Multiscale Characterisation and Simulation for Hydrogen Embrittlement Assessment: Development of an Open Knowledge Platform to Foster Capability Integration

Información del proyecto

HyWay

Identificador del acuerdo de subvención: 101135374

DOI

10.3030/101135374

Fecha de la firma de la CE 14 Noviembre 2023

Fecha de inicio 1 Enero 2024

Fecha de finalización 31 Diciembre 2027

Financiado con arreglo a

• Digital, Industry and Space

Coste total

€ 6 947 437,50

Aportación de la UE

€ 6 947 437,50

Coordinado por

TEKNOLOGIAN TUTKIMUSKESKUS VTT OY
Finland

CORDIS proporciona enlaces a los documentos públicos y las publicaciones de los proyectos de los programas marco HORIZONTE.

Los enlaces a los documentos y las publicaciones de los proyectos del Séptimo Programa Marco, así como los enlaces a algunos tipos de resultados específicos, como conjuntos de datos y «software», se obtienen dinámicamente de OpenAIRE .

Resultado final

Other (1)

Life cycle assessment and circularity by design mod-ule available for implementing on DKMP

Deliverable for Task 3.4:The life cycle assessment and circularity by design module is implemented.

Documents, reports (5)

Hydrogen charging protocols

Deliverable for Task 4.4:Electrochemical and gas-phase charging protocols to ensure reproducibility across different laboratories.

Design of the DKMP

Deliverable for Task 3.1, 3.2, and 3.3:The design of the DKMP is specified describing its structure and behaviour, including hydrogen-materials interactions ontology and process modelling notations and generalised interfaces for connecting multiscale and multiphysics materials modelling modules.

Dissemination, communication, exploitation, stand-ardisation and networking action plan

Deliverable for Task 9.1, 9.2, 9.3, 9.4, and 9.5:Detailed plan for the dissemination, communication, exploitation, standardisation and networking actions that will be performed in the project with measurable KPIs. On the exploitation side, a draft list of the Key Exploitable Results will be provided together with the partners involved.

Atomistic models to investigate the hydrogen effect on mechanical properties

Deliverable for Task 7.3:Report on a quantum-mechanical level atomistic simulation scheme to investigate the hydrogen effect on mechanical properties.

Characterisation and simulation specification

Deliverable for Task 2.1, 2.2, and 2.3:Characterisation and simulation planned to achieve the goals of each use case

Data sets, microdata, etc (1)

Tomography and DCT

Deliverable for Task 6.1Data of the initial microstructure obtained by absorption tomography and by diffraction contrast tomogra-phy (when suitable i.e. non-strained stainless steel).

Publicaciones

Peer reviewed articles (2)

"In-situ 3D X-ray tomography under high-pressure H <mml:math xmlns:mml=""http://www.w3.org/1998/Math/MathML"" altimg=""si47.svg"" display=""inline"" id=""d1e227""> <mml:msub> <mml:mrow/> <mml:mrow> <mml:mn>2</mml:mn> </mml:mrow> </mml:msub> </mml:math> : Direct observation and quantification of hydrogen-induced damage evolution in steel during tensile testing"

Autores: L.M. Santana, V. Okumko, A. King, L. Henry, C. Bolitt, S. Nicole, H. Proudhon, T.F. Morgeneyer, Y. Madi
Publicado en: International Journal of Hydrogen Energy, Edición 229, 2026, ISSN 0360-3199
Editor: Elsevier BV
DOI: 10.1016/J.IJHYDENE.2026.154770

LLM-supported collaborative ontology design for data and knowledge management platforms

Autores: Janis Kampars, Guntis Mosans, Tushar Jogi, Franz Roters, Napat Vajragupta
Publicado en: Frontiers in Big Data, Edición 8, 2025, ISSN 2624-909X
Editor: Frontiers Media SA
DOI: 10.3389/FDATA.2025.1676477