HIGH-TEMPERATURE THERMOCHEMICAL HEAT STORAGE POWERED BY RENEWABLE ELECTRICITY FOR INDUSTRIAL HEATING APPLICATIONS

Informations projet

HERCULES

N° de convention de subvention: 101104182

DOI

10.3030/101104182

Date de signature de la CE 21 Avril 2023

Date de début 1 Juin 2023

Date de fin 31 Mai 2027

Financé au titre de

• Climate, Energy and Mobility

Coût total

€ 3 988 016,25

Contribution de l’UE

€ 3 988 016,00

Coordonné par

UNIVERSITEIT TWENTE
Netherlands

CORDIS fournit des liens vers les livrables publics et les publications des projets HORIZON.

Les liens vers les livrables et les publications des projets du 7e PC, ainsi que les liens vers certains types de résultats spécifiques tels que les jeux de données et les logiciels, sont récupérés dynamiquement sur OpenAIRE .

Livrables

Documents, reports (9)

First version of dissemination and exploitation plan

The exploitation actions will proceed in parallel and interact with the dissemination activities; both strategies will be reported within three common deliverables. Measures regarding the possibility of patenting the major outcomes and the exploitation (licensing/royalty agreements) of the produced results, monitoring of plans, progress and generation of exploitable results. Referred to Task 7.2.

Finalized morphology and geometry of the redox oxide based porous structure

The optimized redox material will be developed in foam and honeycomb structures with different morphology and geometries. These structures will be evaluated for stability, porosity void fraction, pore size distribution, and surface area after going through the expected operating conditions. Referred to tasks 1.3 and 1.4

Shortlist of redox compositions identified via computational screening process as in principle promising for further development

A first shortlist of most promising redox materials via computational screening using Density Function Theory (DFT) and thermodynamic calculations. For these calculations, commercial software and in-house built codes will be used. Referred to task 1.1

Project’s website, protected acronym, electronic communications network

Launch of projects website, protected acronym, electronic communications network and social media account. Referred to Task 7.1

Quality and risk management plan

Quality and risk management plan will provide main procedures and rules on the quality assurance and risk management of the project. Referred to task 8.4

Report on thermophysical properties of the reactive material at the relevant temperatures

Thermophysical properties (reaction enthalpy, heat capacity, effective thermal conductivity, heat transfer coefficient) and energy storage density of the optimized metal oxide will be determined using commercial and in-house built measurement systems. Referred to task 2.1

Report on thermomechanical properties of the synthesized redox material structure

The thermo-mechanical properties such as microstructure, density, porosity, pore size distribution, permeability, refractoriness, mechanical strength, and thermal shock resistance will be comparatively evaluated for the synthesized structures using Hg and N2 porosimetry, XRD, SEM, and mechanical strength and thermal shock resistance tests. Possible failure mechanism will be identified and corrective actions for the improvement of reactive material will be taken. Referred to task 2.2.

Redox material reactivity results after cyclic operation

The optimized redox material porous structures will be tested for the long-term cyclic operations (at least 200 cycles) to determine the potential loss in oxygen transfer activity, reaction enthalpy, and/or thermal performance stability. Referred to task 1.5

Finalized list of container and insulation materials

A list of suitable storage container and insulation materials based on thermal conductivity, mechanical and structural strength at higher-temperatures (> 1100 oC), operating temperature, corrosion, and cost will be determined. These materials will be further developed in this WP for the storage module fabrication and testing. Referred to task 4.1

Data Management Plan (1)

Data management plan

Data Management Plan distinguishing data as private, publishable and Open Access, and defining the main criteria adopted to distinguish among them. Referred to Task 8.5

Publications

Peer reviewed articles (1)

Numerical study of a copper oxide-based thermochemical heat storage system

Auteurs: Zhen Cao, Bas Joris de Leeuw, Tianchao Xie, Abhishek K. Singh
Publié dans: Case Studies in Thermal Engineering, Numéro 63, 2024, ISSN 2214-157X
Éditeur: Elsevier BV
DOI: 10.1016/j.csite.2024.105315