COncurrent METAmaterial-Structure design using functionally graded metamaterials

Projektinformationen

CoMetaS

ID Finanzhilfevereinbarung: 101007815

DOI

10.3030/101007815

Projekt abgeschlossen

EK-Unterschriftsdatum 26 Oktober 2020

Startdatum 1 August 2021

Enddatum 31 Juli 2025

Finanziert unter

• EXCELLENT SCIENCE - Marie Skłodowska-Curie Actions

Gesamtkosten

€ 924 600,00

EU-Beitrag

€ 924 600,00

Koordiniert durch

UNIVERSIDAD POLITECNICA DE MADRID
Spain

CORDIS bietet Links zu öffentlichen Ergebnissen und Veröffentlichungen von HORIZONT-Projekten.

Links zu Ergebnissen und Veröffentlichungen von RP7-Projekten sowie Links zu einigen Typen spezifischer Ergebnisse wie Datensätzen und Software werden dynamisch von OpenAIRE abgerufen.

Leistungen

Documents, reports (9)

WP1 final results: Report of the design and test of the functionally-graded metamaterials and of the demonstrative prototype

A technical report including the design and test of the functionally-graded metamaterials and the demonstrative prototype. Includes communication and dissemination papers. . Secondments. Training

WP4 final results: Algorithms for concurrent MM-structure design & applications

Algorithms for concurrent MM-structure design. Applications. Dissemination report and demonstrative open-source codes. Secondments. Training

WP3 mid-term results: Report on Preliminar studies on Machine Learning and Model Order Reduction techniques for FGMM

Preliminar studies on Machine Learning and Model Order Reduction techniques for FGMMSelection of techniques of Machine Learning and Model Order Reduction techniques to apply to metamaterials Preliminar examples Dissemination papers Some simple proofofconcept demonstrative codes Secondments Training

WP4 mid-term results: Algorithms for MM topology optimizations

Algorithms for MM topology optimizationsAlgorithms for MM cell topology optimization and functionally graded metamaterial layout Dissemination papers Secondments Training

WP2 final results: Report on simulation of the experiments performed on 3D printed metamaterials and Functionally Graded Metamaterials

Simulation of the experiments performed on 3D printed metamaterials and Functionally Graded Metamaterials. Dissemination papers. Secondments. Training

WP1 mid-term results: Report on Material selection, 3D printed material and metameterial cells. Manufacturing and testing.

Report on Material selection 3D printed material and metameterial cells Manufacturing and testing Dissemination Communication Secondments Training

WP2 mid-term results: Report on formulations of crystal plasticity models and continuum-based models, and initial simulations

Formulations of crystal plasticity models and continuumbased models and initial simulations Includes dissemination papers

WP6: Open Source example codes

Open Source codes

WP3 final results: Models and codes for parametrized surrogate models

Models and codes for parametrized surrogate modelsModels, algorithms and codes (open-source) of parametrized surrogate models. Dissemination report. Secondments. Training

Websites, patent fillings, videos etc. (1)

Media communication package (sites & channels)

Website including intranet of the website twitter channel Researchgate Youtube channel and Linkedin

Veröffentlichungen

Peer reviewed articles (12)

3DMECMET: A package to fill with metamaterials CAD designs and export them to structural calculation softwares and 3D printable formats

Autoren: Ismael Ben-Yelun Insenser, Elemer José San Miguel Niddam, Luis Saucedo-Mora, Miguel Ángel Sanz Gómez, José María Benitez Baena, Francisco Montans Leal
Veröffentlicht in: Software Impacts, Ausgabe 18, 2023, Seite(n) 100594, ISSN 2665-9638
Herausgeber: Elsevier BV
DOI: 10.1016/j.simpa.2023.100594

Incorporation of Defects in Finite Elements to Model Effective Mechanical Properties of Metamaterial Cells Printed by Selective Laser Melting

Autoren: Gonzalo Vera-Rodríguez, Laura Moreno-Corrales, Iván Marín-González, Daniel Barba, Francisco J. Montáns, Miguel Ángel Sanz-Gómez
Veröffentlicht in: Sustainability, Ausgabe 16, 2024, Seite(n) 1167, ISSN 2071-1050
Herausgeber: MDPI Open Access Publishing
DOI: 10.3390/su16031167

Multi-scale energy homogenization for 3D printed microstructures with a Diritchlet boundary condition relaxation under plastic deformation

Autoren: Antonio Tabanera, Luis Saucedo-Mora, Miguel Angel Sanz, Francisco J. Montans
Veröffentlicht in: Results in Engineering, Ausgabe 21, 2025, Seite(n) 101652, ISSN 2590-1230
Herausgeber: Elsevier BV
DOI: 10.1016/j.rineng.2023.101652

Using the Mooney Space to Characterize the Non-Affine Behavior of Elastomers

Autoren: Laura Moreno-Corrales, Miguel Ángel Sanz-Gómez, José María Benítez, Luis Saucedo-Mora, Francisco J. Montáns
Veröffentlicht in: Materials, Ausgabe 17, 2024, Seite(n) 1098, ISSN 1996-1944
Herausgeber: MDPI Open Access Publishing
DOI: 10.3390/ma17051098

Self-learning locally-optimal hypertuning using maximum entropy, and comparison of machine learning approaches for estimating fatigue life in composite materials of the aerospace industry

Autoren: Ismael Ben-Yelun, Miguel Díaz-Lago, Luis Saucedo-Mora, Miguel Ángel Sanz, Ricardo Callado, Francisco Javier Montáns
Veröffentlicht in: Engineering Structures, 2023, ISSN 0141-0296
Herausgeber: Pergamon Press Ltd.
DOI: 10.1016/j.engstruct.2023.115829

Crossing Scales: Data-Driven Determination of the Micro-scale Behavior of Polymers From Non-homogeneous Tests at the Continuum-Scale

Autoren: Víctor J. Amores1*, Francisco J. Montáns 1,2, Elías Cueto 3 and wFrancisco Chinesta 4
Veröffentlicht in: Sec. Computational Materials Science, 2022, ISSN 0927-0256
Herausgeber: Elsevier BV
DOI: 10.3389/fmats.2022.879614

Robust topology optimisation of lattice structures with spatially correlated uncertainties

Autoren: Ismael Ben-Yelun, Ahmet Oguzhan Yuksel, Fehmi Cirak
Veröffentlicht in: Structural and Multidisciplinary Optimization, Ausgabe 67, 2024, Seite(n) 1-19, ISSN 1615-147X
Herausgeber: Springer Verlag
DOI: 10.1007/s00158-023-03716-4

Topology optimization approach for functionally graded metamaterial components based on homogenization of mechanical variables.

Autoren: Ben-Yelun, I., Saucedo-Mora, L., Sanz, M. Á., Benítez, J. M., & Montans, F. J.
Veröffentlicht in: Computers and Structures, Ausgabe 289, 2023, Seite(n) 107151, ISSN 0045-7949
Herausgeber: Pergamon Press Ltd.
DOI: 10.1016/j.compstruc.2023.107151

Biologically-inspired aerodynamic shape optimization for low Reynolds regimes

Autoren: Guilhaumon C., Arias, J., Rodríguez-Sevillano, A.A. Saucedo-Mora, L., Montáns, F.J.
Veröffentlicht in: Results in Engineering, Ausgabe 20, 2023, Seite(n) 101442, ISSN 2590-1230
Herausgeber: Elsevier
DOI: 10.1016/j.rineng.2023.101442

A model for rubber-like materials with three parameters obtained from a tensile test

Autoren: Víctor Jesús Amores; Laura Moreno; José María Benítez; Francisco Javier Montáns
Veröffentlicht in: European Journal of Mechanics A/Solids, Ausgabe 1, 2023, ISSN 0997-7538
Herausgeber: Elsevier BV
DOI: 10.1016/j.euromechsol.2023.104931

GAM: General Auxetic Metamaterial with Tunable 3D Auxetic Behavior Using the Same Unit Cell Boundary Connectivity

Autoren: Ismael Ben-Yelun,Guillermo Gómez-Carano,Francisco J. San Millán, Miguel Ángel Sanz, Francisco Javier MontánS, and Luis Saucedo-Mora
Veröffentlicht in: Materials MDPI, 2023, ISSN 1996-1944
Herausgeber: MDPI Open Access Publishing
DOI: 10.3390/ma16093473

The Updated Properties Model (UPM): A topology optimization algorithm for the creation of macro–micro optimized structures with variable stiffness

Autoren: Luis Saucedo-Mora, Ismael Ben-Yelun, Hugo García-Modet, Miguel Ángel Sanz-Gómez, Francisco Javier Montáns
Veröffentlicht in: Finite Elements in Analysis and Design, 2023, ISSN 0168-874X
Herausgeber: Elsevier BV
DOI: 10.1016/j.finel.2023.103970

Conference proceedings (1)

Robust topology optimisation of lattice structures with spatially correlated uncertainties

Autoren: Ahmet Oguzhan Yuksel, Ismael Ben-Yelun, Fehmi Cirak
Veröffentlicht in: Proceedings of the 2024 UK Association for Computational Mechanics Conference, Ausgabe Yearly Conference, 2024, Seite(n) 214-217
Herausgeber: Durham University
DOI: 10.62512/conf.ukacm2024.061

Other (1)

An elastic properties-based topology optimization algorithm for linear orthotropic, functionally graded materials

Autoren: Ismael Ben-Yelun, Víctor Riera, Luis Saucedo-Mora, Miguel Ángel Sanz, Francisco Javier Montáns
Veröffentlicht in: ArXiv, 2023
Herausgeber: Cornell Library
DOI: 10.48550/arxiv.2309.12012