COncurrent METAmaterial-Structure design using functionally graded metamaterials

Información del proyecto

CoMetaS

Identificador del acuerdo de subvención: 101007815

DOI

10.3030/101007815

Proyecto cerrado

Fecha de la firma de la CE 26 Octubre 2020

Fecha de inicio 1 Agosto 2021

Fecha de finalización 31 Julio 2025

Financiado con arreglo a

• EXCELLENT SCIENCE - Marie Skłodowska-Curie Actions

Coste total

€ 924 600,00

Aportación de la UE

€ 924 600,00

Coordinado por

UNIVERSIDAD POLITECNICA DE MADRID
Spain

CORDIS proporciona enlaces a los documentos públicos y las publicaciones de los proyectos de los programas marco HORIZONTE.

Los enlaces a los documentos y las publicaciones de los proyectos del Séptimo Programa Marco, así como los enlaces a algunos tipos de resultados específicos, como conjuntos de datos y «software», se obtienen dinámicamente de OpenAIRE .

Resultado final

Documents, reports (9)

WP1 final results: Report of the design and test of the functionally-graded metamaterials and of the demonstrative prototype

A technical report including the design and test of the functionally-graded metamaterials and the demonstrative prototype. Includes communication and dissemination papers. . Secondments. Training

WP4 final results: Algorithms for concurrent MM-structure design & applications

Algorithms for concurrent MM-structure design. Applications. Dissemination report and demonstrative open-source codes. Secondments. Training

WP3 mid-term results: Report on Preliminar studies on Machine Learning and Model Order Reduction techniques for FGMM

Preliminar studies on Machine Learning and Model Order Reduction techniques for FGMMSelection of techniques of Machine Learning and Model Order Reduction techniques to apply to metamaterials Preliminar examples Dissemination papers Some simple proofofconcept demonstrative codes Secondments Training

WP4 mid-term results: Algorithms for MM topology optimizations

Algorithms for MM topology optimizationsAlgorithms for MM cell topology optimization and functionally graded metamaterial layout Dissemination papers Secondments Training

WP2 final results: Report on simulation of the experiments performed on 3D printed metamaterials and Functionally Graded Metamaterials

Simulation of the experiments performed on 3D printed metamaterials and Functionally Graded Metamaterials. Dissemination papers. Secondments. Training

WP1 mid-term results: Report on Material selection, 3D printed material and metameterial cells. Manufacturing and testing.

Report on Material selection 3D printed material and metameterial cells Manufacturing and testing Dissemination Communication Secondments Training

WP2 mid-term results: Report on formulations of crystal plasticity models and continuum-based models, and initial simulations

Formulations of crystal plasticity models and continuumbased models and initial simulations Includes dissemination papers

WP6: Open Source example codes

Open Source codes

WP3 final results: Models and codes for parametrized surrogate models

Models and codes for parametrized surrogate modelsModels, algorithms and codes (open-source) of parametrized surrogate models. Dissemination report. Secondments. Training

Websites, patent fillings, videos etc. (1)

Media communication package (sites & channels)

Website including intranet of the website twitter channel Researchgate Youtube channel and Linkedin

Publicaciones

Peer reviewed articles (12)

3DMECMET: A package to fill with metamaterials CAD designs and export them to structural calculation softwares and 3D printable formats

Autores: Ismael Ben-Yelun Insenser, Elemer José San Miguel Niddam, Luis Saucedo-Mora, Miguel Ángel Sanz Gómez, José María Benitez Baena, Francisco Montans Leal
Publicado en: Software Impacts, Edición 18, 2023, Página(s) 100594, ISSN 2665-9638
Editor: Elsevier BV
DOI: 10.1016/j.simpa.2023.100594

Incorporation of Defects in Finite Elements to Model Effective Mechanical Properties of Metamaterial Cells Printed by Selective Laser Melting

Autores: Gonzalo Vera-Rodríguez, Laura Moreno-Corrales, Iván Marín-González, Daniel Barba, Francisco J. Montáns, Miguel Ángel Sanz-Gómez
Publicado en: Sustainability, Edición 16, 2024, Página(s) 1167, ISSN 2071-1050
Editor: MDPI Open Access Publishing
DOI: 10.3390/su16031167

Multi-scale energy homogenization for 3D printed microstructures with a Diritchlet boundary condition relaxation under plastic deformation

Autores: Antonio Tabanera, Luis Saucedo-Mora, Miguel Angel Sanz, Francisco J. Montans
Publicado en: Results in Engineering, Edición 21, 2025, Página(s) 101652, ISSN 2590-1230
Editor: Elsevier BV
DOI: 10.1016/j.rineng.2023.101652

Using the Mooney Space to Characterize the Non-Affine Behavior of Elastomers

Autores: Laura Moreno-Corrales, Miguel Ángel Sanz-Gómez, José María Benítez, Luis Saucedo-Mora, Francisco J. Montáns
Publicado en: Materials, Edición 17, 2024, Página(s) 1098, ISSN 1996-1944
Editor: MDPI Open Access Publishing
DOI: 10.3390/ma17051098

Self-learning locally-optimal hypertuning using maximum entropy, and comparison of machine learning approaches for estimating fatigue life in composite materials of the aerospace industry

Autores: Ismael Ben-Yelun, Miguel Díaz-Lago, Luis Saucedo-Mora, Miguel Ángel Sanz, Ricardo Callado, Francisco Javier Montáns
Publicado en: Engineering Structures, 2023, ISSN 0141-0296
Editor: Pergamon Press Ltd.
DOI: 10.1016/j.engstruct.2023.115829

Crossing Scales: Data-Driven Determination of the Micro-scale Behavior of Polymers From Non-homogeneous Tests at the Continuum-Scale

Autores: Víctor J. Amores1*, Francisco J. Montáns 1,2, Elías Cueto 3 and wFrancisco Chinesta 4
Publicado en: Sec. Computational Materials Science, 2022, ISSN 0927-0256
Editor: Elsevier BV
DOI: 10.3389/fmats.2022.879614

Robust topology optimisation of lattice structures with spatially correlated uncertainties

Autores: Ismael Ben-Yelun, Ahmet Oguzhan Yuksel, Fehmi Cirak
Publicado en: Structural and Multidisciplinary Optimization, Edición 67, 2024, Página(s) 1-19, ISSN 1615-147X
Editor: Springer Verlag
DOI: 10.1007/s00158-023-03716-4

Topology optimization approach for functionally graded metamaterial components based on homogenization of mechanical variables.

Autores: Ben-Yelun, I., Saucedo-Mora, L., Sanz, M. Á., Benítez, J. M., & Montans, F. J.
Publicado en: Computers and Structures, Edición 289, 2023, Página(s) 107151, ISSN 0045-7949
Editor: Pergamon Press Ltd.
DOI: 10.1016/j.compstruc.2023.107151

Biologically-inspired aerodynamic shape optimization for low Reynolds regimes

Autores: Guilhaumon C., Arias, J., Rodríguez-Sevillano, A.A. Saucedo-Mora, L., Montáns, F.J.
Publicado en: Results in Engineering, Edición 20, 2023, Página(s) 101442, ISSN 2590-1230
Editor: Elsevier
DOI: 10.1016/j.rineng.2023.101442

A model for rubber-like materials with three parameters obtained from a tensile test

Autores: Víctor Jesús Amores; Laura Moreno; José María Benítez; Francisco Javier Montáns
Publicado en: European Journal of Mechanics A/Solids, Edición 1, 2023, ISSN 0997-7538
Editor: Elsevier BV
DOI: 10.1016/j.euromechsol.2023.104931

GAM: General Auxetic Metamaterial with Tunable 3D Auxetic Behavior Using the Same Unit Cell Boundary Connectivity

Autores: Ismael Ben-Yelun,Guillermo Gómez-Carano,Francisco J. San Millán, Miguel Ángel Sanz, Francisco Javier MontánS, and Luis Saucedo-Mora
Publicado en: Materials MDPI, 2023, ISSN 1996-1944
Editor: MDPI Open Access Publishing
DOI: 10.3390/ma16093473

The Updated Properties Model (UPM): A topology optimization algorithm for the creation of macro–micro optimized structures with variable stiffness

Autores: Luis Saucedo-Mora, Ismael Ben-Yelun, Hugo García-Modet, Miguel Ángel Sanz-Gómez, Francisco Javier Montáns
Publicado en: Finite Elements in Analysis and Design, 2023, ISSN 0168-874X
Editor: Elsevier BV
DOI: 10.1016/j.finel.2023.103970

Conference proceedings (1)

Robust topology optimisation of lattice structures with spatially correlated uncertainties

Autores: Ahmet Oguzhan Yuksel, Ismael Ben-Yelun, Fehmi Cirak
Publicado en: Proceedings of the 2024 UK Association for Computational Mechanics Conference, Edición Yearly Conference, 2024, Página(s) 214-217
Editor: Durham University
DOI: 10.62512/conf.ukacm2024.061

Other (1)

An elastic properties-based topology optimization algorithm for linear orthotropic, functionally graded materials

Autores: Ismael Ben-Yelun, Víctor Riera, Luis Saucedo-Mora, Miguel Ángel Sanz, Francisco Javier Montáns
Publicado en: ArXiv, 2023
Editor: Cornell Library
DOI: 10.48550/arxiv.2309.12012