Skip to main content
Ir a la página de inicio de la Comisión Europea (se abrirá en una nueva ventana)
español es
CORDIS - Resultados de investigaciones de la UE
CORDIS

Flexible and Sustainable Thermoelectric Generators for Powering Wearable Biosensors

Descripción del proyecto

Generadores sostenibles de sulfuro de cobre para dispositivos portátiles sin batería

A medida que más pacientes recurren a biosensores portátiles que funcionan con pilas, surge la necesidad de encontrar formas eficientes de mantener su funcionamiento, ya que el mantenimiento constante resulta problemático y plantea dificultades adicionales para el medio ambiente debido a la eliminación de residuos de pilas. Con el apoyo de las acciones Marie Sklodowska Curie, el proyecto Flex-TEGs se centra en el desarrollo de fuentes de energía sostenibles y que no requieran mantenimiento mediante la creación de generadores termoeléctricos flexibles de película delgada que aprovechan la energía del calor corporal. El uso de sulfuro de cobre —un material abundante en la Tierra, no tóxico y reciclable— contribuye a resolver los problemas de eficiencia asociados a las tecnologías orgánicas e inorgánicas actuales. Se espera que el proceso de integración reduzca los costes de fabricación hasta en un 90 % en comparación con las soluciones convencionales de teluro de bismuto.

Objetivo

The global demand for wearable biosensors is rapidly increasing due to the growing need for remote-patient monitoring. A major challenge, however, is that these devices dependent on batteries, which require frequent replacement or recharging, raising challenges for usability, waste, and sustainability. The proposed research aims to address this limitation by developing flexible thin-film thermoelectric generators (FLEX-TEGs) capable of harvesting body heat to provide a continuous and maintenance-free power source for wearable biosensors.

Current research on flexible thermoelectrics has focused on either flexible organic materials with low thermoelectric efficiency or inorganic material which are efficient but scarce, toxic, and expensive. These limitations restrict large-scale adoption and neglect the recyclability of devices at end-of-life. To move beyond the state of the art, this project will explore copper sulfide (Cu2-xS, x = 0-1) thin films. This material is earth-abundant, non-toxic, low-cost, and recyclable, with promising thermoelectric properties at room temperature that remain largely unexplored in flexible form.

The project will fabricate p- and n-type copper sulfide thin films, integrate them into FLEX-TEGs, and assess their room-temperature power output and mechanical durability. Dr. Maryana Asaad brings strong expertise in thermoelectric materials and device fabrication, while Prof. Paolo Scardi and his team at the University of Trento provide internationally recognised expertise in energy materials and device engineering.

The outcomes will deliver new insights into the performance of sustainable thermoelectric thin films, establish design strategies for FLEX-TEGs, and demonstrate their suitability for powering biosensors. The impact will include cost reductions of up to 90% compared to the commercially used Bi2Te3-based devices, elimination of toxic elements, and advancement of greener, more sustainable healthcare technologies.

Ámbito científico (EuroSciVoc)

Palabras clave

Programa(s)

Tema(s)

Régimen de financiación

HORIZON-TMA-MSCA-PF-EF - HORIZON TMA MSCA Postdoctoral Fellowships - European Fellowships

Ver todos los proyectos financiados en el marco de este régimen de financiación

Convocatoria de propuestas

(se abrirá en una nueva ventana) HORIZON-MSCA-2025-PF

Ver todos los proyectos financiados en el marco de esta convocatoria

Coordinador

UNIVERSITA DEGLI STUDI DI TRENTO
Aportación neta de la UEn
€ 209 483,28
Dirección
VIA CALEPINA 14
38122 Trento
Italia
Región
Nord-Est Provincia Autonoma di Trento Trento
Tipo de actividad
Higher or Secondary Education Establishments
Enlaces
Coste total
Sin datos