PUlsed Laser depoSition tEchnology for soLid State battery manufacturIng supported by digitalizatiON

Informazioni relative al progetto

PULSELiON

ID dell’accordo di sovvenzione: 101069686

DOI

10.3030/101069686

Data della firma CE 8 Giugno 2022

Data di avvio 1 Settembre 2022

Data di completamento 31 Agosto 2026

Finanziato da

• Climate, Energy and Mobility

Costo totale

€ 6 998 543,00

Contributo UE

€ 6 998 543,00

Coordinato da

RISE RESEARCH INSTITUTES OF SWEDEN AB
Sweden

CORDIS fornisce collegamenti ai risultati finali pubblici e alle pubblicazioni dei progetti ORIZZONTE.

I link ai risultati e alle pubblicazioni dei progetti del 7° PQ, così come i link ad alcuni tipi di risultati specifici come dataset e software, sono recuperati dinamicamente da .OpenAIRE .

Risultati finali

Documents, reports (2)

Dissemination plan and activities

This deliverable corresponds to task 8.2. D8.1 delivers the scientific dissemination plan, coordinating the scientific dissemination activities of the full consortium. TC will coordinate the preparation of the dissemination plan, while all partners will support TC by undertaking scientific dissemination activities. A preliminary dissemination plan will be presented in M6, which will be subsequently updated and finalized in M48.

Communication Plan

This deliverable corresponds to task 8.3. A communication plan will be developed in M9. The plan will outline a strategy to liaise with the most relevant stakeholders. Alongwith general dissemination, this will include high impact communication with 10+ relevant stakeholders in the battery/recycling and policy makers in at least 3 member states.

Pubblicazioni

Peer reviewed articles (25)

All-solid-state lithium batteries with NMC₉₅₅ cathodes: PVDF-free formulation with SBR and capacity recovery insights

Autori: Beatriz M. Gomes, Manuela C. Baptista, Ander Orue, Bhattacharjya Dhrubajyoti, Sylwia Terlicka, Peter Sjövall, Nico Zamperlin, Carlos Fonseca, Jasmin Smajic, Ville Kekkonen, Willar Vonk, Artur Tron, Andy Schena, Anwar Ahniyaz, Maria Helena Braga
Pubblicato in: Energy Materials, Numero 5, 2025, ISSN 2770-5900
Editore: OAE Publishing Inc.
DOI: 10.20517/ENERGYMATER.2024.297

A hybrid modelling approach coupling physics-based simulation and deep learning for battery electrode manufacturing simulations

Autori: Utkarsh Vijay, Diego E. Galvez-Aranda, Franco M. Zanotto, Tan Le-Dinh, Mohammed Alabdali, Mark Asch, Alejandro A. Franco
Pubblicato in: Energy Storage Materials, Numero 75, 2024, ISSN 2405-8297
Editore: Elsevier BV
DOI: 10.1016/J.ENSM.2024.103883

The ARTISTIC Battery Manufacturing Digitalization Initiative: From Fundamental Research to Industrialization

Autori: Javier F. Troncoso, Franco M. Zanotto, Diego E. Galvez‐Aranda, Diana Zapata Dominguez, Lucie Denisart, Alejandro A. Franco
Pubblicato in: Batteries & Supercaps, Numero 8, 2024, ISSN 2566-6223
Editore: Wiley
DOI: 10.1002/BATT.202400385

Mesoscopic Model of Extrusion during Solvent‐Free Lithium‐ion Battery Electrode Manufacturing**

Autori: Brayan Paredes‐Goyes, Franco M. Zanotto, Victor Boudeville, Sylvie Grugeon, Loic Dupont, Alejandro A. Franco
Pubblicato in: Batteries & Supercaps, Numero 7, 2023, ISSN 2566-6223
Editore: Wiley
DOI: 10.1002/BATT.202300441

Three-dimensional physical modeling of the wet manufacturing process of solid-state battery electrodes

Autori: Mohammed Alabdali; Franco M. Zanotto; Marc Duquesnoy; Anna-Katharina Hatz; Duancheng Ma; Jérémie Auvergniot; Virginie Viallet;Vincent Seznec; Alejandro A. FRANCO
Pubblicato in: Journal of Power Sources, Numero Volume 580 1 Oct 2023, 2023, ISSN 0378-7753
Editore: Elsevier
DOI: 10.1016/j.jpowsour.2023.233427

Advanced manufacturing of thin-film lithium metal anode by pulsed-laser deposition for next-generation solid-state batteries

Autori: Nico Zamperlin, Rosalía Cid, Ville Kekkonen, Arianna Pesce, Manar Cheddadi, Beatriz M. Gomes, Manuela C. Baptista, M. Helena Braga, Ander Orue, Pedro López-Aranguren
Pubblicato in: Journal of Power Sources, Numero 655, 2025, ISSN 1873-2755
Editore: Elsevier BV
DOI: 10.1016/J.JPOWSOUR.2025.237986

Cost‐Effective Solutions for Lithium‐Ion Battery Manufacturing: Comparative Analysis of Olefine and Rubber‐Based Alternative Binders for High‐Energy Ni‐Rich NCM Cathodes

Autori: Susan Montes; Alexander Beutl; Andrea Paolella; Marcus Jahn; Artur Tron
Pubblicato in: ChemElectroChem, 2024, ISSN 2196-0216
Editore: Wiley
DOI: 10.1002/CELC.202400465

Understanding mechanical stresses upon solid-state battery electrode cycling using discrete element method

Autori: Mohammed Alabdali, Franco M. Zanotto, Mehdi Chouchane, Alain C. Ngandjong, Virginie Viallet, Vincent Seznec, Ying Shirley Meng, Alejandro A. Franco
Pubblicato in: Energy Storage Materials, Numero 70, 2024, ISSN 2405-8297
Editore: Elsevier BV
DOI: 10.1016/J.ENSM.2024.103527

Probing the chemical stability between current collectors and argyrodite Li6PS5Cl sulfide electrolyte

Autori: Artur Tron, Alexander Beutl, Irshad Mohammad, Andrea Paolella
Pubblicato in: Communications Chemistry, Numero 8, 2025, ISSN 2399-3669
Editore: Springer Science and Business Media LLC
DOI: 10.1038/S42004-025-01609-9

Integration of lithium-ion battery recycling into manufacturing through digitalization: A perspective

Autori: Imelda Cardenas-Sierra, Utkarsh Vijay, Frederic Aguesse, Néstor Antuñano, Elixabete Ayerbe, Lukas Gold, Aleksandra Naumann, Laida Otaegui, Nadir Recham, Simon Stier, Sandro Süß, Lalitha Subramanian, Nicolas Vallin, Gabriela Ventura Silva, Nicolas Von Drachenfels, Dennis Weitze, Alejandro A. Franco
Pubblicato in: Journal of Power Sources, Numero 631, 2025, ISSN 0378-7753
Editore: Elsevier BV
DOI: 10.1016/J.JPOWSOUR.2024.236158

Carbon-binder-domain porosity extraction through lithium-ion battery electrode impedance data

Autori: Sergio Pinilla, Franco M. Zanotto, Diana Zapata Dominguez, Tomás García, Alejandro A. Franco
Pubblicato in: Energy Storage Materials, Numero 74, 2024, ISSN 2405-8297
Editore: Elsevier BV
DOI: 10.1016/J.ENSM.2024.103818

Influence of the mixing speed in the rheology of NMC622-based Li-ion battery electrode slurries

Autori: Diana Zapata Dominguez, Jiahui Xu, Yasmina Boudjema, Siwar Ben Hadj Ali, Franco M. Zanotto, Alejandro A. Franco
Pubblicato in: Journal of Power Sources Advances, Numero volume 26, April 2024, 100141, 2024, ISSN 2666-2485
Editore: Elsevier
DOI: 10.1016/j.powera.2024.100141

Round‐robin test of all‐solid‐state battery with sulfide electrolyte assembly in coin‐type cell configuration

Autori: Alexander Beutl, Ander Orue, Pedro López‐Aranguren, Andrea Itziar Pitillas Martinez, Maria Helena Braga, Ville Kekkonen, Artur Tron
Pubblicato in: Electrochemical Science Advances, Numero 4, 2024, ISSN 2698-5977
Editore: Wiley
DOI: 10.1002/ELSA.202400004

Time‐Dependent Deep Learning Manufacturing Process Model for Battery Electrode Microstructure Prediction

Autori: Diego E. Galvez‐Aranda, Tan Le Dinh, Utkarsh Vijay, Franco M. Zanotto, Alejandro A. Franco
Pubblicato in: Advanced Energy Materials, Numero 14, 2024, ISSN 1614-6840
Editore: Wiley
DOI: 10.1002/AENM.202400376

Polaronic and Electrochemical Signatures in Group IVB (Ti, Zr, Hf) Oxides: Unified SKP–DFT Insights for Tunable Transport in Energy and Electronic Devices

Autori: Beatriz Moura Gomes, Júlia Holtz, Maria Luís Pinto, Maria Helena Braga
Pubblicato in: Advanced Functional Materials, 2025, ISSN 1616-301X
Editore: Wiley
DOI: 10.1002/ADFM.202509853

2024 roadmap for sustainable batteries

Autori: Magda Titirici, Patrik Johansson, Maria Crespo Ribadeneyra, Heather Au, Alessandro Innocenti, Stefano Passerini, Evi Petavratzi, Paul Lusty, Annika Ahlberg Tidblad, Andrew J Naylor, Reza Younesi, Yvonne A Chart, Jack Aspinall, Mauro Pasta, Joseba Orive, Lakshmipriya Musuvadhi Babulal, Marine Reynaud, Kenneth G Latham, Tomooki Hosaka, Shinichi Komaba, Jan Bitenc, Alexandre Ponrouch, Heng Zhang, Michel Armand, Robert Kerr, Patrick C Howlett, Maria Forsyth, John Brown, Alexis Grimaud, Marja Vilkman, Kamil Burak Dermenci, Seyedabolfazl Mousavihashemi, Maitane Berecibar, Jean E Marshall, Con Robert McElroy, Emma Kendrick, Tayeba Safdar, Chun Huang, Franco M Zanotto, Javier F Troncoso, Diana Zapata Dominguez, Mohammed Alabdali, Utkarsh Vijay, Alejandro A Franco, Sivaraj Pazhaniswamy, Patrick S Grant, Stiven López Guzman, Marcus Fehse, Montserrat Galceran, Néstor Antuñano
Pubblicato in: Journal of Physics: Energy, Numero 6, 2024, ISSN 2515-7655
Editore: IOP Publishing
DOI: 10.1088/2515-7655/AD6BC0

Enhanced Porous Electrode Theory Based Electrochemical Model for Higher Fidelity Modelling and Deciphering of the EIS Spectra

Autori: Igor Mele, Klemen Zelič, Marko Firm, Jože Moškon, Miran Gaberšček, Tomaž Katrašnik
Pubblicato in: Journal of The Electrochemical Society, Numero 171, 2024, ISSN 1945-7111
Editore: IOP Science
DOI: 10.1149/1945-7111/AD6EB9

Critical Current Density Measurements of Argyrodite Li6PS5Cl Solid Electrolyte at Ambient Pressure

Autori: Artur Tron, Ander Orue, Pedro López-Aranguren, Alexander Beutl
Pubblicato in: Journal of The Electrochemical Society, Numero Volume 170, Number 10, 2023, ISSN 1945-7111
Editore: IOP Science
DOI: 10.1149/1945-7111/ad01e3

Simulating solid-state battery cathode manufacturing via wet-processing with resolved active material geometries

Autori: Dennis Weitze, Franco M. Zanotto, Diana Zapata Dominguez, Alejandro A. Franco
Pubblicato in: Energy Storage Materials, Numero 73, 2024, ISSN 2405-8297
Editore: Elsevier BV
DOI: 10.1016/J.ENSM.2024.103747

A computational workflow for the simulation of solid state battery electrodes from manufacturing to electrochemical performance

Autori: Siwar Ben Hadj Ali, Mohammed Alabdali, Virginie Viallet, Vincent Seznec, Alejandro A. Franco
Pubblicato in: Journal of Power Sources, Numero 630, 2025, ISSN 0378-7753
Editore: Elsevier BV
DOI: 10.1016/J.JPOWSOUR.2024.236131

Nickel-Rich Cathodes for Solid-State Lithium Batteries: Comparative Study Between PVA and PIB Binders

Autori: José M. Pinheiro, Beatriz Moura Gomes, Manuela C. Baptista, M. Helena Braga
Pubblicato in: Molecules, Numero 30, 2025, ISSN 1420-3049
Editore: MDPI AG
DOI: 10.3390/MOLECULES30142974

Journal of Materials Chemistry A

Autori: Beatriz M. Gomes, J. Francisco Moutinho, M. Helena Braga
Pubblicato in: Journal of Materials Chemistry A, Numero Journal Materials Chemistry, 2024, 12, 690–722, 2023, ISSN 2050-7488
Editore: RSC
DOI: 10.1039/d3ta04228f

Experimental and Computational Analysis of Slurry‐Based Manufacturing of Solid‐State Battery Composite Cathode

Autori: Mohammed Alabdali, Franco M. Zanotto, Benoît Notredame, Virginie Viallet, Vincent Seznec, Alejandro A. Franco
Pubblicato in: Batteries & Supercaps, Numero 8, 2025, ISSN 2566-6223
Editore: Wiley
DOI: 10.1002/BATT.202400709

Machine learning-driven optimization of gas diffusion layer microstructure for PEM fuel cells

Autori: Rashen Lou Omongos, Diego E. Galvez-Aranda, Franco M. Zanotto, András Vernes, Alejandro A. Franco
Pubblicato in: Journal of Power Sources, Numero 625, 2025, ISSN 0378-7753
Editore: Elsevier BV
DOI: 10.1016/J.JPOWSOUR.2024.235583

Cathodes pinpoints for the next generation of energy storage devices: the LiFePO4 case study

Autori: Beatriz Arouca Maia, Beatriz Moura Gomes, Antonio Nuno Guerreiro, Raquel Miriam Santos and Maria Helena Braga
Pubblicato in: Journal of Physics: Materials, Numero volume 7, number 2, 2024, ISSN 2515-7639
Editore: IOP Science
DOI: 10.1088/2515-7639/ad218c