REcycling of low Value components using high purity pre-treatment, dIrecT recycling And green hydrometallurgical approaches for recycling of Lithium Ion and Sodium Ion BatteriEs

Informations projet

REVITALISE

N° de convention de subvention: 101137585

DOI

10.3030/101137585

Date de signature de la CE 11 Decembre 2023

Date de début 1 Novembre 2023

Date de fin 31 Octobre 2026

Financé au titre de

• Climate, Energy and Mobility

Coût total

€ 3 945 166,25

Contribution de l’UE

€ 3 945 166,25

Coordonné par

NORGES TEKNISK-NATURVITENSKAPELIGE UNIVERSITET NTNU
Norway

CORDIS fournit des liens vers les livrables publics et les publications des projets HORIZON.

Les liens vers les livrables et les publications des projets du 7e PC, ainsi que les liens vers certains types de résultats spécifiques tels que les jeux de données et les logiciels, sont récupérés dynamiquement sur OpenAIRE .

Livrables

Data sets, microdata, etc (3)

Requirements for hydrometallurgy

Chemical and physical characterization of feed material obtained from WP1, which consists of anode rich and cathode rich black mass, will be done. WP3 will specify the maximum purities required for hydrometallurgical process. Preliminary leaching test will be part of the characterization of feed material. The test results will be used as feedback in separation and grading process performed by WP1. This deliverable will be a result of Tasks 3.1 – 3.3.

Requirements for grading process

Development of grading processes for active material into high grade (as feed for direct recycling process) and low grade (as feed for hydrometallurgical process). The target of developed grading process as 40% of output material is classified as high grade. This deliverable will be a result of Tasks 1.2 – 1.6.

Requirements for direct recycling.

Direct recycling scheme from used battery active material will be developed, in which the target includes preservation of the active material structure. Optimization of the scheme will be based on the performance of active material produced, safety and commercial viability. This deliverable will be a result of Tasks 2.1 – 2.5.

Documents, reports (3)

Wastewater chemistry determined.

Psychochemical characterization of wastewater as feeds in water remediation and lithium extraction processes will be done. The characterization shall include metal concentration, COD, BOD, ammonia, phosphate and volatiles components among others. This deliverable will be a result of Task 4.1.

Definition use case

Determination of parameters that need to be achieved for project to be considered successful. This is specifically in relation to the quality and characteristics of input material in recycling process to make the recycling process close-looped. The final outputs will be identified to be benchmarked against initial definition. This deliverable will be a result of Task 1.1.

Plan for dissemination & exploitation-I

Plan for dissemination, exploitation and communication (PDEC), strategy, policy and KPIs will be agreed and recorded within PEDC. This deliverable will be a result of Tasks 6.1 – 6.6.

Data Management Plan (1)

DMP

Data management plan. This deliverable will be a result of Tasks 7.1 – 7.3.

Publications

Peer reviewed articles (3)

Pretreatment and Valorization of Critical Materials from Lithium‐Ion Batteries Using Electrostatic and Magnetic Separation

Auteurs: Hyeyeon Lee, Elizabeth H. Driscoll, Kristian Waters, Emma Kendrick, Roberto Sommerville
Publié dans: Advanced Energy and Sustainability Research, 2025, ISSN 2699-9412
Éditeur: Wiley
DOI: 10.1002/AESR.202400366

Sustainable Recovery and Reuse of Hard Carbon From Scrap and End‐of‐Life Sodium‐Ion Batteries

Auteurs: Bowen Liu, Tengfei Song, Lin Chen, Ashwin T. Shekhar, Marta Mirolo, Valentin Vinci, Jakub Drnec, Joel Cornelio, Dongrui Xie, Elizabeth H. Driscoll, Peter R. Slater, Emma Kendrick
Publié dans: Advanced Energy Materials, 2025, ISSN 1614-6832
Éditeur: Wiley
DOI: 10.1002/AENM.202405894

Direct Recycling of Li_xNi_0.5Mn_0.3Co_0.2O₂ from Production Scrap and End‐Of‐Life Batteries, Using Solid‐State Relithiation

Auteurs: Lucas Evangelista Sita, Roberto Sommerville, Giar Alsofi, Wilgner Lima da Silva, Dominika Gastol, Jair Scarminio, Emma Kendrick
Publié dans: Batteries & Supercaps, 2024, ISSN 2566-6223
Éditeur: Wiley
DOI: 10.1002/BATT.202400536