Digital fabrication and integration of Material reuse for environmentally friendly cementitious composite building blocks

Publicaciones

Lightweight alkali-activated materials and ordinary Portland cement composites using recycled polyvinyl chloride and waste glass aggregates to fully replace natural sand

Autores: Eslam El-Seidy; Mehdi Chougan; Matteo Sambucci; Mazen J. Al-Kheetan; Ilario Biblioteca; Marco Valente; Seyed Hamidreza Ghaffar
Publicado en: Construction & Building Materials, Edición 2, 2023, ISSN 1879-0526
Editor: Elsevier
DOI: 10.1016/j.conbuildmat.2023.130399

Mechanical and physical characteristics of alkali- activated mortars incorporated with recycled polyvinyl chloride and rubber aggregates

Autores: Eslam El-Seidy; Matteo Sambucci; Mehdi Chougan; Mazen J. Al-Kheetan; Ilario Biblioteca; Marco Valente; Seyed Hamidreza Ghaffar
Publicado en: Journal of Building Engineering, Edición 1, 2022, ISSN 2352-7102
Editor: Elsevier
DOI: 10.1016/j.jobe.2022.105043

Effect of natural and calcined halloysite clay minerals as low-costadditives on the performance of 3D-printed alkali-activated materials

Autores: Mehdi Chougan, Seyed Hamidreza Ghaffar, Behzad Nematollahi, Pawel Sikora, Tobias Dorn, Dietmar Stephan, Abdulrahman Albar, Mazen J Al-Kheetan
Publicado en: Materials and Design, Edición 1, 2022, ISSN 1873-4197
Editor: Elsevier
DOI: 10.14279/depositonce-16900

The impact of waste brick and geo-cement aggregates as sand replacement on the mechanical and durability properties of alkali–activated mortar composites

Autores: Eslam El-Seidy, Mehdi Chougan, Yazeed A. AI-Noaimat, Mazen J. Al-Kheetan, Seyed Hamidreza Ghaffar
Publicado en: Results in Engineering, 2024, ISSN 2590-1230
Editor: Elsevier
DOI: 10.1016/j.rineng.2024.101797

Recycled brick aggregates in one-part alkali-activated materials: Impact on 3D printing performance and material properties

Autores: Yazeed A. Al-Noaimat, Mehdi Chougan, Mazen J. Al-Kheetan, Szymon Skibicki, Karol Federowicz, Marcin Hoffman, Daniel Sibera, Krzysztof Cendrowski, Mateusz Techman, João Nuno Pacheco, Sang-Yeop Chung, Pawel Sikora, Seyed Hamidreza Ghaffar
Publicado en: Developments in the Built Environment, 2023, ISSN 2666-1659
Editor: Elsevier
DOI: 10.1016/j.dibe.2023.100248

Upcycling end-of-life bricks in high-performance one-part alkali-activated materials

Autores: Yazeed A. Al-Noaimat, Mehdi Chougan, Mazen J Al-kheetan, Marcus H. N. Yio, Hong S. Wong, Seyed Hamidreza Ghaffar
Publicado en: Developments in the Built Environment, 2023, ISSN 2666-1659
Editor: Elsevier
DOI: 10.1016/j.dibe.2023.100231

Alkali activated materials with recycled unplasticised polyvinyl chloride aggregates for sand replacement

Autores: Eslam El-Seidy, Matteo Sambucci, Mehdi Chougan, Yazeed A. AI-Noaimat, Mazen J. Al-Kheetan, Ilario Biblioteca, Marco Valente, Seyed Hamidreza Ghaffar
Publicado en: Construction & Building Materials, 2023, ISSN 1879-0526
Editor: Elsevier
DOI: 10.1016/j.conbuildmat.2023.134188

A review of 3D printing low-carbon concrete with one-part geopolymer: Engineering, environmental and economic feasibility

Autores: Yazeed A. Al-Noaimat; Seyed Hamidreza Ghaffar; Mehdi Chougan; Mazen J. Al-Kheetan
Publicado en: Case Studies in Construction Materials, Edición 1, 2023, ISSN 2214-5095
Editor: Elsevier BV
DOI: 10.1016/j.cscm.2022.e01818

Alkali-activated cementitious composites and their potentials in concrete 3D printing

Autores: Chougan, Mehdi
Publicado en: Edición 5, 2023
Editor: University of Rome Sapienza
DOI: 10.5281/zenodo.10580518

3D printing of cement-free construction materials using nano additives as rheology modifier

Autores: Chougan, Mehdi
Publicado en: Edición 1, 2022
Editor: West Pomeranian University of Technology
DOI: 10.5281/zenodo.10580546

Digital fabrication and integration of Material reuse for environmentally friendly cementitious composites building blocks

Autores: Chougan, Mehdi
Publicado en: Edición 1, 2022
Editor: Brunel University London
DOI: 10.5281/zenodo.10580501

Buscando datos de OpenAIRE...

Publicaciones

Compartir esta página

Descargar