Skip to main content
Vai all'homepage della Commissione europea (si apre in una nuova finestra)
italiano it
CORDIS - Risultati della ricerca dell’UE
CORDIS

Flexible and Sustainable Thermoelectric Generators for Powering Wearable Biosensors

Descrizione del progetto

Generatori sostenibili a solfuro di rame per dispositivi indossabili senza batteria

Poiché sempre più pazienti ricorrono a biosensori indossabili alimentati a batteria, è necessario trovare modi efficienti per garantirne il funzionamento, in quanto effettuare una manutenzione costante diventa problematico e pone ulteriori problemi ambientali legati allo smaltimento delle batterie. Sostenuto dal programma di azioni Marie Sklodowska Curie, il progetto Flex-TEGs si concentra sullo sviluppo di fonti energetiche sostenibili che non richiedono manutenzione attraverso la realizzazione di generatori termoelettrici a film sottile flessibili in grado di sfruttare l’energia del calore corporeo. L’uso del solfuro di rame, un materiale abbondante in natura, atossico e riciclabile, contribuisce a risolvere i problemi di efficienza associati alle attuali tecnologie organiche e inorganiche. Secondo le previsioni, il processo di integrazione ridurrebbe i costi di produzione fino al 90 % rispetto alle soluzioni convenzionali a base di tellururo di bismuto.

Obiettivo

The global demand for wearable biosensors is rapidly increasing due to the growing need for remote-patient monitoring. A major challenge, however, is that these devices dependent on batteries, which require frequent replacement or recharging, raising challenges for usability, waste, and sustainability. The proposed research aims to address this limitation by developing flexible thin-film thermoelectric generators (FLEX-TEGs) capable of harvesting body heat to provide a continuous and maintenance-free power source for wearable biosensors.

Current research on flexible thermoelectrics has focused on either flexible organic materials with low thermoelectric efficiency or inorganic material which are efficient but scarce, toxic, and expensive. These limitations restrict large-scale adoption and neglect the recyclability of devices at end-of-life. To move beyond the state of the art, this project will explore copper sulfide (Cu2-xS, x = 0-1) thin films. This material is earth-abundant, non-toxic, low-cost, and recyclable, with promising thermoelectric properties at room temperature that remain largely unexplored in flexible form.

The project will fabricate p- and n-type copper sulfide thin films, integrate them into FLEX-TEGs, and assess their room-temperature power output and mechanical durability. Dr. Maryana Asaad brings strong expertise in thermoelectric materials and device fabrication, while Prof. Paolo Scardi and his team at the University of Trento provide internationally recognised expertise in energy materials and device engineering.

The outcomes will deliver new insights into the performance of sustainable thermoelectric thin films, establish design strategies for FLEX-TEGs, and demonstrate their suitability for powering biosensors. The impact will include cost reductions of up to 90% compared to the commercially used Bi2Te3-based devices, elimination of toxic elements, and advancement of greener, more sustainable healthcare technologies.

Campo scientifico (EuroSciVoc)

Parole chiave

Programma(i)

Argomento(i)

Meccanismo di finanziamento

HORIZON-TMA-MSCA-PF-EF - HORIZON TMA MSCA Postdoctoral Fellowships - European Fellowships

Vedi tutti i progetti finanziati nell’ambito di questo schema di finanziamento

Invito a presentare proposte

(si apre in una nuova finestra) HORIZON-MSCA-2025-PF

Vedi tutti i progetti finanziati nell’ambito del bando

Coordinatore

UNIVERSITA DEGLI STUDI DI TRENTO
Contributo netto dell'UE
€ 209 483,28
Indirizzo
VIA CALEPINA 14
38122 Trento
Italia
Regione
Nord-Est Provincia Autonoma di Trento Trento
Tipo di attività
Higher or Secondary Education Establishments
Collegamenti
Costo totale
Nessun dato