CORDIS fournit des liens vers les livrables publics et les publications des projets HORIZON.
Les liens vers les livrables et les publications des projets du 7e PC, ainsi que les liens vers certains types de résultats spécifiques tels que les jeux de données et les logiciels, sont récupérés dynamiquement sur OpenAIRE .
Livrables
This deliverable will report a preliminary evaluation to define performance targets for the design parameters selected in tasks 2.3, i.e. exhaust gas CO2 concentration (hence EGR rate), max H2 or O2 available, H2 or O2 supply, to be used as inputs in WP2
Dissemination and communication plan (s’ouvre dans une nouvelle fenêtre)This deliverable reports the plan for the project dissemination and communication actions
Experimental assessment and performance of different burners tested in the DLR elevated pressure rig (s’ouvre dans une nouvelle fenêtre)This report will summarize the results obtained by DLR in Task 3.2 during high pressure (real engine conditions) tests on the EGR-optimzed burners released by BH in Task 3.1. Planned measurements are PIV, OH* chemiluminescence and OH-PLIF
"Research data management summary - Period#1" (s’ouvre dans une nouvelle fenêtre)"This report will summarize the open research data produced during period #1 pointing out the repository info and an inventory of the data sets published in line with the DMP."
Numerical CFD investigation for the selected engines at relevant conditions (s’ouvre dans une nouvelle fenêtre)This report will describe the results obtained by numerical CFD investigations of the physical mechanisms limiting EGR rates with the provision of possible technical solutions to extend the operability of the system with high EGR rates.
Experimental and numerical campaign at atmospheric conditions for the design optimization (s’ouvre dans une nouvelle fenêtre)This report will summarize the activities carried out in Task 2.3 related to experimental and numerical investigations at atmospheric pressure carried out by UNIFI and BH to carry out a first selection of the most promising innovative EGR optimized burners.
LES of the atmospheric rig (s’ouvre dans une nouvelle fenêtre)The new version of AVBP code developed in Task 3.3 will be here used by UNIFI and CERFACS for validation against the experimental results obtained by UNIFI in Task 2.3 (atmospheric pressure).
Scenarios for industrial application of NGCC with EGR (s’ouvre dans une nouvelle fenêtre)This Deliverable will outline scenarios for industrial application of the TRANSITION concept by the means of technical and economical evaluation of the overall integrated system natural gas combined cycle power plant with GTEGR advanced combustion and Post Combustion Carbon Capture
An optimized ARC chemical scheme to describe combustion and emissions production (s’ouvre dans une nouvelle fenêtre)Report describing the new modelling capabilities introduced in the AVBP code by CERFACS in Task 3.3. New main features will be the Analytically Reduced Mechanism and the multi-fuel capability.
Chemical kinetic and thermodynamic investigations (s’ouvre dans une nouvelle fenêtre)This report will describe the activities carried out in Task 2.1 related to Chemical Kinetics and Thermodynamic studies of EGR impact on Gas Turbine combustion process
"Research data management summary - Period#2" (s’ouvre dans une nouvelle fenêtre)"This report will summarize the open research data produced during period #2 pointing out the repository info and an inventory of the data sets published in line with the DMP."
Project website ready and online
Publications
Auteurs:
S. Galeotti, A. Picchi, R. Becchi, R. Meloni, G. Babazzi, C. Romano, A. Andreini
Publié dans:
Applied Thermal Engineering, Numéro 246, 2024, ISSN 1359-4311
Éditeur:
Elsevier BV
DOI:
10.1016/J.APPLTHERMALENG.2024.122943
Auteurs:
G. Lemmi, S. Castellani, P.C. Nassini, A. Picchi, S. Galeotti, R. Becchi, A. Andreini, G. Babazzi, R. Meloni
Publié dans:
Fuel Communications, Numéro 19, 2025, ISSN 2666-0520
Éditeur:
Elsevier BV
DOI:
10.1016/J.JFUECO.2024.100117
Auteurs:
Simone Castellani, Gianmarco Lemmi, Pier Carlo Nassini, Roberto Meloni, Antonio Andreini
Publié dans:
Combustion and Flame, Numéro 276, 2025, ISSN 0010-2180
Éditeur:
Elsevier BV
DOI:
10.1016/J.COMBUSTFLAME.2025.114128
Auteurs:
Gianmarco Lemmi, Simone Castellani, Roberto Meloni, Sofia Galeotti, Antonio Andreini
Publié dans:
Applications in Energy and Combustion Science, Numéro 23, 2025, ISSN 2666-352X
Éditeur:
Elsevier BV
DOI:
10.1016/J.JAECS.2025.100356
Auteurs:
Lemmi, Gianmarco; Castellani, Simone; Galeotti, Sofia; PICCHI, ALESSIO; Becchi, Riccardo; Andreini, Antonio; babazzi, giulia; Meloni, Roberto Meloni
Publié dans:
46th Meeting of The Italian Section of The Combustion Institute, 2024
Éditeur:
The Italian Section of The Combustion Institute
DOI:
10.5281/ZENODO.15432392
Auteurs:
Galeotti, Sofia; PICCHI, ALESSIO; Becchi, Riccardo; Lemmi, Gianmarco; Meloni, Roberto Meloni; babazzi, giulia; Andreini, Antonio
Publié dans:
46th Meeting of the Italian Section of The Combustion Institute (ASICI), 2024
Éditeur:
The Italian Section of The Combustion Institute
DOI:
10.5281/ZENODO.15431702
Auteurs:
G. Lemmi; P.C. Nassini; S. Castellani; A. Picchi; S. Galeotti; R. Becchi; A. Andreini; G. Babazzi; R. Meloni
Publié dans:
Joint Meeting of the Belgian and Italian Sections of The Combustion Institute - 45th Meeting of the Italian Section of The Combustion Institute, 2023
DOI:
10.5281/ZENODO.8063146
Auteurs:
S. Galeotti; A. Picchi; R. Becchi; R. Meloni; G. Babazzi; C. Romano; A. Andreini
Publié dans:
Joint Meeting of the Belgian and Italian Sections of The Combustion Institute - 45th Meeting of the Italian Section of The Combustion Institute, 2023, ISBN 978-88-88104-27-0
Éditeur:
ASICI
DOI:
10.5281/zenodo.8069906
Recherche de données OpenAIRE...
Une erreur s’est produite lors de la recherche de données OpenAIRE
Aucun résultat disponible