Multiscale Characterisation and Simulation for Hydrogen Embrittlement Assessment: Development of an Open Knowledge Platform to Foster Capability Integration

Informacje na temat projektu

HyWay

Identyfikator umowy o grant: 101135374

DOI

10.3030/101135374

Data podpisania przez KE 14 Listopada 2023

Data rozpoczęcia 1 Stycznia 2024

Data zakończenia 31 Grudnia 2027

Finansowanie w ramach

• Digital, Industry and Space

Koszt całkowity

€ 6 947 437,50

Wkład UE

€ 6 947 437,50

Koordynowany przez

TEKNOLOGIAN TUTKIMUSKESKUS VTT OY
Finland

CORDIS oferuje możliwość skorzystania z odnośników do publicznie dostępnych publikacji i rezultatów projektów realizowanych w ramach programów ramowych HORYZONT.

Odnośniki do rezultatów i publikacji związanych z poszczególnymi projektami 7PR, a także odnośniki do niektórych konkretnych kategorii wyników, takich jak zbiory danych i oprogramowanie, są dynamicznie pobierane z systemu OpenAIRE .

Rezultaty

Other (1)

Life cycle assessment and circularity by design mod-ule available for implementing on DKMP

Deliverable for Task 3.4:The life cycle assessment and circularity by design module is implemented.

Documents, reports (5)

Hydrogen charging protocols

Deliverable for Task 4.4:Electrochemical and gas-phase charging protocols to ensure reproducibility across different laboratories.

Design of the DKMP

Deliverable for Task 3.1, 3.2, and 3.3:The design of the DKMP is specified describing its structure and behaviour, including hydrogen-materials interactions ontology and process modelling notations and generalised interfaces for connecting multiscale and multiphysics materials modelling modules.

Dissemination, communication, exploitation, stand-ardisation and networking action plan

Deliverable for Task 9.1, 9.2, 9.3, 9.4, and 9.5:Detailed plan for the dissemination, communication, exploitation, standardisation and networking actions that will be performed in the project with measurable KPIs. On the exploitation side, a draft list of the Key Exploitable Results will be provided together with the partners involved.

Atomistic models to investigate the hydrogen effect on mechanical properties

Deliverable for Task 7.3:Report on a quantum-mechanical level atomistic simulation scheme to investigate the hydrogen effect on mechanical properties.

Characterisation and simulation specification

Deliverable for Task 2.1, 2.2, and 2.3:Characterisation and simulation planned to achieve the goals of each use case

Data sets, microdata, etc (1)

Tomography and DCT

Deliverable for Task 6.1Data of the initial microstructure obtained by absorption tomography and by diffraction contrast tomogra-phy (when suitable i.e. non-strained stainless steel).

Publikacje

Peer reviewed articles (2)

"In-situ 3D X-ray tomography under high-pressure H <mml:math xmlns:mml=""http://www.w3.org/1998/Math/MathML"" altimg=""si47.svg"" display=""inline"" id=""d1e227""> <mml:msub> <mml:mrow/> <mml:mrow> <mml:mn>2</mml:mn> </mml:mrow> </mml:msub> </mml:math> : Direct observation and quantification of hydrogen-induced damage evolution in steel during tensile testing"

Autorzy: L.M. Santana, V. Okumko, A. King, L. Henry, C. Bolitt, S. Nicole, H. Proudhon, T.F. Morgeneyer, Y. Madi
Opublikowane w: International Journal of Hydrogen Energy, Numer 229, 2026, ISSN 0360-3199
Wydawca: Elsevier BV
DOI: 10.1016/J.IJHYDENE.2026.154770

LLM-supported collaborative ontology design for data and knowledge management platforms

Autorzy: Janis Kampars, Guntis Mosans, Tushar Jogi, Franz Roters, Napat Vajragupta
Opublikowane w: Frontiers in Big Data, Numer 8, 2025, ISSN 2624-909X
Wydawca: Frontiers Media SA
DOI: 10.3389/FDATA.2025.1676477