DigitAl and physical incrEmental renovation packaGes/systems enhancing envIronmental and energetic behaviour and use of Resources

Información del proyecto

AEGIR

Identificador del acuerdo de subvención: 101079961

DOI

10.3030/101079961

Fecha de la firma de la CE 15 Septiembre 2022

Fecha de inicio 1 Octubre 2022

Fecha de finalización 30 Septiembre 2026

Financiado con arreglo a

• Climate, Energy and Mobility

Coste total

€ 13 790 078,55

Aportación de la UE

€ 10 558 608,73

Coordinado por

FUNDACION TECNALIA RESEARCH & INNOVATION
Spain

CORDIS proporciona enlaces a los documentos públicos y las publicaciones de los proyectos de los programas marco HORIZONTE.

Los enlaces a los documentos y las publicaciones de los proyectos del Séptimo Programa Marco, así como los enlaces a algunos tipos de resultados específicos, como conjuntos de datos y «software», se obtienen dinámicamente de OpenAIRE .

Resultado final

Documents, reports (9)

Capacity Building Information Package on Hol.Assess.

Implementation and development of a structured capacity building programme and engagement plan.Task referred to: T8.1

Incremental envelope system design requirements

Definition of the requirements to be fulfilled by the incremental envelope system.Task referred to: T4.1

CDE Requirements from design to operation

Common data environment requirements definition across the entire process.Task referred to: T5.1

Sustainable requirements

Sustainable approach of the AEGIR solution based on the different regulations and approaches about circularity.Task referred to: T2.3

Requirements and specifications of the solution

Main requirements and specifications for the design of the AEGIR solutionTask referred to: T2.1

2nd Plan for dissemination and exploitation including C.A.

Definition of the second plan for dissemination and exploitation including communication activities.Task referred to: T9.1

Holistic Assessment of the Replication Potential

Analysis of the predominant building typologies and building uses around the demo sites and in Europe to assess the replication and market potential in the different countries.Task referred to: T8.2

Procedures for the execution of the demonstrators

To develop the procedures which maps the demonstration process, the activities and the technical requirements that must be completed.Task referred to: T7.1

1st Plan for dissemination and exploitation including C.A.

Definition of the first plan for dissemination and exploitation including communication activities.Task referred to: T9.1

Demonstrators, pilots, prototypes (3)

French demo - Intervention project

Definition of the execution project of the intervention for the french demo.Task referred to: T7.3

Romanian demo – Intervention Project

Definition of the execution project of the intervention for the romanian demo.Task referred to: T7.5

Spanish demo - Intervention project

Definition of the execution project of the intervention for the spanish demo.Task referred to: T7.2

Publicaciones

Conference proceedings (3)

Circularity potential of building products. Material flow analysis of façade building components

Autores: Zabek Magdalena, Konstantinou Thaleia, Gálvez-Matos José Luis
Publicado en: Proceedings of 37 th PLEA Conference, Sustainable Architecture and Urban Design, 2024
Editor: PLEA
DOI: 10.37190/PLEA_2024

La madera en envolventes de edificios en el contexto del Pacto Verde Europeo

Autores: Vanesa Baño, Uwe Kies, Javier García-Jaca, Julen Astudillo
Publicado en: """4º Fórum International de Construcción con Madera"" Editors:José Manuel Cabrero Ballarín and Ibán Carpintero López", 2024, ISBN 978-3-906226-63-7
Editor: Forum Holzbau, Bahnhofplatz 1, 2502 Biel, Schweiz
DOI: 10.5281/zenodo.11548890

Proposal of an effort-benefit diagram to compare unit and room air-change rates applied to a literature review

Autores: Auerswald Sven, Wagner Andreas, Henning Hans Martins
Publicado en: 2023
Editor: AIVC Publications
DOI: 10.5281/ZENODO.15528106

Other (1)

Development Process of a Biobased Envelope in the European Project BASAJAU+AEGIR

Autores: Fuente, Marta
Publicado en: Rebuild (Rebuild) , Madrid, Spain, 28-30 March 2023, 2023
Editor: InnovaWood
DOI: 10.5281/ZENODO.11262586