Émbil; Alicia Valero; Miquel Gimeno-Fabra; Carlos Monné; Francisco Moreno
Publicado en: Crossref, Edición 1, 2024, Página(s) 1-17, ISSN 2071-1050
Editor: MDPI Open Access Publishing
DOI: 10.3390/su16062311

Exergy Assessment of Plastic Car Parts

Autores: Ortego, Abel ; Russo, Sofia ; Iglesias-Émbil, Marta ; Valero, Alicia ; Magdalena, Ricardo
Publicado en: Vehicles, Edición 5(3), 2023, Página(s) 1211-1226, ISSN 2624-8921
Editor: MDPI
DOI: 10.3390/vehicles5030067

Chemical Characterization of an ARDUINO® Board and Its Surface Mount Devices for the Evaluation of Their Intrinsic Economic Value

Autores: Pietro Romano, Nicolò Maria Ippolito, Francesco Vegliò
Publicado en: Processes, Edición 11, 2023, Página(s) 1911, ISSN 2227-9717
Editor: MDPI Open Access Publishing
DOI: 10.3390/pr11071911

Recovery of Metals from Printed Circuit Boards by Gold-REC 1 Hydrometallurgical Process

Autores: Nicolo Maria Ippolito; Marco Passadoro; Francesco Ferella; Giorgio Pellei; Francesco Veglio
Publicado en: Sustainability, 2023, ISSN 2071-1050
Editor: MDPI Open Access Publishing
DOI: 10.3390/su15097348

Disassembly of in-plastic embedded printed electronics

Autores: Stephan, Harkema, Peter A., Rensing, Sanne M.D.C., Domensino, Joris M., Vermeijlen, Diana E., Godoi Bizarro, Antoinette, van Schaik
Publicado en: Journal of Cleaner Production, Edición 450, 2024, Página(s) 141837, ISSN 1879-1786
Editor: Zenodo
DOI: 10.1016/j.jclepro.2024.141837

Other (1)

D6.4: Validation of pilot plants circularity level (ORDP)

Autores: Ricardo Magdalena; Alicia Valero Nicolo Maria Ippolito Ludovica Rossi Lorenzo Gandini
Publicado en: 2024
Editor: Zenodo
DOI: 10.5281/zenodo.12200071