Skip to main content
Ir a la página de inicio de la Comisión Europea (se abrirá en una nueva ventana)
español es
CORDIS - Resultados de investigaciones de la UE
CORDIS

Green Transformation of Steel Scrap into Next-Generation Ultra-High-Strength Steel through Advanced Process Design

Descripción del proyecto

Un futuro circular para el acero ecológico de alta resistencia

El acero de ultraalta resistencia, muy demandado en los sectores del transporte y la construcción, representa alrededor del 7 % del total de las emisiones. El equipo del proyecto REVALORISE-STEEL, que cuenta con el apoyo de las Acciones Marie Skłodowska-Curie, tiene como objetivo impulsar un cambio de paradigma hacia el diseño de aleaciones circulares. Utilizando como materia prima más del 90 % de chatarra ferrosa reciclada, en el proyecto se ofrecen aceros avanzados de alta resistencia que destacan por su extraordinaria resistencia y ductilidad. Mediante el uso del aprendizaje automático en estudios de alcance y tratamientos termomecánicos para adaptar microestructuras multifásicas complejas, en el proyecto se garantiza un desarrollo sostenible. Sin embargo, el proyecto va más allá de los descubrimientos científicos y aplica evaluaciones del ciclo de vida para reducir la huella de carbono en al menos un 60 %.

Objetivo

Steel remains the backbone of modern industry, but its manufacturing is one of the world's most carbon-hungry process, accounting for over 7% of worldwide emissions. With more effort directed towards achieving net-zero targets and with higher demand for ultra high-strength steels (UHSS) in transport, construction, and defence, there needs to be a radical shift in paradigm away from traditional extractive metallurgy and towards low-carbon, circular alloy design.

REVALORISE-STEEL addresses this by designing a revolutionary next generation of ultra-high strength steel (UTS > 1000 MPa, elongation > 20%), fabricated from over 90% recycled ferrous scrap material. The project targets the development of advanced plain carbon steel through modified multi-phase microstructures (ferrite, martensite, bainite, retained austenite) by the application of novel thermo-mechanical processing (TMP) techniques including hot rolling, intercritical annealing, and quenching & partitioning.

Among the innovations is using machine learning-based scoping of alloys with TMP verification via experimentally validated methods, accelerating alloy discovery and tailoring required microstructure and mechanical properties. The approach is based on deep understanding of phase transformation, microstructure evolution, corrosion resistance, and weldability. My research will target guiding model development, optimizing alloy processing, and performance validation against industrial standards.

Life Cycle Assessment (LCA) and techno-economic studies will evaluate the economic and environmental viability of these alloys, aiming to reduce the carbon content by over 60% compared to conventional Advanced High-Strength Steels (AHSS).

Supported by Imperial College London and industry collaborators and aligned with the UN Sustainable Development Goals (SDG 9, 12, and 13), this project is pioneering sustainable, circular steelmaking.

Ámbito científico (EuroSciVoc)

Palabras clave

Programa(s)

Tema(s)

Régimen de financiación

HORIZON-TMA-MSCA-PF-EF - HORIZON TMA MSCA Postdoctoral Fellowships - European Fellowships

Ver todos los proyectos financiados en el marco de este régimen de financiación

Convocatoria de propuestas

(se abrirá en una nueva ventana) HORIZON-MSCA-2025-PF

Ver todos los proyectos financiados en el marco de esta convocatoria

Coordinador

IMPERIAL COLLEGE OF SCIENCE TECHNOLOGY AND MEDICINE
Aportación neta de la UEn
€ 276 187,92
Dirección
SOUTH KENSINGTON CAMPUS EXHIBITION ROAD
SW7 2AZ London
Reino Unido
Región
London Inner London — West Westminster
Tipo de actividad
Higher or Secondary Education Establishments
Enlaces
Coste total
Sin datos