SCALABLE AND SUSTAINABLE PILOT LINE BASED ON INNOVATIVE MANUFACTURING TECHNOLOGIES TOWARDS THE INDUSTRIALISATION OF SOLID-STATE BATTERIES FOR THE AUTOMOTIVE SECTOR

Projektinformationen

SPINMATE

ID Finanzhilfevereinbarung: 101069712

DOI

10.3030/101069712

EK-Unterschriftsdatum 22 April 2022

Startdatum 1 August 2022

Enddatum 31 Juli 2026

Finanziert unter

• Climate, Energy and Mobility

Gesamtkosten

€ 6 976 599,50

EU-Beitrag

€ 6 976 599,00

Koordiniert durch

AVESTA HOLDING
Belgium

CORDIS bietet Links zu öffentlichen Ergebnissen und Veröffentlichungen von HORIZONT-Projekten.

Links zu Ergebnissen und Veröffentlichungen von RP7-Projekten sowie Links zu einigen Typen spezifischer Ergebnisse wie Datensätzen und Software werden dynamisch von OpenAIRE abgerufen.

Leistungen

Documents, reports (15)

Communication, dissemination and training activities report - First version

This report will describe the actions performed by the consortium until Month 14, including their effectiveness to reach the dissemination and communication goals, as well as an updated plan of actions for the following period

Sustainability performance (LCA) and cost assessment

Report of the life cycle environmental and economic performance of the SSB small and large-scale cell prototypes, with the support of the matured digital data platform. This will correspond to the results produced along the tasks 8.1, 8.2 and 8.3.

Gender Equality Action Plan

This deliverable will provide a strategy to promote gender equality though workshops and dissemination events

Standardisation assessment report - Interim

This report will provide an overview of technologies and related standards

Data Management Plan

This deliverable will provide the strategy on how research and project data will be generated collected handled and exchanged during the project

Exploitation activities roadmap

This report will provide the project’s exploitation strategy and the individual exploitation plans of each partner

Report on the conclusions of the dedicated workshops (revised version)

Revised deliverable D3.2 which presents the project results and to share the outcomes during the planned workshops

Management Handbook

This deliverable consists of a document describing management and quality procedures

Plan for Dissemination and Exploitation of Results - PDER

Report describing the Plan for Dissemination and Exploitation of Results PDER for the SPINMATE project

Formation protocol and performances of monolayer cells

The delivery will describe the optimized formation protocol and the results of the electrochemical tests, performed at various conditions, on the monolayer pouch cells.

Pilot line and eco-design regulation towards disassembly requirements

The deliverable will provide the requirements for the pilot line design, in terms of production performances, equipment needs and safety. It will also provide indications on how to design cell and modules, in order to facilitate the operations of dismantling at end of life.

Recycling process flow design

This deliverable will map out the recycling design process flow of Spinmate technology.

Communication, dissemination and training activities report - Second version

This report will describe the actions performed by the consortium between Month 15 and Month 31, including their effectiveness to reach the dissemination and communication goals, as well as an updated plan of actions for the following period

Large pouch cell and module prototypes design & assembly definitions

In accordance with the specification requirements derived from WP2 as well as the small scale experiments in WP3 and the equipment modification in WP5, a design (e.g. cell format, cathode loading, anode and separator thickness etc.) for the manufacturing of the large prototype cells will be defined. After two years of the project, all parameters and techniques are clear and the production and assembly of the 10 Ah demonstrator cells can start.

Report on the conclusions of the dedicated workshops

The goal of this deliverable is to promote the project results and to share the outcomes during the planned workshops

Veröffentlichungen

Peer reviewed articles (4)

Research, development, and innovation insights for solid-state lithium battery: laboratory to pilot line production

Autoren: Rahmandhika Firdauzha Hary Hernandha
Veröffentlicht in: Discover Electrochemistry, Ausgabe 2, 2025, ISSN 3005-1215
Herausgeber: Springer Science and Business Media LLC
DOI: 10.1007/S44373-025-00040-Y

Revealing the impact of CO₂ exposure during calcination on the physicochemical and electrochemical properties of LiNi_0.8Co_0.1Mn_0.1O₂

Autoren: Marc Nel-lo Pascual, Elías Martínez Moreno, Leif Olaf Jøsang, Maximiliano Merlo, Jordi Jacas Biendicho
Veröffentlicht in: Nanoscale, Ausgabe 16, 2024, ISSN 2040-3364
Herausgeber: Royal Society of Chemistry (RSC)
DOI: 10.1039/D4NR04146A

Quasi-solid polymer electrolytes with binary and ternary salt mixtures for high-voltage lithium metal batteries

Autoren: Nicola Boaretto, Oihane Garcia-Calvo, Mónica Cobos, Asier Fernandez de Añastro, Marta Diez Viera, Mustafa Al Sammarraie Shakir, Simon Lindberg, Rosalia Cid Barreno, Gérôme Godillot, Leif Olav Jøsang, Andriy Kvasha, María Martínez-Ibañez
Veröffentlicht in: Energy Materials, Ausgabe 5, 2025, ISSN 2770-5900
Herausgeber: OAE Publishing Inc.
DOI: 10.20517/ENERGYMATER.2024.203

Drivers for Clustering and Inter-Project Collaboration—A Case of Horizon Europe Projects

Autoren: Takwa Benissa, Anish Patil
Veröffentlicht in: Administrative Sciences, Ausgabe 14, 2024, ISSN 2076-3387
Herausgeber: MDPI AG
DOI: 10.3390/ADMSCI14050104