Towards tURbine Blade production with zero waste

Información del proyecto

TURBO

Identificador del acuerdo de subvención: 101058054

DOI

10.3030/101058054

Fecha de la firma de la CE 23 Mayo 2022

Fecha de inicio 1 Octubre 2022

Fecha de finalización 30 Septiembre 2026

Financiado con arreglo a

• Digital, Industry and Space

Coste total

€ 9 447 038,20

Aportación de la UE

€ 6 813 734,00

Coordinado por

DANMARKS TEKNISKE UNIVERSITET
Denmark

CORDIS proporciona enlaces a los documentos públicos y las publicaciones de los proyectos de los programas marco HORIZONTE.

Los enlaces a los documentos y las publicaciones de los proyectos del Séptimo Programa Marco, así como los enlaces a algunos tipos de resultados específicos, como conjuntos de datos y «software», se obtienen dinámicamente de OpenAIRE .

Resultado final

Documents, reports (2)

M3 TURB0 Gender Dimension Review

M3 TURB0 Gender Dimension ReviewUpdates with mid-term and final reporting.

Preliminary report of environmental LCA, LCC and S-LCA

Publicaciones

Peer reviewed articles (16)

Targeting cost-effective and efficient infusion control with real-time sensing and modelling

Autores: Jack M Davies, Peter F Giddings, Janice M-Dulieu Barton, Andrew Jenkins, Dmitry S Ivanov
Publicado en: IOP Conference Series: Materials Science and Engineering, Edición 1338, 2025, ISSN 1757-8981
Editor: IOP Publishing
DOI: 10.1088/1757-899X/1338/1/012045/PDF

Industrial and intelligent process monitoring to reduce defects and shorten cure cycles

Autores: Nikos Pantelelis, Gregoire Lebreton
Publicado en: IOP Conference Series: Materials Science and Engineering, Edición 1338, 2025, ISSN 1757-8981
Editor: IOP Publishing
DOI: 10.1088/1757-899X/1338/1/012044/PDF

Meso-scale permeability prediction from the multi-block 3D reconstruction of fiber reinforced polymer composite with experimental validation

Autores: Debabrata Adhikari, Jesper John Lisegaard, Robert S. Pierce, Lars Pilgaard Mikkelsen, Jesper Henri Hattel, Sankhya Mohanty
Publicado en: Composites Science and Technology, Edición 271, 2025, ISSN 0266-3538
Editor: Elsevier BV
DOI: 10.1016/J.COMPSCITECH.2025.111290

How geometrical imperfections and thermal gradients affect wrinkle formation during curing of thick composite laminates

Autores: J. K. Jørgensen, L. P. Mikkelsen, V. K. Maes
Publicado en: IOP Conference Series: Materials Science and Engineering, Edición 1338, 2025, ISSN 1757-8981
Editor: IOP Publishing
DOI: 10.1088/1757-899X/1338/1/012046/PDF

Repetition rate optimized 2  µm gain-switched diode pumped MIR supercontinuum

Autores: C. R. Smith, D. H. Yeh, P. B. Montague, C. R. Petersen, O. Bang
Publicado en: Journal of the Optical Society of America B, Edición 41, 2024, ISSN 0740-3224
Editor: Optica Publishing Group
DOI: 10.1364/JOSAB.539907

Prediction of Cure‐Induced Wrinkles Aimed at the Manufacturing of Large Wind Turbine Blades

Autores: Jesper K. Jørgensen, Lars P. Mikkelsen, Vincent K. Maes
Publicado en: Polymer Composites, Edición 47, 2026, ISSN 0272-8397
Editor: Wiley
DOI: 10.1002/PC.70797

Non-destructive sub-surface inspection of multi-layer wind turbine blade coatings by mid-infrared optical coherence tomography

Autores: Coraline Lapre, Christian Rosenberg Petersen, Per Nielsen, Thomas Wulf, Jakob Ilsted Bech, Søren Fæster, Ole Bang, Niels Møller Israelsen
Publicado en: Wind Energy Science, Edición 11, 2026, ISSN 2366-7451
Editor: Copernicus GmbH
DOI: 10.5194/WES-11-693-2026

PermXCT: A novel framework for imaging-based virtual permeability prediction

Autores: Debabrata Adhikari, Jesper John Lisegaard, Jesper Henri Hattel, Sankhya Mohanty
Publicado en: SoftwareX, Edición 33, 2026, ISSN 2352-7110
Editor: Elsevier BV
DOI: 10.1016/J.SOFTX.2026.102529

High-power supercontinuum lasers with a flat blue spectrum through pump modulation: a numerical study

Autores: R.E. Hansen, A.M. Moltke, O. Bang
Publicado en: Optics Letters, Edición Vol. 48, Iss. 7, 2023, ISSN 0146-9592
Editor: Optica
DOI: 10.1364/OL.485130

Resin flow models for reinforcement learning for optimal control of LCM

Autores: Jesper Lisegaard, Yann Duplessis Kergomard, Debabrata Adhikari, Jesper Hattel, Sankhya Mohanty
Publicado en: IOP Conference Series: Materials Science and Engineering, Edición 1338, 2025, ISSN 1757-8981
Editor: IOP Publishing
DOI: 10.1088/1757-899X/1338/1/012042/PDF

Reduced order models and high-fidelity CFD simulation of resin infusion within fiber layups for fast determination of meso-scale permeability

Autores: Debabrata Adhikari, Jesper John Lisegaard, Jesper Henri Hattel, Sankhya Mohanty
Publicado en: IOP Conference Series: Materials Science and Engineering, Edición 1338, 2025, ISSN 1757-8981
Editor: IOP Publishing
DOI: 10.1088/1757-899X/1338/1/012043/PDF

Mid-IR Supercontinuum Noise Reduction Using a Short Piece of Normal Dispersion Fiber - A General Mechanism

Autores: Rasmus Eilkœr Hansen, Callum Robertson Smith, Asbjørn Moltke, Christian Rosenberg Petersen, Sidharthan Raghuraman, Seongwoo Yoo, Ole Bang
Publicado en: Laser and Photonic Reviews, Edición Vol. 17 Iss. 6, 2023, ISSN 1863-8899
Editor: Wiley
DOI: 10.1002/lpor.202200776

Rapid non-destructive inspection of sub-surface defects in 3D printed alumina through 30 layers with 7 μm depth resolution

Autores: C. Lapre, D. Brouczek, M. Schwentenwein, K. Neumann, N. Benson, C.R. Petersen, O. Bang, N.M. Israelsen
Publicado en: Open Ceramics, Edición 18, 2024, ISSN 2666-5395
Editor: Elsevier BV
DOI: 10.1016/j.oceram.2024.100611

Non‐destructive and contactless defect detection inside leading edge coatings for wind turbine blades using mid‐infrared optical coherence tomography

Autores: Christian Rosenberg Petersen; Søren Fæster; Jakob Ilsted Bech; Kristine Munk Jespersen; Niels Møller Israelsen; Ole Bang
Publicado en: Wind Energy, Edición Vol. 26 Iss. 5, 2023, ISSN 1099-1824
Editor: Wiley
DOI: 10.1002/WE.2810

Reinforcement learning for synchronised flow control in a dual-gate resin infusion system

Autores: Miguel Camacho-Sánchez, Fernando García-Torres, Jesper John Lisegaard, Rocío del Amor, Sankhya Mohanty, Valery Naranjo
Publicado en: IOP Conference Series: Materials Science and Engineering, Edición 1338, 2025, ISSN 1757-8981
Editor: IOP Publishing
DOI: 10.1088/1757-899X/1338/1/012035/PDF

A Precise Prediction of the Chemical and Thermal Shrinkage during Curing of an Epoxy Resin

Autores: Jesper K. Jørgensen, Vincent K. Maes, Lars P. Mikkelsen, Tom L. Andersen
Publicado en: Polymers, Edición 16, 2024, ISSN 2073-4360
Editor: MDPI AG
DOI: 10.3390/polym16172435

Conference proceedings (22)

Looking into eggs by mid-infrared OCT for non-destructive inspection

Autores: Niels M. Israelsen, Rasmus E. Hansen, Coraline Lapre, Christian R. Petersen, Ole Bang
Publicado en: Photonics West 2024, 2024, ISSN 0277-786X
Editor: SPIE
DOI: 10.1117/12.2692629

Finite element simulation of the driving mechanisms for cure-induced wrinkles

Autores: Jørgensen, J. K., Mikkelsen, L. P., and Maes, V
Publicado en: ECCM 21, 2024
Editor: ECCM

Mid-Infrared All-spliced Cascaded Supercontinuum Generation

Autores: C.R. Petersen, O. Bang
Publicado en: CLEO Europe 2023, 2023, ISSN 2833-1052
Editor: Optica
DOI: 10.1109/CLEO/Europe-EQEC57999.2023.10231627

Online Tg estimation for blade manufacturing

Autores: Nikos Pantelelis
Publicado en: IOP Conf. Series, Edición 1293, 2023, ISSN 1757-899X
Editor: IOP
DOI: 10.1088/1757-899X/1293/1/012034

An efficient approach for mesoscale virtual permeability predictions using realistic fiber geometry extracted via micro-X-ray computed tomography

Autores: Debabrata Adhikari, Jesper John Lisegaard, Jesper Henri Hattel and Sankhya Mohanty
Publicado en: ECCM 21, 2024
Editor: ECCM

Quantifying Intra-tow Fiber Volume Fraction in GFRP: A comparison of 3D non-destructive X-ray computed tomography and destructive optical microscopy [Poster]

Autores: Jesper John Lisegaard, Debabrata Adhikari, Jesper Henri Hattel and Sankhya Mohanty
Publicado en: ECCM21, 2024
Editor: ECCM

Industrial Non-Destructive Inspection by Mid-Infrared Optical Coherence Tomography

Autores: Coraline Lapre, Christian Rosenberg Petersen, Ole Bang, Niels Møller Israelsen
Publicado en: 2025 Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC), 2025, ISSN 2833-1052
Editor: IEEE
DOI: 10.1109/CLEO/EUROPE-EQEC65582.2025.11109758

Compaction and fluid-structure interaction leading to fiber displacement in resin infusion of composite manufacturing

Autores: Debabrata Adhikari a, Jesper John Lisegaard a, Jesper Henri Hattel a, Sankhya Mohanty
Publicado en: 24th International Conference on Composite Materials (ICCM24), 2025, ISSN 3107-3166
DOI: 10.5281/ZENODO.18597133

Mid-IR supercontinuum noise reduction by SPM

Autores: R.E. Hansen, C.R. Smith, A.M. Moltke, C.R. Petersen, S. Raghuraman, S. Yoo, O. Bang
Publicado en: Photonics West 2024, 2024, ISSN 0277-786X
Editor: SPIE
DOI: 10.1117/12.3002332

Noise characterization of mid-infrared supercontinuum generated through gain-switched pumping

Autores: Callum R. Smith, Christian R. Petersen and Ole Bang
Publicado en: Photonics West 2024, 2024, ISSN 0277-786X
Editor: SPIE

Diode-Pumped MIR Supercontinuum

Autores: Smith, Callum Robertson
Publicado en: Danish Optical Society: National Optics Congress 2023, Edición Poster, 2022
Editor: Zenodo
DOI: 10.5281/ZENODO.7539438

Characterisation and in situ monitoring of epoxy thermoset curing for application in wind turbine blade

Autores: Jesper K. Jørgensen, Lars P. Mikkelsen, Tom L. Andersen
Publicado en: IOP Conf. Series, Edición 1293, 2023, ISSN 1757-899X
Editor: IOP
DOI: 10.1088/1757-899X/1293/1/012015

Supercontinuum noise reduction with short normal dispersion fibers – a simple and general technique

Autores: R.E. Hansen, C.R. Smith, A.M. Moltke, C.R. Petersen, S. Raghuraman, S. Yoo, O. Bang
Publicado en: Nonlinear Optics 2023, 2023, ISSN 1559-128X
Editor: Optica
DOI: 10.1364/NLO.2023.Tu3A.2

Non-destructive inspection by MIR OCT of sub-surface defects in 3D printed alumina

Autores: Coraline Lapre, Dominik Brouczek, Martin Schwentenwein, Kevin Neumann, Niels Benson, Christian Rosenberg Petersen, Ole Bang, Niels Møller Israelsen
Publicado en: Unconventional Optical Imaging IV, 2024, ISSN 0277-786X
Editor: SPIE
DOI: 10.1117/12.3029177

Lecture Notes in Computer Science

Autores: N. P. García-de-la-Puente, Rocío del Amor, Fernando García-Torres, Adrián Colomer & Valery Naranjo
Publicado en: IDEAL 2023, 2023, ISSN 0302-9743
Editor: Springer
DOI: 10.1007/978-3-031-48232-8_14

Non-destructive inspection of wind turbine blades with mid-infrared optical coherence tomography

Autores: Coraline Lapre, Christian R. Petersen, Per Nielsen, Thomas Wulf, Jakob Ilsted Bech, Søren Fæster, Niels M. Israelsen, Ole Bang
Publicado en: Photonics West 2024, 2024, ISSN 0277-786X
Editor: SPIE
DOI: 10.1117/12.2692638

Mid-infrared OCT for non-destructive sub-surface inspection and in-line production monitoring

Autores: C. Lapre, R.E. Hansen, C.R. Petersen, N.M. Israelsen, D. Brouczek, O. Bang
Publicado en: CLEO Europe 2023, 2023, ISSN 2833-1052
Editor: Optica

MIR Supercontinuum Using Gain-Switched and Modelocked Pumping

Autores: C.R. Smith, C.R. Petersen, O. Bang
Publicado en: CLEO Europe 2023, 2023, ISSN 2833-1052
Editor: Optica
DOI: 10.1109/CLEO/Europe-EQEC57999.2023.10232519

Cure-induced wrinkles and compression strength knock-down in uni-directional composites

Autores: Lars P. Mikkelsen, Jesper K. Jørgensen, Sérgio Costa
Publicado en: 24th International Conference on Composite Materials (ICCM24), 2025, ISSN 3107-3166
DOI: 10.5281/ZENODO.18596963

Challenges in permeability characterisation for modelling the manufacture of wind turbine blades

Autores: Robert S. Pierce
Publicado en: IOP Conf. Series, Edición 1293, 2023, ISSN 1757-899X
Editor: IOP
DOI: 10.1088/1757-899X/1293/1/012009

Intelligent process monitoring and control to reduce defects and cycle times in composites serial production

Autores: Nikos Pantelelis, Grégoire Lebreton
Publicado en: SAMPE 2026 Technical Proceedings, 2026, ISSN 1757-899X
Editor: Society for the Advancement of Material and Process Engineering
DOI: 10.5281/ZENODO.21888102

Unsupervised Defect Detection for Infrastructure Inspection

Autores: Pérez-García de la Puente, Natalia Lourdes; del Amor, Rocío; García-Torres, Fernando; Colomer, Adrián; Naranjo Ornedo, Valeriana
Publicado en: IDEAL 2023, 2023
Editor: Springer
DOI: 10.1007/978-3-031-48232-8_14