Digital fabrication and integration of Material reuse for environmentally friendly cementitious composite building blocks

Project Information

DigiMat

Grant agreement ID: 101029471

DOI

10.3030/101029471

Project closed

EC signature date 20 April 2021

Start date 1 January 2022

End date 31 December 2023

Funded under

• EXCELLENT SCIENCE - Marie Skłodowska-Curie Actions

Total cost

€ 212 933,76

EU contribution

€ 212 933,76

Coordinated by

BRUNEL UNIVERSITY LONDON
United Kingdom

CORDIS provides links to public deliverables and publications of HORIZON projects.

Links to deliverables and publications from FP7 projects, as well as links to some specific result types such as dataset and software, are dynamically retrieved from OpenAIRE .

Publications

Peer reviewed articles (8)

Lightweight alkali-activated materials and ordinary Portland cement composites using recycled polyvinyl chloride and waste glass aggregates to fully replace natural sand

Author(s): Eslam El-Seidy; Mehdi Chougan; Matteo Sambucci; Mazen J. Al-Kheetan; Ilario Biblioteca; Marco Valente; Seyed Hamidreza Ghaffar
Published in: Construction & Building Materials, Issue 2, 2023, ISSN 1879-0526
Publisher: Elsevier
DOI: 10.1016/j.conbuildmat.2023.130399

Mechanical and physical characteristics of alkali- activated mortars incorporated with recycled polyvinyl chloride and rubber aggregates

Author(s): Eslam El-Seidy; Matteo Sambucci; Mehdi Chougan; Mazen J. Al-Kheetan; Ilario Biblioteca; Marco Valente; Seyed Hamidreza Ghaffar
Published in: Journal of Building Engineering, Issue 1, 2022, ISSN 2352-7102
Publisher: Elsevier
DOI: 10.1016/j.jobe.2022.105043

Effect of natural and calcined halloysite clay minerals as low-costadditives on the performance of 3D-printed alkali-activated materials

Author(s): Mehdi Chougan, Seyed Hamidreza Ghaffar, Behzad Nematollahi, Pawel Sikora, Tobias Dorn, Dietmar Stephan, Abdulrahman Albar, Mazen J Al-Kheetan
Published in: Materials and Design, Issue 1, 2022, ISSN 1873-4197
Publisher: Elsevier
DOI: 10.14279/depositonce-16900

The impact of waste brick and geo-cement aggregates as sand replacement on the mechanical and durability properties of alkali–activated mortar composites

Author(s): Eslam El-Seidy, Mehdi Chougan, Yazeed A. AI-Noaimat, Mazen J. Al-Kheetan, Seyed Hamidreza Ghaffar
Published in: Results in Engineering, 2024, ISSN 2590-1230
Publisher: Elsevier
DOI: 10.1016/j.rineng.2024.101797

Recycled brick aggregates in one-part alkali-activated materials: Impact on 3D printing performance and material properties

Author(s): Yazeed A. Al-Noaimat, Mehdi Chougan, Mazen J. Al-Kheetan, Szymon Skibicki, Karol Federowicz, Marcin Hoffman, Daniel Sibera, Krzysztof Cendrowski, Mateusz Techman, João Nuno Pacheco, Sang-Yeop Chung, Pawel Sikora, Seyed Hamidreza Ghaffar
Published in: Developments in the Built Environment, 2023, ISSN 2666-1659
Publisher: Elsevier
DOI: 10.1016/j.dibe.2023.100248

Upcycling end-of-life bricks in high-performance one-part alkali-activated materials

Author(s): Yazeed A. Al-Noaimat, Mehdi Chougan, Mazen J Al-kheetan, Marcus H. N. Yio, Hong S. Wong, Seyed Hamidreza Ghaffar
Published in: Developments in the Built Environment, 2023, ISSN 2666-1659
Publisher: Elsevier
DOI: 10.1016/j.dibe.2023.100231

Alkali activated materials with recycled unplasticised polyvinyl chloride aggregates for sand replacement

Author(s): Eslam El-Seidy, Matteo Sambucci, Mehdi Chougan, Yazeed A. AI-Noaimat, Mazen J. Al-Kheetan, Ilario Biblioteca, Marco Valente, Seyed Hamidreza Ghaffar
Published in: Construction & Building Materials, 2023, ISSN 1879-0526
Publisher: Elsevier
DOI: 10.1016/j.conbuildmat.2023.134188

A review of 3D printing low-carbon concrete with one-part geopolymer: Engineering, environmental and economic feasibility

Author(s): Yazeed A. Al-Noaimat; Seyed Hamidreza Ghaffar; Mehdi Chougan; Mazen J. Al-Kheetan
Published in: Case Studies in Construction Materials, Issue 1, 2023, ISSN 2214-5095
Publisher: Elsevier BV
DOI: 10.1016/j.cscm.2022.e01818

Conference proceedings (3)

Alkali-activated cementitious composites and their potentials in concrete 3D printing

Author(s): Chougan, Mehdi
Published in: Issue 5, 2023
Publisher: University of Rome Sapienza
DOI: 10.5281/zenodo.10580518

3D printing of cement-free construction materials using nano additives as rheology modifier

Author(s): Chougan, Mehdi
Published in: Issue 1, 2022
Publisher: West Pomeranian University of Technology
DOI: 10.5281/zenodo.10580546

Digital fabrication and integration of Material reuse for environmentally friendly cementitious composites building blocks

Author(s): Chougan, Mehdi
Published in: Issue 1, 2022
Publisher: Brunel University London
DOI: 10.5281/zenodo.10580501