Hyperconnected simulation ecosystem supporting probabilistic design and predictive manufacturing of next generation aircraft structures

Información del proyecto

CAELESTIS

Identificador del acuerdo de subvención: 101056886

DOI

10.3030/101056886

Proyecto cerrado

Fecha de la firma de la CE 25 Abril 2022

Fecha de inicio 1 Mayo 2022

Fecha de finalización 31 Octubre 2025

Financiado con arreglo a

• Climate, Energy and Mobility

Coste total

€ 5 956 882,75

Aportación de la UE

€ 5 956 880,00

Coordinado por

ASOCIACION DE INVESTIGACION METALURGICA DEL NOROESTE
Spain

CORDIS proporciona enlaces a los documentos públicos y las publicaciones de los proyectos de los programas marco HORIZONTE.

Los enlaces a los documentos y las publicaciones de los proyectos del Séptimo Programa Marco, así como los enlaces a algunos tipos de resultados específicos, como conjuntos de datos y «software», se obtienen dinámicamente de OpenAIRE .

Resultado final

Other (5)

Digital product module for HPC

D3.3 Digital product module for HPC, describing the verification and validation of the digital product module at HPC level and the constitutive models using ALYA code. (Task 3.4)(OTHER) (PU) (M24 - BSC).

Open-source code and probabilistic material models

D3.2 Open-source code and probabilistic material models to be used by any FEM code as a material law obtained from a user material (Python implementations). (Task 3.3)(OTHER) (PU) (M18 - TUD)

CAELESTIS Hyperconnected Interoperable Simulation Ecosystem architecture & PRESS analysis

D2.1 CAELESTIS Interoperable Simulation Ecosystem architecture and PRESS analysis, describing the digital ecosystem architecture (DET and HPC), interoperability methods and security threats and risk factors.(Task 2.3)(OTHER-R) (PU) (M19 - BSC)

UQ&M strategy for product and manufacturing

D5.1 UQ&M strategy for product and manufacturing, including the strategy to obtain design allowables, knock down factors and algorithms for stochastic AFP-RTM process quantification (Task 5.1)(OTHER) (PU) (M29 - JVN).

CAELESTIS software and adaptive simulation workflow implementation

D2.2 CAELESTIS software and adaptative simulation workflow implementation, describing the software implemented in the digital ecosystem and the adaptative simulation workflows. (Task 2.4)(OTHER) (PU) (M24- BSC).

Documents, reports (5)

Assembly Tolerancing Digital Twin

D4.3: Assembly Tolerancing Digital Twin, including a report and related software for assembly & tolerancing quantification based on MECAmaster. (Task 4.3) (R/OTHER) (PU) (M24 - JVN).

Topology optimization open-source code

D5.3 Topology optimization open-source code corresponding machine learning enhanced topology optimization code in Python. (Task 5.3) (R) (PU) (M29 - TUD).

AFP Process Interoperable Digital Twin with permeability predictions

D4.1 AFP Process Interoperable Digital Twin with permeability predictions, including a report and related software with permeability predictions based on AFP trajectories. (Task 4.1)(R/OTHER) (PU) (M24 - ADD).

Specifications of CAELESTIS Simulation Ecosystem

D11 Specifications for CAELESTIS Simulation Ecosystem comprising interoperability at DET level and for operation with and within HPC including input from key stakeholders Task 13 WP8MAC R PU M7 BSC

RTM Process Interoperable Digital Twin with process defect predictions

D4.2 RTM Process Interoperable Digital Twin with process defect predictions, including a report, multiscale surrogates and numerical workflows for RTM simulations (Task 4.2)(R/OTHER) (PU) (M24 - ITA).

Publicaciones

Conference proceedings (6)

A comprehensive numerical workflow to simulate post-manufacture shape distortions in composite materials

Autores: Y. DENIS
Publicado en: Materials Research Proceedings, Material Forming: ESAFORM 2025, Edición 54, 2025
Editor: Materials Research Forum LLC
DOI: 10.21741/9781644903599-43

DEEP LEARNING FOR MODELING OF MULTISCALE FLOW PHENOMENA IN COMPOSITES MANUFACTURING

Autores: BARIS ÇAGLAR, Guillaume BROGGI
Publicado en: 2023
Editor: JPCM-15
DOI: 10.5281/ZENODO.14204456

Numerical workflow for skin model tolerancing applied to a composite study

Autores: FREYSSINET, Clément
Publicado en: Materials Research Proceedings, 2025
DOI: 10.21741/9781644903599-46

A comprehensive numerical workflow to simulate post-manufacture shape distortions in composite materials

Autores: DENIS, Y.
Publicado en: Materials Research Proceedings, 2025
DOI: 10.21741/9781644903599-43

Numerical workflow for skin model tolerancing applied to a composite study

Autores: Clément FREYSSINET
Publicado en: Materials Research Proceedings, Material Forming: ESAFORM 2025, Edición 54, 2025
Editor: Materials Research Forum LLC
DOI: 10.21741/9781644903599-46

"Influence of Automated Tape Layering (ATL) parameters over permeability and performance for dry CF laminates – CAELESTIS ""Hyperconnected simulation ecosystem supporting probabilistic design and predictive manufacturing of next generation aircraft structur"

Autores: Builes Cárdenas, Cristian Román Rodríguez, Mario Coto Moretti, Maria Ivette ORCID icon Fernández Sóñora, Andrés Rodriguez Senín, Elena
Publicado en: EASN Conference, 2024
Editor: EASN
DOI: 10.5281/zenodo.14204338

Other (2)

Ready for Take Off – progress and outlook in circular aviation

Autores: Webb, Stephen
Publicado en: ISPIM Connects Salzburg – The Sound of Innovation (ISPIM), 2023
Editor: RTDS
DOI: 10.5281/ZENODO.10794259

Specifications of CAELESTIS Simulation Ecosystem

Autores: Ejarque, Jorge; Guillamet, Gerard
Publicado en: 2022
Editor: eBOS
DOI: 10.5281/ZENODO.10391231

Peer reviewed articles (9)

International Journal of Mechanical Sciences

Autores: Vallmajó, O.; Arteiro, A.; Guerrero, J.M.; Melro, A.R.; Pupurs, A.; Turon, A.
Publicado en: International Journal of Mechanical Sciences (IJMS), 2024, ISSN 0020-7403
Editor: Elsevier
DOI: 10.1016/j.ijmecsci.2023.108781

Composite Structures

Autores: Vallmajó, O.; Descamps, M.; Arteiro, A.; Turon, A.
Publicado en: Composite Structures, 2025, ISSN 0263-8223
Editor: University of Girona
DOI: 10.1016/J.COMPSTRUCT.2024.118589

Micromechanical analysis of composite materials considering material variability and microvoids

Autores: Vallmajó, O.; Arteiro, A.; Guerrero, J.M.; Melro, A.R.; Pupurs, A.; Turon, A.
Publicado en: International Journal of Mechanical Sciences, 2024, ISSN 1879-2162
Editor: International Journal of Mechanical Sciences
DOI: 10.1016/J.IJMECSCI.2023.108781

Effect of ply misalignment on the notched strength of composite laminates

Autores: O. Vallmajó, M. Descamps, A. Arteiro, A. Turon
Publicado en: Composite Structures, Edición 351, 2024, ISSN 0263-8223
Editor: Elsevier BV
DOI: 10.1016/j.compstruct.2024.118589

A full product/process numerical workflow based on Skin Model Shapes for tolerancing analysis of an assembly of composite parts

Autores: T. MORO, Y. DENIS, N. SIDDIG, Y. LE GUENNEC
Publicado en: Procedia CIRP, Edición 129, 2024, ISSN 2212-8271
Editor: Elsevier BV
DOI: 10.1016/J.PROCIR.2024.10.015

Influence of Automated Fiber Placement (AFP) Parameters over Permeability and Performance for Dry CF Laminates

Autores: Elena Rodríguez Senín; Mario Román Rodríguez; Cristian Builes Cárdenas; Maria Ivette Coto Moretti
Publicado en: EASN 2024, 2025, ISSN 2673-4591
Editor: MDPI
DOI: 10.3390/ENGPROC2025090014

An image-based deep learning framework for flow field prediction in arbitrary-sized fibrous microstructures

Autores: Jimmy Gaspard Jean, Guillaume Broggi, Baris Caglar
Publicado en: Composites Part A: Applied Science and Manufacturing, Edición 200, 2025, ISSN 1359-835X
Editor: Elsevier BV
DOI: 10.1016/J.COMPOSITESA.2025.109337

International Journal of Mechanical Sciences

Autores: O. Vallmajó, A. Arteiro, J.M. Guerrero, A.R. Melro, A. Pupurs, A. Turon
Publicado en: International Journal of Mechanical Sciences, 2023, ISSN 0000-0000
Editor: Science Direct
DOI: 10.1016/j.ijmecsci.2023.108781

New flexible tolerancing strategy and development for complex structural aeronautical assemblies analysis in MECAmaster® software environment

Autores: T. MORO, R. ASKRI, P.-A. RANCE, P. CLOZEL, J. MARTIN, S. VAN DER VEEN, F. CANDERATZ, J.-M. JUDIC
Publicado en: Procedia CIRP, Edición 114, 2023, ISSN 2212-8271
Editor: Elsevier BV
DOI: 10.1016/j.procir.2022.10.023

Thesis and dissertations (1)

Services to support simulation workflows for next generation aircraft structures

Autores: Cecco, Riccardo
Publicado en: 2023
Editor: Facultat d'Informàtica de Barcelona (FIB)