SCALABLE AND SUSTAINABLE PILOT LINE BASED ON INNOVATIVE MANUFACTURING TECHNOLOGIES TOWARDS THE INDUSTRIALISATION OF SOLID-STATE BATTERIES FOR THE AUTOMOTIVE SECTOR

Informations projet

SPINMATE

N° de convention de subvention: 101069712

DOI

10.3030/101069712

Date de signature de la CE 22 Avril 2022

Date de début 1 Août 2022

Date de fin 31 Juillet 2026

Financé au titre de

• Climate, Energy and Mobility

Coût total

€ 6 976 599,50

Contribution de l’UE

€ 6 976 599,00

Coordonné par

AVESTA HOLDING
Belgium

CORDIS fournit des liens vers les livrables publics et les publications des projets HORIZON.

Les liens vers les livrables et les publications des projets du 7e PC, ainsi que les liens vers certains types de résultats spécifiques tels que les jeux de données et les logiciels, sont récupérés dynamiquement sur OpenAIRE .

Livrables

Documents, reports (15)

Communication, dissemination and training activities report - First version

This report will describe the actions performed by the consortium until Month 14, including their effectiveness to reach the dissemination and communication goals, as well as an updated plan of actions for the following period

Sustainability performance (LCA) and cost assessment

Report of the life cycle environmental and economic performance of the SSB small and large-scale cell prototypes, with the support of the matured digital data platform. This will correspond to the results produced along the tasks 8.1, 8.2 and 8.3.

Gender Equality Action Plan

This deliverable will provide a strategy to promote gender equality though workshops and dissemination events

Standardisation assessment report - Interim

This report will provide an overview of technologies and related standards

Data Management Plan

This deliverable will provide the strategy on how research and project data will be generated collected handled and exchanged during the project

Exploitation activities roadmap

This report will provide the project’s exploitation strategy and the individual exploitation plans of each partner

Report on the conclusions of the dedicated workshops (revised version)

Revised deliverable D3.2 which presents the project results and to share the outcomes during the planned workshops

Management Handbook

This deliverable consists of a document describing management and quality procedures

Plan for Dissemination and Exploitation of Results - PDER

Report describing the Plan for Dissemination and Exploitation of Results PDER for the SPINMATE project

Formation protocol and performances of monolayer cells

The delivery will describe the optimized formation protocol and the results of the electrochemical tests, performed at various conditions, on the monolayer pouch cells.

Pilot line and eco-design regulation towards disassembly requirements

The deliverable will provide the requirements for the pilot line design, in terms of production performances, equipment needs and safety. It will also provide indications on how to design cell and modules, in order to facilitate the operations of dismantling at end of life.

Recycling process flow design

This deliverable will map out the recycling design process flow of Spinmate technology.

Communication, dissemination and training activities report - Second version

This report will describe the actions performed by the consortium between Month 15 and Month 31, including their effectiveness to reach the dissemination and communication goals, as well as an updated plan of actions for the following period

Large pouch cell and module prototypes design & assembly definitions

In accordance with the specification requirements derived from WP2 as well as the small scale experiments in WP3 and the equipment modification in WP5, a design (e.g. cell format, cathode loading, anode and separator thickness etc.) for the manufacturing of the large prototype cells will be defined. After two years of the project, all parameters and techniques are clear and the production and assembly of the 10 Ah demonstrator cells can start.

Report on the conclusions of the dedicated workshops

The goal of this deliverable is to promote the project results and to share the outcomes during the planned workshops

Publications

Peer reviewed articles (4)

Research, development, and innovation insights for solid-state lithium battery: laboratory to pilot line production

Auteurs: Rahmandhika Firdauzha Hary Hernandha
Publié dans: Discover Electrochemistry, Numéro 2, 2025, ISSN 3005-1215
Éditeur: Springer Science and Business Media LLC
DOI: 10.1007/S44373-025-00040-Y

Revealing the impact of CO₂ exposure during calcination on the physicochemical and electrochemical properties of LiNi_0.8Co_0.1Mn_0.1O₂

Auteurs: Marc Nel-lo Pascual, Elías Martínez Moreno, Leif Olaf Jøsang, Maximiliano Merlo, Jordi Jacas Biendicho
Publié dans: Nanoscale, Numéro 16, 2024, ISSN 2040-3364
Éditeur: Royal Society of Chemistry (RSC)
DOI: 10.1039/D4NR04146A

Quasi-solid polymer electrolytes with binary and ternary salt mixtures for high-voltage lithium metal batteries

Auteurs: Nicola Boaretto, Oihane Garcia-Calvo, Mónica Cobos, Asier Fernandez de Añastro, Marta Diez Viera, Mustafa Al Sammarraie Shakir, Simon Lindberg, Rosalia Cid Barreno, Gérôme Godillot, Leif Olav Jøsang, Andriy Kvasha, María Martínez-Ibañez
Publié dans: Energy Materials, Numéro 5, 2025, ISSN 2770-5900
Éditeur: OAE Publishing Inc.
DOI: 10.20517/ENERGYMATER.2024.203

Drivers for Clustering and Inter-Project Collaboration—A Case of Horizon Europe Projects

Auteurs: Takwa Benissa, Anish Patil
Publié dans: Administrative Sciences, Numéro 14, 2024, ISSN 2076-3387
Éditeur: MDPI AG
DOI: 10.3390/ADMSCI14050104