Skip to main content
Weiter zur Homepage der Europäischen Kommission (öffnet in neuem Fenster)
Deutsch de
CORDIS - Forschungsergebnisse der EU
CORDIS

Green Transformation of Steel Scrap into Next-Generation Ultra-High-Strength Steel through Advanced Process Design

Projektbeschreibung

Kreislauforientierte Zukunft für umweltfreundlichen hochfesten Stahl

Ultrahochfester Stahl, der im Verkehrs- und Bausektor sehr gefragt ist, ist für etwa 7 % aller Emissionen verantwortlich. Das Ziel des im Rahmen der Marie-Skłodowska-Curie-Maßnahmen unterstützten Projekts REVALORISE-STEEL besteht darin, einen Paradigmenwechsel hin zu einem kreislauforientierten Legierungsdesign herbeizuführen. Das Projektteam nutzt zu mehr als 90 % recycelten Eisenschrott als Rohstoff und bietet hochfeste Stähle von höchster Qualität an, die sich durch außergewöhnliche Festigkeit und Duktilität auszeichnen. Innerhalb des Projekts wird unter Einsatz von maschinellem Lernen bei Sondierungsstudien und thermomechanischen Behandlungen zur gezielten Gestaltung komplexer mehrphasiger Mikrostrukturen eine nachhaltige Entwicklung gewährleistet. Das Projektteam geht jedoch über wissenschaftliche Erkenntnisse hinaus und es werden Lebenszyklusanalysen angewandt, um die CO₂-Fußabdrücke um mindestens 60 % zu verkleinern.

Ziel

Steel remains the backbone of modern industry, but its manufacturing is one of the world's most carbon-hungry process, accounting for over 7% of worldwide emissions. With more effort directed towards achieving net-zero targets and with higher demand for ultra high-strength steels (UHSS) in transport, construction, and defence, there needs to be a radical shift in paradigm away from traditional extractive metallurgy and towards low-carbon, circular alloy design.

REVALORISE-STEEL addresses this by designing a revolutionary next generation of ultra-high strength steel (UTS > 1000 MPa, elongation > 20%), fabricated from over 90% recycled ferrous scrap material. The project targets the development of advanced plain carbon steel through modified multi-phase microstructures (ferrite, martensite, bainite, retained austenite) by the application of novel thermo-mechanical processing (TMP) techniques including hot rolling, intercritical annealing, and quenching & partitioning.

Among the innovations is using machine learning-based scoping of alloys with TMP verification via experimentally validated methods, accelerating alloy discovery and tailoring required microstructure and mechanical properties. The approach is based on deep understanding of phase transformation, microstructure evolution, corrosion resistance, and weldability. My research will target guiding model development, optimizing alloy processing, and performance validation against industrial standards.

Life Cycle Assessment (LCA) and techno-economic studies will evaluate the economic and environmental viability of these alloys, aiming to reduce the carbon content by over 60% compared to conventional Advanced High-Strength Steels (AHSS).

Supported by Imperial College London and industry collaborators and aligned with the UN Sustainable Development Goals (SDG 9, 12, and 13), this project is pioneering sustainable, circular steelmaking.

Wissenschaftliches Gebiet (EuroSciVoc)

Schlüsselbegriffe

Programm/Programme

Thema/Themen

Finanzierungsplan

HORIZON-TMA-MSCA-PF-EF - HORIZON TMA MSCA Postdoctoral Fellowships - European Fellowships

Alle im Rahmen dieses Finanzierungsinstruments finanzierten Projekte anzeigen

Aufforderung zur Vorschlagseinreichung

(öffnet in neuem Fenster) HORIZON-MSCA-2025-PF

Alle im Rahmen dieser Aufforderung zur Einreichung von Vorschlägen finanzierten Projekte anzeigen

Koordinator

IMPERIAL COLLEGE OF SCIENCE TECHNOLOGY AND MEDICINE
Netto-EU-Beitrag
€ 276 187,92
Adresse
SOUTH KENSINGTON CAMPUS EXHIBITION ROAD
SW7 2AZ London
Vereinigtes Königreich
Region
London Inner London — West Westminster
Aktivitätstyp
Higher or Secondary Education Establishments
Links
Gesamtkosten
Keine Daten