Skip to main content
Aller à la page d’accueil de la Commission européenne (s’ouvre dans une nouvelle fenêtre)
français fr
CORDIS - Résultats de la recherche de l’UE
CORDIS

TECHNOLOGY FOR EUROPEAN INDEPENDENCE IN SPACE IMAGE SENSOR

Description du projet

Améliorer la compétitivité et l’indépendance du secteur spatial européen

Le regain d’intérêt pour l’exploration, la surveillance et la sécurité des objets spatiaux a créé des conditions concurrentielles qui nécessitent un soutien aux jeunes entreprises et aux sociétés établies par le biais de programmes de financement. Cependant, si le secteur spatial des pays de l’UE ne reçoit pas à temps le soutien nécessaire, il aura du mal à rester compétitif. Le projet TENSIS, financé par l’UE, renforcera le savoir-faire des SIC spatiaux et garantira l’indépendance de l’ensemble de la chaîne industrielle. Il devient dès lors essentiel d’améliorer la chaîne de production par le biais du développement, de la validation et de la fabrication. La technologie CMOS-180 nm choisie doit permettre d’obtenir une résolution d’image élevée, être tolérante au rayonnement cosmique, rentable, personnalisable et adaptée aux applications spatiales. Le projet TENSIS stimulera la compétitivité européenne, profitera aux contractants principaux et aux fabricants d’équipements, et renforcera l’indépendance de l’UE vis-à-vis des fournisseurs étrangers.

Objectif

The objective of the Technology for European iNdependence in Space Image Sensors (TENSIS) project is to develop, manufacture, and validate a scalable, large-area, high-resolution, radiation tolerant, customizable, and affordable, 180nm CMOS detector, with the key technical characteristics of a 24K x 16K format matrix of 400MPixels.
The targeted pixel pitch is 3.5µm to keep the overall matrix manufacturable with the proposed X-Fab 0.18µm CMOS Image Sensor process, and with high Full Well Capacity.
Overall pixel electro-optical performances including MTF and spectral features will be enhanced by the design and implementation of specific optical stack in Back Side Illumination configuration, combining RGB&NIR filters with flat microlenses.
As a by product of the design of the 24K x 16K detector, a 4K x 4K detector will also be designed and manufactured by Te2v in FSI then BSI configuration. Te2v will package produced dies in PCB package and deliver them to Airbus Defence and Space in Toulouse for detailed functional electro-optical characterization. Before this characterization test campaign, Airbus will develop dedicated test means including proximity boards both matching with the 24K x 16K and the 4K x 4K detectors, in close cooperation with Tev.
A group of 4K x 4K BSI detectors initially electro-optically characterized by Airbus will then be delivered to ALTER, at Séville to be submitted to dedicated environmental tests, including TID, TNID and heavy ions radiation campaigns as well as burn-in and power on/off cycling tests. Thanks to this test campaign, the 4K x 4K detector die will reach TRL7 by the end of the project .
The project will further aim at creating a strategic competitive advantage for the European partners, prime and equipment manufacturers and reduce the dependence on critical technologies and capabilities from outside EU. It will rely on the X-Fab foundry, which is key for the TENSIS project.

Champ scientifique (EuroSciVoc)

Programme(s)

Thème(s)

Régime de financement

HORIZON-RIA - HORIZON Research and Innovation Actions

Voir tous les projets financés dans le cadre de ce programme de financement

Appel à propositions

(s’ouvre dans une nouvelle fenêtre) HORIZON-CL4-2024-SPACE-01

Voir tous les projets financés au titre de cet appel

Coordinateur

TELEDYNE E2V SEMICONDUCTORS SAS
Contribution nette de l'UE
€ 1 079 419,87
Adresse
AVENUE DE ROCHEPLEINE
38120 Saint Egreve
France
Région
Auvergne-Rhône-Alpes Rhône-Alpes Isère
Type d’activité
Private for-profit entities (excluding Higher or Secondary Education Establishments)
Liens
Coût total
Aucune donnée

Participants (4)