New Generation of Electrical Machines Enabled by Additive Manufacturing

Información del proyecto

EMByAM

Identificador del acuerdo de subvención: 101073250

DOI

10.3030/101073250

Proyecto cerrado

Fecha de la firma de la CE 12 Julio 2022

Fecha de inicio 1 Septiembre 2022

Fecha de finalización 31 Agosto 2026

Financiado con arreglo a

• Marie Skłodowska-Curie Actions (MSCA)

Coste total

Sin datos

Aportación de la UE

€ 1 520 395,20

Coordinado por

GOTTFRIED WILHELM LEIBNIZ UNIVERSITAET HANNOVER
Germany

CORDIS proporciona enlaces a los documentos públicos y las publicaciones de los proyectos de los programas marco HORIZONTE.

Los enlaces a los documentos y las publicaciones de los proyectos del Séptimo Programa Marco, así como los enlaces a algunos tipos de resultados específicos, como conjuntos de datos y «software», se obtienen dinámicamente de OpenAIRE .

Resultado final

Other (4)

Communication Toolkit
Prototyped structures to study the characteristics of AM materials
Detailed planning of all training events
Dissemination of project results and outreach activities

Documents, reports (1)

Report on manufacturing requirements for spatial magnets

Websites, patent fillings, videos etc. (2)

Website for internal collaboration and public website
Audio-visual material

Publicaciones

Conference proceedings (11)

A Review on Properties of 3D Printed Magnetic Cores for Electrical Machines: Additive Manufacturing Methods and Materials

Autores: Akbar Mohammadi Ajamloo, Mohamed N. Ibrahim, Peter Sergeant
Publicado en: 2024 International Conference on Electrical Machines (ICEM), 2024
Editor: IEEE
DOI: 10.15488/18028

Triply Periodic Minimal Surfaces Structure for Efficient Heat Dissipation in Motor Housings: A Convective Potential Analysis

Autores: Shaheer Ul Hassan, Mazahir Hussain Shah, Pavel Gruber, Miroslav Chomat
Publicado en: 2024 International Conference on Electrical Machines (ICEM), 2024
Editor: IEEE
DOI: 10.15488/18029

A Comprehensive Investigation of Low-Cost Permanent Magnet Machines with Ferrite Magnets and Enhanced Magnetic Loading

Autores: Akbar Mohammadi Ajamloo, Frederik Desmet, Peter Sergeant, Mohamed N. Ibrahim
Publicado en: 2025 28th International Conference on Electrical Machines and Systems (ICEMS), 2026
Editor: IEEE
DOI: 10.23919/ICEMS66262.2025.11317286

Reducing AC Joule Losses in Hairpin Windings of Electric Machines: Strategies for Minimizing Losses Due to Radial and Tangential Flux

Autores: Yitbarek Bekele, Olga Korolova, Andreas Biebighäuser, Siddique Akbar, Amir Ebrahimi, Bernd Ponick
Publicado en: 2025 IEEE Energy Conversion Conference Congress and Exposition (ECCE), 2025
Editor: IEEE
DOI: 10.1109/ECCE58356.2025.11260271

Multi-Material Topology Optimization for IPM Machine with Efficient Rare-Earth PM Utilization

Autores: Mohamed Reda Mahmoud, Mohamed N. Ibrahim, Peter Sergeant
Publicado en: IECON 2025 – 51st Annual Conference of the IEEE Industrial Electronics Society, 2025
Editor: IEEE
DOI: 10.1109/IECON58223.2025.11221327

Performance Analysis of High Power Density Propulsion Motors Under Various PWM Strategies

Autores: Hadish Habte Tesfamikael, Mostafa Ahmadi Darmani, Mukhammed Murataliyev, Meiqi Wang, Chris Gerada, Michele Degano
Publicado en: 2025 IEEE Energy Conversion Conference Congress and Exposition (ECCE), 2025
Editor: IEEE
DOI: 10.1109/ECCE58356.2025.11260212

Topology Optimization for a Magnetic Actuator Using Different Gradient-Based Solvers

Autores: Mohamed Reda Mahmoud, Mohamed N. Ibrahim, Peter Sergeant
Publicado en: 2025 Joint MMM-Intermag Conference (INTERMAG), 2025
Editor: IEEE
DOI: 10.1109/INTERMAG49787.2025.11087787

Optimisation of Additively Manufactured Hairpin Windings for High Power Density Traction Motors

Autores: Hadish Habte Tesfamikael, Riccardo Notari, Mukhammed Murataliyev, Meiqi Wang, Chris Gerada, Michele Degano
Publicado en: 2025 IEEE International Electric Machines & Drives Conference (IEMDC), 2025, ISSN 2994-2950
Editor: IEEE
DOI: 10.34657/18299

Enhanced Design and Electromagnetic Analysis of Synchronous Reluctance Machines Using Multi-Material Additive Manufacturing

Autores: Siddique Akbar, Yitbarek Tedla Bekele, Amir Ebrahimi, Bernd Ponick
Publicado en: 2025 IEEE International Electric Machines & Drives Conference (IEMDC), 2026
Editor: IEEE
DOI: 10.1109/IEMDC60492.2025.11061042

Reimagining Hairpin Windings: 3D Transposition through Additive Manufacturing

Autores: Yitbarek Bekele, Olga Korolova, Andreas Biebighäuser, Amir Ebrahimi, Bernd Ponick
Publicado en: 2026 International Power Electronics Conference (IPEC-Nagasaki 2026 - ECCE Asia), 2026
Editor: IEEE
DOI: 10.23919/IPEC-NAGASAKI2026-EC64663.2026.11597360

Topology Optimization for Enhancing Electric Machine Performance: A Review

Autores: Mohamed Reda Mahmoud, Mohamed N. Ibrahim, Peter Sergeant
Publicado en: 2024 International Conference on Electrical Machines (ICEM), 2024
Editor: IEEE
DOI: 10.15488/18036

Peer reviewed articles (13)

Design for Recycling: Prototyping a Rib-less Interior Permanent Magnet Rotor with Enhanced Disassembly

Autores: Akbar Mohammadi Ajamloo, Vincent Van de Peer, Mohamed N. Ibrahim, Peter Sergeant
Publicado en: IEEE Transactions on Magnetics, 2026, ISSN 0018-9464
Editor: Institute of Electrical and Electronics Engineers (IEEE)
DOI: 10.1109/TMAG.2026.3696122

Additively Manufactured Spoke-Type Permanent Magnet Rotors: Solutions to Multidisciplinary Design Challenges and Comparison With Traditional Design

Autores: Akbar Mohammadi Ajamloo, Hans Tiismus, Ants Kallaste, Mohamed N. Ibrahim, Peter Sergeant
Publicado en: IEEE Transactions on Energy Conversion, Edición 41, 2026, ISSN 0885-8969
Editor: Institute of Electrical and Electronics Engineers (IEEE)
DOI: 10.1109/TEC.2025.3619827

Principle of Torque-Axis Alignment in New Asymmetric PM Synchronous Reluctance Machines: Toward Less-Rare-Earth PM Machines

Autores: Akbar Mohammadi Ajamloo; Aghil Ghaheri; Mohamed N. Ibrahim; Peter Sergeant
Publicado en: IEEE Transactions on Transportation Electrification, 2025, ISSN 2332-7782
Editor: IEEE
DOI: 10.34657/18253

Evaluating density-based topology optimization using different material interpolation schemes: Magnetic actuator design case study

Autores: Mohamed Reda Mahmoud, Mohamed N. Ibrahim, Peter Sergeant
Publicado en: Journal of Magnetism and Magnetic Materials, Edición 636, 2025, ISSN 0304-8853
Editor: Elsevier BV
DOI: 10.1016/J.JMMM.2025.173646

Design, Modelling and Optimization of a High Power Density Axial Flux SRM with Reduced Torque Ripple for Electric Vehicles

Autores: Akbar Mohammadi Ajamloo, Mohamed N. Ibrahim, Peter Sergeant
Publicado en: Machines, Edición 11, 2025, ISSN 2075-1702
Editor: MDPI AG
DOI: 10.3390/MACHINES11070759

A New Hybrid Permanent Magnet-Assisted Synchronous Reluctance Motor with Efficient Utilization of Rare-Earth Permanent Magnets

Autores: Akbar Mohammadi Ajamloo, Aghil Ghaheri, Mohamed N. Ibrahim, Peter Sergeant
Publicado en: IEEE Transactions on Energy Conversion, 2024, ISSN 0885-8969
Editor: Institute of Electrical and Electronics Engineers (IEEE)
DOI: 10.15488/18241

Novel Asymmetric IPM Rotor Design Using Cascaded Multiphysics Topology Optimization

Autores: Mohamed Reda Mahmoud, Mohamed N. Ibrahim, Peter Sergeant
Publicado en: CES Transactions on Electrical Machines and Systems, Edición 10, 2026, ISSN 2096-3564
Editor: Institute of Electrical and Electronics Engineers (IEEE)
DOI: 10.30941/CESTEMS.2026.00018

Design Considerations of a New IPM Rotor With Efficient Utilization of PMs Enabled by Additive Manufacturing

Autores: Akbar Mohammadi Ajamloo, Mohamed N. Ibrahim, Peter Sergeant
Publicado en: IEEE Access, Edición 12, 2024, ISSN 2169-3536
Editor: Institute of Electrical and Electronics Engineers (IEEE)
DOI: 10.34657/17957

Investigation of Different Pole Configurations in New Asymmetric Permanent Magnet Synchronous Reluctance Machines

Autores: Akbar Mohammadi Ajamloo, Aghil Ghaheri, Mohamed N. Ibrahim, Peter Sergeant
Publicado en: IEEE Transactions on Magnetics, 2025, ISSN 0018-9464
Editor: Institute of Electrical and Electronics Engineers (IEEE)
DOI: 10.34657/18286

Properties of Additively Manufactured Soft and Hard Magnetic Cores for Electrical Machines: Methods and Materials − A Review

Autores: Akbar Mohammadi Ajamloo, Mohamed N. Ibrahim, Peter Sergeant
Publicado en: IEEE Transactions on Industry Applications, 2025, ISSN 0093-9994
Editor: Institute of Electrical and Electronics Engineers (IEEE)
DOI: 10.34657/18289

Loss Characterization of Additively Manufactured Windings for Aerospace Propulsion Motors

Autores: Hadish Habte Tesfamikael, Mostafa Ahmadi Darmani, Mukhammed Murataliyev, Richard J. M. Hague, Chris Gerada, Michele Degano
Publicado en: IEEE Transactions on Transportation Electrification, Edición 12, 2026, ISSN 2332-7782
Editor: Institute of Electrical and Electronics Engineers (IEEE)
DOI: 10.1109/TTE.2026.3683253

Static eccentricity effect on no-load performance of FSCW PM machines with series and parallel windings

Autores: A. M. Ajamloo, M. N. Ibrahim, P. Sergeant
Publicado en: IET Conference Proceedings, Edición 2023, 2024, ISSN 2732-4494
Editor: Institution of Engineering and Technology (IET)
DOI: 10.1049/ICP.2023.2013

Design for Recycling: Prototyping a Rib-Less Interior Permanent Magnet Rotor With Enhanced Disassembly

Autores: Akbar Mohammadi Ajamloo, Vincent Van de Peer, Mohamed N. Ibrahim, Peter Sergeant
Publicado en: IEEE Transactions on Magnetics, Edición 62, 2026, ISSN 0018-9464
Editor: Institute of Electrical and Electronics Engineers (IEEE)
DOI: 10.1109/TMAG.2026.3696122