CORDIS proporciona enlaces a los documentos públicos y las publicaciones de los proyectos de los programas marco HORIZONTE.
Los enlaces a los documentos y las publicaciones de los proyectos del Séptimo Programa Marco, así como los enlaces a algunos tipos de resultados específicos, como conjuntos de datos y «software», se obtienen dinámicamente de OpenAIRE .
Resultado final
This deliverable will report a preliminary evaluation to define performance targets for the design parameters selected in tasks 2.3, i.e. exhaust gas CO2 concentration (hence EGR rate), max H2 or O2 available, H2 or O2 supply, to be used as inputs in WP2
Dissemination and communication plan (se abrirá en una nueva ventana)This deliverable reports the plan for the project dissemination and communication actions
Experimental assessment and performance of different burners tested in the DLR elevated pressure rig (se abrirá en una nueva ventana)This report will summarize the results obtained by DLR in Task 3.2 during high pressure (real engine conditions) tests on the EGR-optimzed burners released by BH in Task 3.1. Planned measurements are PIV, OH* chemiluminescence and OH-PLIF
"Research data management summary - Period#1" (se abrirá en una nueva ventana)"This report will summarize the open research data produced during period #1 pointing out the repository info and an inventory of the data sets published in line with the DMP."
Numerical CFD investigation for the selected engines at relevant conditions (se abrirá en una nueva ventana)This report will describe the results obtained by numerical CFD investigations of the physical mechanisms limiting EGR rates with the provision of possible technical solutions to extend the operability of the system with high EGR rates.
Experimental and numerical campaign at atmospheric conditions for the design optimization (se abrirá en una nueva ventana)This report will summarize the activities carried out in Task 2.3 related to experimental and numerical investigations at atmospheric pressure carried out by UNIFI and BH to carry out a first selection of the most promising innovative EGR optimized burners.
LES of the atmospheric rig (se abrirá en una nueva ventana)The new version of AVBP code developed in Task 3.3 will be here used by UNIFI and CERFACS for validation against the experimental results obtained by UNIFI in Task 2.3 (atmospheric pressure).
Scenarios for industrial application of NGCC with EGR (se abrirá en una nueva ventana)This Deliverable will outline scenarios for industrial application of the TRANSITION concept by the means of technical and economical evaluation of the overall integrated system natural gas combined cycle power plant with GTEGR advanced combustion and Post Combustion Carbon Capture
An optimized ARC chemical scheme to describe combustion and emissions production (se abrirá en una nueva ventana)Report describing the new modelling capabilities introduced in the AVBP code by CERFACS in Task 3.3. New main features will be the Analytically Reduced Mechanism and the multi-fuel capability.
Chemical kinetic and thermodynamic investigations (se abrirá en una nueva ventana)This report will describe the activities carried out in Task 2.1 related to Chemical Kinetics and Thermodynamic studies of EGR impact on Gas Turbine combustion process
"Research data management summary - Period#2" (se abrirá en una nueva ventana)"This report will summarize the open research data produced during period #2 pointing out the repository info and an inventory of the data sets published in line with the DMP."
Project website ready and online
Publicaciones
Autores:
S. Galeotti, A. Picchi, R. Becchi, R. Meloni, G. Babazzi, C. Romano, A. Andreini
Publicado en:
Applied Thermal Engineering, Edición 246, 2024, ISSN 1359-4311
Editor:
Elsevier BV
DOI:
10.1016/J.APPLTHERMALENG.2024.122943
Autores:
G. Lemmi, S. Castellani, P.C. Nassini, A. Picchi, S. Galeotti, R. Becchi, A. Andreini, G. Babazzi, R. Meloni
Publicado en:
Fuel Communications, Edición 19, 2025, ISSN 2666-0520
Editor:
Elsevier BV
DOI:
10.1016/J.JFUECO.2024.100117
Autores:
Simone Castellani, Gianmarco Lemmi, Pier Carlo Nassini, Roberto Meloni, Antonio Andreini
Publicado en:
Combustion and Flame, Edición 276, 2025, ISSN 0010-2180
Editor:
Elsevier BV
DOI:
10.1016/J.COMBUSTFLAME.2025.114128
Autores:
Gianmarco Lemmi, Simone Castellani, Roberto Meloni, Sofia Galeotti, Antonio Andreini
Publicado en:
Applications in Energy and Combustion Science, Edición 23, 2025, ISSN 2666-352X
Editor:
Elsevier BV
DOI:
10.1016/J.JAECS.2025.100356
Autores:
Lemmi, Gianmarco; Castellani, Simone; Galeotti, Sofia; PICCHI, ALESSIO; Becchi, Riccardo; Andreini, Antonio; babazzi, giulia; Meloni, Roberto Meloni
Publicado en:
46th Meeting of The Italian Section of The Combustion Institute, 2024
Editor:
The Italian Section of The Combustion Institute
DOI:
10.5281/ZENODO.15432392
Autores:
Galeotti, Sofia; PICCHI, ALESSIO; Becchi, Riccardo; Lemmi, Gianmarco; Meloni, Roberto Meloni; babazzi, giulia; Andreini, Antonio
Publicado en:
46th Meeting of the Italian Section of The Combustion Institute (ASICI), 2024
Editor:
The Italian Section of The Combustion Institute
DOI:
10.5281/ZENODO.15431702
Autores:
G. Lemmi; P.C. Nassini; S. Castellani; A. Picchi; S. Galeotti; R. Becchi; A. Andreini; G. Babazzi; R. Meloni
Publicado en:
Joint Meeting of the Belgian and Italian Sections of The Combustion Institute - 45th Meeting of the Italian Section of The Combustion Institute, 2023
DOI:
10.5281/ZENODO.8063146
Autores:
S. Galeotti; A. Picchi; R. Becchi; R. Meloni; G. Babazzi; C. Romano; A. Andreini
Publicado en:
Joint Meeting of the Belgian and Italian Sections of The Combustion Institute - 45th Meeting of the Italian Section of The Combustion Institute, 2023, ISBN 978-88-88104-27-0
Editor:
ASICI
DOI:
10.5281/zenodo.8069906
Buscando datos de OpenAIRE...
Se ha producido un error en la búsqueda de datos de OpenAIRE
No hay resultados disponibles