Mass customization 2.0 for Integrated PV

Información del proyecto

MC2.0

Identificador del acuerdo de subvención: 101096139

DOI

10.3030/101096139

Proyecto cerrado

Fecha de la firma de la CE 13 Diciembre 2022

Fecha de inicio 1 Enero 2023

Fecha de finalización 28 Febrero 2026

Financiado con arreglo a

• Climate, Energy and Mobility

Coste total

€ 8 977 744,03

Aportación de la UE

€ 7 592 626,00

Coordinado por

NEDERLANDSE ORGANISATIE VOOR TOEGEPAST NATUURWETENSCHAPPELIJK ONDERZOEK TNO
Netherlands

CORDIS proporciona enlaces a los documentos públicos y las publicaciones de los proyectos de los programas marco HORIZONTE.

Los enlaces a los documentos y las publicaciones de los proyectos del Séptimo Programa Marco, así como los enlaces a algunos tipos de resultados específicos, como conjuntos de datos y «software», se obtienen dinámicamente de OpenAIRE .

Resultado final

Documents, reports (16)

Communication Plan and Realization Report 1st revision

Communication Plan and Realization Report, 1st revision. Task 6.4.

Dissemination Plan & Realization report 1st revision

Dissemination Plan & Realization report, 1st revision. Task 6.4.

Communication Plan and Realization Report 2nd revision

Communication Plan and Realization Report, 2nd revision. Task 6.4.

Certification Status Report

Report on currently existing standards and norms applicable to the different IPV products for specified regions. The report will include an analysis of the current state of the art and missing gaps. Task 4.2.

Project Quality Plan 1st revision

Project Quality Plan 1st Revision. Task 6.1.

Dissemination Plan & Realization report

Dissemination Plan & Realization report. Task 6.4.

Archetypes

Market Archetypes report and competitiveness. The report will describe the status of the European BIPV market and the demand/offer of IPV technologies in terms of archetypes and technology integration. Task 3.2.

LCA analysis and supply chain optimisation

LCA analysis and supply chain optimisation.In this deliverable we will report on the output of the LCA analysis and the results of the supply chain optimisation model. Task 5.1.

Announcement of the winner of the IPV design contest & jury report

Announcement of the winner of the IPV design contest & jury report. Task 6.3.

Supply chain analysis

Supply chain analysis and workflow improvements. The mapping of the value + supply chain will guide the definition of quality gates where decisions can have an impact on the next phase of the IPV value-chain. This impact will be assessed, and mitigation measures will be presented. Task 4.1

Project Quality Plan final revision

Project Quality Plan, final revision. Task 6.1.

Report of kick-off meeting

Report of kick-off meeting. Task 6.1.

Industrial Board meeting report 1

Industrial Board meeting report nr 1. Task 6.2.

Project Quality Plan

Project Quality Plan. Task 6.1.

Industrial Board Meeting report 2

Industrial Board meeting report nr 2. Task 6.2.

Communication Plan and Realization Report

Communication Plan and Realization Report. Task 6.4.

Data Management Plan (1)

Data Management Plan

Data Management Plan. Task 6.1.

Other (1)

Cost calculation tool

This is a modelling tool. The use of the tool will be made publicly available. However, the source code will not be published. Validated cost calculation tool for IPV cost based on mass customization 2.0. Task 3.1.

Publicaciones

Conference proceedings (11)

Poster: Integrated design process supporting the customization of BIPV applications within curtain wall façades based on quantum dot-luminescent solar concentrator technology

Autores: Martina Pelle, Claudio Castellan, Marcello La Rosa, Alexander Astigarraga, Giorgio Belluardo, Martino Gubert, Laura Maturi
Publicado en: EU PVSEC 2024, 2024
Editor: EU PVSEC 2024

First steps to a Mass Customization 2.0 process for a clever design of semi-fabricates integrated in BIPV-products

Autores: Roland Valckenborg et all
Publicado en: EU PVSEC 2023, 2023
Editor: Zenodo
DOI: 10.5281/ZENODO.17307999

Poster: Mass Customization 2.0 project produces BIPV market outlook analysis and first series of semi-fabricates based on design documents of four BIPV-products

Autores: Roland Valckenborg, Nikoleta Kyranaki, Simona Villa, Atse Louwen, Paolo Corti, Cristina Polacchi, Gernot Oreski, Davide Colla, Yuri van Bergen, Marton Berkers, Marc Meuris, Andreas Haller1, Marcello LaRosa, Julian Witowski, Paolo Frigeri, Jan Teunis,..
Publicado en: EU PVSEC 2024, 2024
Editor: EU PVSEC

A comparison of the environmental impact of integrated flexible CIGS with rigid CIGS and x-Si modules

Autores: Mirjam Theelen, Lia de Simon, Mitchell van der Hulst, Diana Bizarro, Josco Kester, Ando Kuypers, Mara Hauck
Publicado en: EU PVSEC 2024, 2024
Editor: EU PVSEC

Isotropically Conductive Adhesives for R2R Lamination of Flexible PV Modules

Autores: Joris de Riet, Aldo Kingma, Cristina Polacchi, Casper van Kessel, Marc Koetse, Monique van den Nieuwenhof, Jochen Schuermans, Pierpaolo Spinelli, Mirjam Theelen, Dorrit Roosen
Publicado en: EU PVSEC 2025, 2025
Editor: EU PVSEC

Evaluation of Polyolefin Encapsulants for Roll-to-Roll Lamination Applications

Autores: P. Christöfl, C.G.M. van Kessel, M.M. Koetse, D. Roosen, G. Oreski
Publicado en: EU PVSEC 2025, 2025
Editor: EUPVSEC

Defining circularity via a Product-Level Circularity Metric

Autores: Mirjam Theelen, Marylou Karpinski, Niels van Loon, Simona Villa
Publicado en: EU PVSEC 2024, 2024
Editor: EU PVSEC

Technical and economic aspects of adhesives for Integrated Photovoltaics

Autores: Sonja Feldbacher, Petra Christöfl, Suzanne Westerdijk, Andreas Haller, Pascal Suter, Gernot Oreski, Jochen Schuermans, Filip Uyttehove, Nikoleta Kyranaki, Roland Valkenborg
Publicado en: EU PVSEC 2025, 2025
Editor: EU PVSEC

Are BIPV contributing to environmental sustainability? An Environmental LCA analysis of innovative BIPV solutions

Autores: Cristina Polacchi, Atse Louwen, Mirjam Theelen, David Moser
Publicado en: EU PVSEC 2024, 2024, ISBN 3-936338-90-6
Editor: EU PVSEC

Poster: First Steps to a Mass Customization 2.0 Process for a Clever Design of Semi-fabricates Integrated in BIPV-products

Autores: Roland M. E. Valckenborg, Simona Villa, Marc Koetse, Atse Louwen, David Moser, Paolo Corti, Francesco Frontini, Michaël Daenen, Nikoleta Kyranaki, Gernot Oreski, Davide Colla, Yuri van Bergen, Marton Berkers, Marc Meuris, Andreas Haller, Alessandro Pracuc
Publicado en: EU PVSEC 2023 proceedings, 2023, ISSN 2196-100X
Editor: EU PVSEC

Modelling and Optimisation of AgrivoltaicSystems Optimizing Crop Irradiance Distributions: PV Cell Layouts and Materials Diffusivity Influence on AgriPV Systems

Autores: Alvaro de Gruijter, Marco Memminger, Giovanni Borz, Jordi Veirman, David Moser, Luis Fialho
Publicado en: EU PVSEC 2025, 2025
Editor: EU PVSEC

Other (3)

D5.1 - LCA analysis and supply chain optimisation

Autores: Cristina Polacchi et all.
Publicado en: 2026
Editor: Zenodo
DOI: 10.5281/ZENODO.18199400

CostInsight Production Cost Modelling

Autores: Niels van Loon
Publicado en: 2023
Editor: Zenodo
DOI: 10.5281/zenodo.10422412

Product Level Circularity Metric (PLCM) applicable to solar photovoltaics (PV) modules

Autores: Simona Villa, Mirjam Theelen, Marylou Karpinski
Publicado en: 2025
Editor: Zenodo
DOI: 10.5281/ZENODO.17672040

Peer reviewed articles (1)

DESIGNING BIPV. Strategies for managing complexity in the integration of photovoltaics in facades

Autores: Giovanardi, M (LEV), Castellan, C. (G2P), La Rosa, M. (G2P), Pavlovic, A. (G2P) and Pracucci, A. (LEV)
Publicado en: AGATHON, 2024, ISSN 2532-683X
Editor: Palermo University Press New Digital Frontiers srl
DOI: 10.19229/2464-9309/16152024