PUlsed Laser depoSition tEchnology for soLid State battery manufacturIng supported by digitalizatiON

Información del proyecto

PULSELiON

Identificador del acuerdo de subvención: 101069686

DOI

10.3030/101069686

Fecha de la firma de la CE 8 Junio 2022

Fecha de inicio 1 Septiembre 2022

Fecha de finalización 31 Agosto 2026

Financiado con arreglo a

• Climate, Energy and Mobility

Coste total

€ 6 998 543,00

Aportación de la UE

€ 6 998 543,00

Coordinado por

RISE RESEARCH INSTITUTES OF SWEDEN AB
Sweden

CORDIS proporciona enlaces a los documentos públicos y las publicaciones de los proyectos de los programas marco HORIZONTE.

Los enlaces a los documentos y las publicaciones de los proyectos del Séptimo Programa Marco, así como los enlaces a algunos tipos de resultados específicos, como conjuntos de datos y «software», se obtienen dinámicamente de OpenAIRE .

Resultado final

Documents, reports (2)

Dissemination plan and activities

This deliverable corresponds to task 8.2. D8.1 delivers the scientific dissemination plan, coordinating the scientific dissemination activities of the full consortium. TC will coordinate the preparation of the dissemination plan, while all partners will support TC by undertaking scientific dissemination activities. A preliminary dissemination plan will be presented in M6, which will be subsequently updated and finalized in M48.

Communication Plan

This deliverable corresponds to task 8.3. A communication plan will be developed in M9. The plan will outline a strategy to liaise with the most relevant stakeholders. Alongwith general dissemination, this will include high impact communication with 10+ relevant stakeholders in the battery/recycling and policy makers in at least 3 member states.

Publicaciones

Peer reviewed articles (25)

All-solid-state lithium batteries with NMC₉₅₅ cathodes: PVDF-free formulation with SBR and capacity recovery insights

Autores: Beatriz M. Gomes, Manuela C. Baptista, Ander Orue, Bhattacharjya Dhrubajyoti, Sylwia Terlicka, Peter Sjövall, Nico Zamperlin, Carlos Fonseca, Jasmin Smajic, Ville Kekkonen, Willar Vonk, Artur Tron, Andy Schena, Anwar Ahniyaz, Maria Helena Braga
Publicado en: Energy Materials, Edición 5, 2025, ISSN 2770-5900
Editor: OAE Publishing Inc.
DOI: 10.20517/ENERGYMATER.2024.297

A hybrid modelling approach coupling physics-based simulation and deep learning for battery electrode manufacturing simulations

Autores: Utkarsh Vijay, Diego E. Galvez-Aranda, Franco M. Zanotto, Tan Le-Dinh, Mohammed Alabdali, Mark Asch, Alejandro A. Franco
Publicado en: Energy Storage Materials, Edición 75, 2024, ISSN 2405-8297
Editor: Elsevier BV
DOI: 10.1016/J.ENSM.2024.103883

The ARTISTIC Battery Manufacturing Digitalization Initiative: From Fundamental Research to Industrialization

Autores: Javier F. Troncoso, Franco M. Zanotto, Diego E. Galvez‐Aranda, Diana Zapata Dominguez, Lucie Denisart, Alejandro A. Franco
Publicado en: Batteries & Supercaps, Edición 8, 2024, ISSN 2566-6223
Editor: Wiley
DOI: 10.1002/BATT.202400385

Mesoscopic Model of Extrusion during Solvent‐Free Lithium‐ion Battery Electrode Manufacturing**

Autores: Brayan Paredes‐Goyes, Franco M. Zanotto, Victor Boudeville, Sylvie Grugeon, Loic Dupont, Alejandro A. Franco
Publicado en: Batteries & Supercaps, Edición 7, 2023, ISSN 2566-6223
Editor: Wiley
DOI: 10.1002/BATT.202300441

Three-dimensional physical modeling of the wet manufacturing process of solid-state battery electrodes

Autores: Mohammed Alabdali; Franco M. Zanotto; Marc Duquesnoy; Anna-Katharina Hatz; Duancheng Ma; Jérémie Auvergniot; Virginie Viallet;Vincent Seznec; Alejandro A. FRANCO
Publicado en: Journal of Power Sources, Edición Volume 580 1 Oct 2023, 2023, ISSN 0378-7753
Editor: Elsevier
DOI: 10.1016/j.jpowsour.2023.233427

Advanced manufacturing of thin-film lithium metal anode by pulsed-laser deposition for next-generation solid-state batteries

Autores: Nico Zamperlin, Rosalía Cid, Ville Kekkonen, Arianna Pesce, Manar Cheddadi, Beatriz M. Gomes, Manuela C. Baptista, M. Helena Braga, Ander Orue, Pedro López-Aranguren
Publicado en: Journal of Power Sources, Edición 655, 2025, ISSN 1873-2755
Editor: Elsevier BV
DOI: 10.1016/J.JPOWSOUR.2025.237986

Cost‐Effective Solutions for Lithium‐Ion Battery Manufacturing: Comparative Analysis of Olefine and Rubber‐Based Alternative Binders for High‐Energy Ni‐Rich NCM Cathodes

Autores: Susan Montes; Alexander Beutl; Andrea Paolella; Marcus Jahn; Artur Tron
Publicado en: ChemElectroChem, 2024, ISSN 2196-0216
Editor: Wiley
DOI: 10.1002/CELC.202400465

Understanding mechanical stresses upon solid-state battery electrode cycling using discrete element method

Autores: Mohammed Alabdali, Franco M. Zanotto, Mehdi Chouchane, Alain C. Ngandjong, Virginie Viallet, Vincent Seznec, Ying Shirley Meng, Alejandro A. Franco
Publicado en: Energy Storage Materials, Edición 70, 2024, ISSN 2405-8297
Editor: Elsevier BV
DOI: 10.1016/J.ENSM.2024.103527

Probing the chemical stability between current collectors and argyrodite Li6PS5Cl sulfide electrolyte

Autores: Artur Tron, Alexander Beutl, Irshad Mohammad, Andrea Paolella
Publicado en: Communications Chemistry, Edición 8, 2025, ISSN 2399-3669
Editor: Springer Science and Business Media LLC
DOI: 10.1038/S42004-025-01609-9

Integration of lithium-ion battery recycling into manufacturing through digitalization: A perspective

Autores: Imelda Cardenas-Sierra, Utkarsh Vijay, Frederic Aguesse, Néstor Antuñano, Elixabete Ayerbe, Lukas Gold, Aleksandra Naumann, Laida Otaegui, Nadir Recham, Simon Stier, Sandro Süß, Lalitha Subramanian, Nicolas Vallin, Gabriela Ventura Silva, Nicolas Von Drachenfels, Dennis Weitze, Alejandro A. Franco
Publicado en: Journal of Power Sources, Edición 631, 2025, ISSN 0378-7753
Editor: Elsevier BV
DOI: 10.1016/J.JPOWSOUR.2024.236158

Carbon-binder-domain porosity extraction through lithium-ion battery electrode impedance data

Autores: Sergio Pinilla, Franco M. Zanotto, Diana Zapata Dominguez, Tomás García, Alejandro A. Franco
Publicado en: Energy Storage Materials, Edición 74, 2024, ISSN 2405-8297
Editor: Elsevier BV
DOI: 10.1016/J.ENSM.2024.103818

Influence of the mixing speed in the rheology of NMC622-based Li-ion battery electrode slurries

Autores: Diana Zapata Dominguez, Jiahui Xu, Yasmina Boudjema, Siwar Ben Hadj Ali, Franco M. Zanotto, Alejandro A. Franco
Publicado en: Journal of Power Sources Advances, Edición volume 26, April 2024, 100141, 2024, ISSN 2666-2485
Editor: Elsevier
DOI: 10.1016/j.powera.2024.100141

Round‐robin test of all‐solid‐state battery with sulfide electrolyte assembly in coin‐type cell configuration

Autores: Alexander Beutl, Ander Orue, Pedro López‐Aranguren, Andrea Itziar Pitillas Martinez, Maria Helena Braga, Ville Kekkonen, Artur Tron
Publicado en: Electrochemical Science Advances, Edición 4, 2024, ISSN 2698-5977
Editor: Wiley
DOI: 10.1002/ELSA.202400004

Time‐Dependent Deep Learning Manufacturing Process Model for Battery Electrode Microstructure Prediction

Autores: Diego E. Galvez‐Aranda, Tan Le Dinh, Utkarsh Vijay, Franco M. Zanotto, Alejandro A. Franco
Publicado en: Advanced Energy Materials, Edición 14, 2024, ISSN 1614-6840
Editor: Wiley
DOI: 10.1002/AENM.202400376

Polaronic and Electrochemical Signatures in Group IVB (Ti, Zr, Hf) Oxides: Unified SKP–DFT Insights for Tunable Transport in Energy and Electronic Devices

Autores: Beatriz Moura Gomes, Júlia Holtz, Maria Luís Pinto, Maria Helena Braga
Publicado en: Advanced Functional Materials, 2025, ISSN 1616-301X
Editor: Wiley
DOI: 10.1002/ADFM.202509853

2024 roadmap for sustainable batteries

Autores: Magda Titirici, Patrik Johansson, Maria Crespo Ribadeneyra, Heather Au, Alessandro Innocenti, Stefano Passerini, Evi Petavratzi, Paul Lusty, Annika Ahlberg Tidblad, Andrew J Naylor, Reza Younesi, Yvonne A Chart, Jack Aspinall, Mauro Pasta, Joseba Orive, Lakshmipriya Musuvadhi Babulal, Marine Reynaud, Kenneth G Latham, Tomooki Hosaka, Shinichi Komaba, Jan Bitenc, Alexandre Ponrouch, Heng Zhang, Michel Armand, Robert Kerr, Patrick C Howlett, Maria Forsyth, John Brown, Alexis Grimaud, Marja Vilkman, Kamil Burak Dermenci, Seyedabolfazl Mousavihashemi, Maitane Berecibar, Jean E Marshall, Con Robert McElroy, Emma Kendrick, Tayeba Safdar, Chun Huang, Franco M Zanotto, Javier F Troncoso, Diana Zapata Dominguez, Mohammed Alabdali, Utkarsh Vijay, Alejandro A Franco, Sivaraj Pazhaniswamy, Patrick S Grant, Stiven López Guzman, Marcus Fehse, Montserrat Galceran, Néstor Antuñano
Publicado en: Journal of Physics: Energy, Edición 6, 2024, ISSN 2515-7655
Editor: IOP Publishing
DOI: 10.1088/2515-7655/AD6BC0

Enhanced Porous Electrode Theory Based Electrochemical Model for Higher Fidelity Modelling and Deciphering of the EIS Spectra

Autores: Igor Mele, Klemen Zelič, Marko Firm, Jože Moškon, Miran Gaberšček, Tomaž Katrašnik
Publicado en: Journal of The Electrochemical Society, Edición 171, 2024, ISSN 1945-7111
Editor: IOP Science
DOI: 10.1149/1945-7111/AD6EB9

Critical Current Density Measurements of Argyrodite Li6PS5Cl Solid Electrolyte at Ambient Pressure

Autores: Artur Tron, Ander Orue, Pedro López-Aranguren, Alexander Beutl
Publicado en: Journal of The Electrochemical Society, Edición Volume 170, Number 10, 2023, ISSN 1945-7111
Editor: IOP Science
DOI: 10.1149/1945-7111/ad01e3

Simulating solid-state battery cathode manufacturing via wet-processing with resolved active material geometries

Autores: Dennis Weitze, Franco M. Zanotto, Diana Zapata Dominguez, Alejandro A. Franco
Publicado en: Energy Storage Materials, Edición 73, 2024, ISSN 2405-8297
Editor: Elsevier BV
DOI: 10.1016/J.ENSM.2024.103747

A computational workflow for the simulation of solid state battery electrodes from manufacturing to electrochemical performance

Autores: Siwar Ben Hadj Ali, Mohammed Alabdali, Virginie Viallet, Vincent Seznec, Alejandro A. Franco
Publicado en: Journal of Power Sources, Edición 630, 2025, ISSN 0378-7753
Editor: Elsevier BV
DOI: 10.1016/J.JPOWSOUR.2024.236131

Nickel-Rich Cathodes for Solid-State Lithium Batteries: Comparative Study Between PVA and PIB Binders

Autores: José M. Pinheiro, Beatriz Moura Gomes, Manuela C. Baptista, M. Helena Braga
Publicado en: Molecules, Edición 30, 2025, ISSN 1420-3049
Editor: MDPI AG
DOI: 10.3390/MOLECULES30142974

Journal of Materials Chemistry A

Autores: Beatriz M. Gomes, J. Francisco Moutinho, M. Helena Braga
Publicado en: Journal of Materials Chemistry A, Edición Journal Materials Chemistry, 2024, 12, 690–722, 2023, ISSN 2050-7488
Editor: RSC
DOI: 10.1039/d3ta04228f

Experimental and Computational Analysis of Slurry‐Based Manufacturing of Solid‐State Battery Composite Cathode

Autores: Mohammed Alabdali, Franco M. Zanotto, Benoît Notredame, Virginie Viallet, Vincent Seznec, Alejandro A. Franco
Publicado en: Batteries & Supercaps, Edición 8, 2025, ISSN 2566-6223
Editor: Wiley
DOI: 10.1002/BATT.202400709

Machine learning-driven optimization of gas diffusion layer microstructure for PEM fuel cells

Autores: Rashen Lou Omongos, Diego E. Galvez-Aranda, Franco M. Zanotto, András Vernes, Alejandro A. Franco
Publicado en: Journal of Power Sources, Edición 625, 2025, ISSN 0378-7753
Editor: Elsevier BV
DOI: 10.1016/J.JPOWSOUR.2024.235583

Cathodes pinpoints for the next generation of energy storage devices: the LiFePO4 case study

Autores: Beatriz Arouca Maia, Beatriz Moura Gomes, Antonio Nuno Guerreiro, Raquel Miriam Santos and Maria Helena Braga
Publicado en: Journal of Physics: Materials, Edición volume 7, number 2, 2024, ISSN 2515-7639
Editor: IOP Science
DOI: 10.1088/2515-7639/ad218c