European Commission logo
English English
CORDIS - EU research results
CORDIS

Distributed multiport converters for integration of renewables, storage systems and loads while enhancing performance and resiliency of modern distributed networks

Project description

Innovative power solution for smart grids

Integrating higher shares of renewable energy technologies puts pressure on the low- and medium-voltage distribution grids. Other challenges that modern distribution grids face include the construction of new lines and the connection of several loads at different voltage levels. To combat these issues, the EU-funded iPLUG project will develop novel power electronics based on multiport converters, thus facilitating the integration of multiple renewable sources, energy storage systems and loads to the grid. The proposed converters will be installed in several locations, preventing grid congestion.

Objective

Modern distribution grids are facing important challenges such that the need to integrate massive amounts of renewables and storage in the low and medium voltage distribution grid, enhance the usage of distribution networks to avoid construction of new lines, connect several loads at different voltage levels supplied with alternating or direct current (AC or DC). In order to address the challenges described, iPLUG proposes the development of novel power electronics solutions based on multiport converters in order to enhance the integration of multiple renewable sources, energy storage systems and loads. The proposed converters, installed in several optimal locations, can facilitate a massive integration of renewable avoiding grid congestion and allowing the provision of functionalities to both the end-users and the distribution grid. The project studies both system-level aspects and detailed power electronics innovative solutions for low and medium-voltage applications. iPLUG is organized in six work packages. The system design is addressed, including concept definition, specification, sizing and location optimization. Multiport power converters and their inner control are designed and validated experimentally in the laboratory. The overall system control is also proposed, considering the usage of multiple multiport converters in several use cases and validation the concepts in the lab. Technical, economic, social and environmental impact analysis is conducted. The project consortium is formed by a core of five research institutions, supported by relevant companies which provide key requirements and case studies and analyse the project results.

Coordinator

UNIVERSITAT POLITECNICA DE CATALUNYA
Net EU contribution
€ 607 710,00
Address
CALLE JORDI GIRONA 31
08034 Barcelona
Spain

See on map

Region
Este Cataluña Barcelona
Activity type
Higher or Secondary Education Establishments
Links
Total cost
€ 607 710,00

Participants (6)

Partners (1)