RECYCLE, REPURPOSE AND REUSE END-OF-LIFE WIND BLADE COMPOSITES – A COUPLED PRE- AND CO-PROCESSING DEMONSTRATION PLANT

Información del proyecto

Blades2Build

Identificador del acuerdo de subvención: 101096437

DOI

10.3030/101096437

Fecha de la firma de la CE 13 Diciembre 2022

Fecha de inicio 1 Enero 2023

Fecha de finalización 31 Marzo 2026

Financiado con arreglo a

• Climate, Energy and Mobility

Coste total

€ 15 490 034,00

Aportación de la UE

€ 12 362 239,68

Coordinado por

DANMARKS TEKNISKE UNIVERSITET
Denmark

CORDIS proporciona enlaces a los documentos públicos y las publicaciones de los proyectos de los programas marco HORIZONTE.

Los enlaces a los documentos y las publicaciones de los proyectos del Séptimo Programa Marco, así como los enlaces a algunos tipos de resultados específicos, como conjuntos de datos y «software», se obtienen dinámicamente de OpenAIRE .

Resultado final

Documents, reports (4)

Data management plan

Data management plan will describe a Quality Management System (QMS) to be applied in BLADES2BUILD. This deliverable will guarantee that data will respond to the FAIR principles established by the EU.

Dissemination Kit

This deliverable consists of a dissemination Kit containing Blades2Build information for stakeholders, members of the UB and AB, among others.

Plan for the Exploitation & Dissemination of Results (PEDR)

After M6, a full plan for the Exploitation & Dissemination of Results (PEDR) will be developed between GCS and all the Blades2Build partners. Contribute, upon invitation by the CINEA, to common information and dissemination activities to increase the visibility and synergies between Horizon Europe supported actions.

R&D report on Laboratory developments of the best recycling methods to produce high-quality recyclates from EOL composite materials for the GO/NO-GO decision

After testing in the Laboratory the recycling methods to produce high-quality recyclates from EOL composite materials, we will describe here the best ones to be upgraded for the GO/NO-GO decision

Other (1)

Computational model for prediction of post-repair lifetime of WTB

This task will build on the previous one to develop a computational model to predict how the blade repair will be carried out. This will result in a publicly available model to predict of post-repair lifetime of WTB.

Publicaciones

Peer reviewed articles (19)

Recycling of Glass Fibers from Wind Turbine Blade Wastes via Chemical-Assisted Solvolysis

Autores: Maria Modestou, Dionisis Semitekolos, Tao Liu, Christina Podara, Savvas Orfanidis, Ana Teresa Lima, Costas Charitidis
Publicado en: Fibers, Edición 13, 2025, ISSN 2079-6439
Editor: MDPI AG
DOI: 10.3390/FIB13120163

Healable polymer blends: Computational analysis of damage and healing mechanisms

Autores: Yulin Sun, Leon Mishnaevsky Jr.
Publicado en: International Journal of Mechanical Sciences, Edición 287, 2025, ISSN 0020-7403
Editor: Elsevier BV
DOI: 10.1016/J.IJMECSCI.2025.109938

Materials and Design

Autores: Antonios Tempelis; Leon Mishnaevsky
Publicado en: Materials & Design, 2022, ISSN 0264-1275
Editor: Elsevier
DOI: 10.1016/J.MATDES.2023.112011

Erosion modelling on reconstructed rough surfaces of wind turbine blades

Autores: Antonios Tempelis, Leon Mishnaevsky Jr.
Publicado en: Wind Energy, Edición 26, 2023, ISSN 1095-4244
Editor: Wiley
DOI: 10.1002/WE.2848

How to Repair the Next Generation of Wind Turbine Blades

Autores: Leon Mishnaevsky Jr.
Publicado en: Energies, Edición 16, 2025, ISSN 1996-1073
Editor: MDPI AG
DOI: 10.3390/EN16237694

Effect of wind turbine blade waste on cement hydration and gel structure: Competitive interaction of glass and polyester resin

Autores: Tao Liu, Ceren Duyal, Charilaos Paraskevoulakos, Kasper Enemark-Rasmussen, Ashal Tyurkay, Nataliya Lushnikova, Florent Gauvin, Ana Teresa Lima
Publicado en: Composites Part B: Engineering, Edición 311, 2026, ISSN 1359-8368
Editor: Elsevier BV
DOI: 10.1016/J.COMPOSITESB.2025.113273

Recycling carbon fibers by solvolysis: Effects of porosity and process parameters

Autores: Daniele Tortorici, Yi Chen, Leon Mishnaevsky, Susanna Laurenzi
Publicado en: Composites Part A: Applied Science and Manufacturing, Edición 190, 2025, ISSN 1359-835X
Editor: Elsevier BV
DOI: 10.1016/J.COMPOSITESA.2024.108667

Recent Trends of Recycling and Upcycling of Polymers and Composites: A Comprehensive Review

Autores: Christina Podara, Stefania Termine, Maria Modestou, Dionisis Semitekolos, Christos Tsirogiannis, Melpo Karamitrou, Aikaterini-Flora Trompeta, Tatjana Kosanovic Milickovic, Costas Charitidis
Publicado en: recycling, 2024, ISSN 2313-4321
Editor: MDPI
DOI: 10.3390/recycling9030037

Improving mortar properties with waste wind turbine blade fibers and superplasticizer

Autores: Tao Liu, Huber Reascos, Umair Abid Mughal, Gunvor Marie Kirkelund, Ana Teresa Lima
Publicado en: Construction and Building Materials, Edición 472, 2025, ISSN 0950-0618
Editor: Elsevier BV
DOI: 10.1016/J.CONBUILDMAT.2025.140864

Investigating the microstructure of mortar systems reinforced with wind turbine blade waste using X-ray computed tomography

Autores: Charilaos Paraskevoulakos, Tao Liu, Ana Teresa Lima
Publicado en: Construction and Building Materials, Edición 509, 2026, ISSN 0950-0618
Editor: Elsevier BV
DOI: 10.1016/J.CONBUILDMAT.2026.145187

State-of-the-art circular economy practices for end-of-life wind turbine blades for use in the construction industry

Autores: Ashal Tyurkay, Gunvor M. Kirkelund, Ana Teresa Macas Lim
Publicado en: Sustainable Production and Consumption, 2024, ISSN 2352-5509
Editor: ELSEVIER
DOI: 10.1016/j.spc.2024.03.018

Modeling the Solvolysis of Composite Materials of Wind Turbine Blades

Autores: Yi Chen, Leon Mishnaevsky
Publicado en: Advanced Engineering Materials, Edición 26, 2025, ISSN 1438-1656
Editor: Wiley
DOI: 10.1002/ADEM.202302150

Surface roughness evolution of wind turbine blade subject to rain erosion

Autores: Antonios Tempelis, Leon Mishnaevsky
Publicado en: Materials & Design, Edición 231, 2025, ISSN 0264-1275
Editor: Elsevier BV
DOI: 10.1016/J.MATDES.2023.112011

Self-healing interfaces in fiber reinforced polymers: Computational modeling

Autores: Yulin Sun, Laura Simonini, Chen Xing, Leon Mishnaevsky
Publicado en: Composites Science and Technology, Edición 270, 2025, ISSN 0266-3538
Editor: Elsevier BV
DOI: 10.1016/J.COMPSCITECH.2025.111269

Mechanisms and applications of wind turbine blade waste in cementitious composites: A review

Autores: Tao Liu, Charilaos Paraskevoulakos, Umair Abid Mughal, Ashal Tyurkay, Nataliya Lushnikova, Helong Song, Ceren Duyal, Shashank Tumkur Karnick, Florent Gauvin, Ana Teresa Lima
Publicado en: Materials & Design, Edición 251, 2025, ISSN 0264-1275
Editor: Elsevier BV
DOI: 10.1016/J.MATDES.2025.113732

Multifield computational model of chemical recycling of polymer composites: Temperature effects on solvolysis efficiency and energy consumption

Autores: Yi Chen, Justine Beauson, Asger Bech Abrahamsen, Leon Mishnaevsky
Publicado en: Journal of Cleaner Production, Edición 501, 2025, ISSN 0959-6526
Editor: Elsevier BV
DOI: 10.1016/J.JCLEPRO.2025.145313

Wind Energy

Autores: Antonios Tempelis; Leon Mishnaevsky Jr.
Publicado en: Wind Energy, 2023, ISSN 1095-4244
Editor: Wiley
DOI: 10.1002/WE.2848

A New Concept of Sustainable Wind Turbine Blades: Bio-Inspired Design with Engineered Adhesives

Autores: Leon Mishnaevsky; Mohsen Jafarpour; Johanna Krüger; Stanislav N. Gorb
Publicado en: Biomimetics, 2023, ISSN 2313-7673
Editor: MDPI
DOI: 10.3390/BIOMIMETICS8060448

Self-Repairing Polyurethane–Urea Coating for Wind Turbine Blades: Modeling and Analysis

Autores: Yulin Sun, Leon Mishnaevsky, Katharina Koschek, Florian Sayer
Publicado en: Coatings, Edición 15, 2025, ISSN 2079-6412
Editor: MDPI AG
DOI: 10.3390/COATINGS15091059